Re: [PATCH v2 4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx

[Sekhar Nori <nsekhar@ti.com>]

Hi Bart,

On 29/03/19 3:03 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> 
> Instead of directly using the vbus GPIO we should model it as a fixed
> regulator. Add all necessary fix-ups for the regulator to be registered
> and configure the vbus GPIO as its enable pin.
> 
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> ---
>  arch/arm/mach-davinci/board-omapl138-hawk.c | 49 +++++++++++++++++++--
>  1 file changed, 46 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
> index e244c8648594..0039b4d4c935 100644
> --- a/arch/arm/mach-davinci/board-omapl138-hawk.c
> +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
> @@ -21,6 +21,7 @@
>  #include <linux/platform_data/mtd-davinci.h>
>  #include <linux/platform_data/mtd-davinci-aemif.h>
>  #include <linux/platform_data/ti-aemif.h>
> +#include <linux/regulator/fixed.h>
>  #include <linux/regulator/machine.h>
>  
>  #include <asm/mach-types.h>
> @@ -298,15 +299,50 @@ static const short da850_hawk_usb11_pins[] = {
>  	-1
>  };
>  
> -static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
> +static struct regulator_consumer_supply hawk_usb_supplies[] = {
> +	REGULATOR_SUPPLY("vbus", NULL),
> +};
> +
> +static struct regulator_init_data hawk_usb_vbus_data = {
> +	.consumer_supplies	= hawk_usb_supplies,
> +	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
> +};
> +
> +static struct fixed_voltage_config hawk_usb_vbus = {
> +	.supply_name		= "vbus",
> +	.microvolts		= 3300000,
> +	.init_data		= &hawk_usb_vbus_data,
> +};
> +
> +static struct platform_device hawk_usb_vbus_device = {
> +	.name		= "reg-fixed-voltage",
> +	.id		= 1,

Can you explain choice of of 1 for id here? Its the first fixed
regulator being registered. Shouldn't it be 0?

Thanks,
Sekhar