mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexey Budankov <alexey.budankov@linux.intel.com>
To: Tvrtko Ursulin <tursulin@ursulin.net>, linux-kernel@vger.kernel.org
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Peter Zijlstra <peterz@infradead.org>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Arnaldo Carvalho de Melo <acme@kernel.org>,
	Alexander Shishkin <alexander.shishkin@linux.intel.com>,
	Jiri Olsa <jolsa@redhat.com>, Namhyung Kim <namhyung@kernel.org>,
	Madhavan Srinivasan <maddy@linux.vnet.ibm.com>,
	Andi Kleen <ak@linux.intel.com>,
	x86@kernel.org
Subject: Re: [RFC 3/4] perf: Allow per PMU access control
Date: Wed, 27 Jun 2018 15:58:32 +0300	[thread overview]
Message-ID: <8351504c-022a-e0d3-581d-a6a80b42607a@linux.intel.com> (raw)
In-Reply-To: <3b774f2e-56da-3d39-6fda-a4240a195377@ursulin.net>



On 27.06.2018 13:05, Tvrtko Ursulin wrote:
> 
> On 27/06/18 10:47, Alexey Budankov wrote:
>>
>>
>> On 27.06.2018 12:15, Tvrtko Ursulin wrote:
>>>
>>> On 26/06/18 18:25, Alexey Budankov wrote:
>>>> Hi,
>>>>
>>>> On 26.06.2018 18:36, Tvrtko Ursulin wrote:
>>>>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>>
>>>>> For situations where sysadmins might want to allow different level of
>>>>> access control for different PMUs, we start creating per-PMU
>>>>> perf_event_paranoid controls in sysfs.
>>>>>
>>>>> These work in equivalent fashion as the existing perf_event_paranoid
>>>>> sysctl, which now becomes the parent control for each PMU.
>>>>>
>>>>> On PMU registration the global/parent value will be inherited by each PMU,
>>>>> as it will be propagated to all registered PMUs when the sysctl is
>>>>> updated.
>>>>>
>>>>> At any later point individual PMU access controls, located in
>>>>> <sysfs>/device/<pmu-name>/perf_event_paranoid, can be adjusted to achieve
>>>>> fine grained access control.
>>>>>
>>>>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>>>> Cc: Peter Zijlstra <peterz@infradead.org>
>>>>> Cc: Ingo Molnar <mingo@redhat.com>
>>>>> Cc: "H. Peter Anvin" <hpa@zytor.com>
>>>>> Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
>>>>> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
>>>>> Cc: Jiri Olsa <jolsa@redhat.com>
>>>>> Cc: Namhyung Kim <namhyung@kernel.org>
>>>>> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
>>>>> Cc: Andi Kleen <ak@linux.intel.com>
>>>>> Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
>>>>> Cc: linux-kernel@vger.kernel.org
>>>>> Cc: x86@kernel.org
>>>>> ---
>>>>>    include/linux/perf_event.h | 12 ++++++--
>>>>>    kernel/events/core.c       | 59 ++++++++++++++++++++++++++++++++++++++
>>>>>    kernel/sysctl.c            |  4 ++-
>>>>>    3 files changed, 71 insertions(+), 4 deletions(-)
>>>>>
>>>>> diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
>>>>> index d7938d88c028..22e91cc2d9e1 100644
>>>>> --- a/include/linux/perf_event.h
>>>>> +++ b/include/linux/perf_event.h
>>>>> @@ -271,6 +271,9 @@ struct pmu {
>>>>>        /* number of address filters this PMU can do */
>>>>>        unsigned int            nr_addr_filters;
>>>>>    +    /* per PMU access control */
>>>>> +    int                perf_event_paranoid;
>>>>
>>>> It looks like it needs to be declared as atomic and atomic_read/atomic_write
>>>> operations need to be explicitly used below in the patch as far this
>>>> variable may be manipulated by different threads at the same time
>>>> without explicit locking.
>>>
>>> It is just a write of an integer from either sysfs access or sysctl. As such I don't think going atomic would change anything. There is no RMW or increment or anything on it.
>>>
>>> Unless there are architectures where int stores are not atomic? But then the existing sysctl would have the same issue. So I suspect we can indeed rely on int store being atomic.
>>
>> Yep, aligned word read/write is atomic on Intel and there is no runtime issue
>> currently, but the implementation itself is multithread and implicitly relies
>> on that atomicity so my suggestion is just explicitly code that assumption :).
>> Also, as you mentioned, that makes the arch independent part of code more portable.
> 
> Perhaps we are not on the same page, but my argument was that the current sysctl (or sysctl via proc) has the same issue with multiple threads potentially writing to it. 

Well, yes, currently the issue exists but it could be addressed in the new design.

As long as the end result is a valid value it is not a problem. So I don't see what this patch changes in that respect. Different tasks writing either of the sysctl/sysfs values race, but end up with valid values everywhere. If we can rely on int stores to be atomic on all architectures I don't see an effective difference after changing to atomic_t, or even taking the pmu mutex over the per PMU sysfs writes. So I don't see value in complicating the code with either approach but am happy to be proved wrong if that is the case.
> 
> Regards,
> 
> Tvrtko
> 

  reply	other threads:[~2018-06-27 12:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-26 15:36 [RFC 0/4] perf: Per PMU access controls (paranoid setting) Tvrtko Ursulin
2018-06-26 15:36 ` [RFC 1/4] perf: Move some access checks later in perf_event_open Tvrtko Ursulin
2018-06-26 17:24   ` Alexey Budankov
2018-06-27  9:00     ` Tvrtko Ursulin
2018-06-26 15:36 ` [RFC 2/4] perf: Pass pmu pointer to perf_paranoid_* helpers Tvrtko Ursulin
2018-07-03 10:24   ` Ravi Bangoria
2018-07-03 10:28     ` Tvrtko Ursulin
2018-06-26 15:36 ` [RFC 3/4] perf: Allow per PMU access control Tvrtko Ursulin
2018-06-26 17:25   ` Alexey Budankov
2018-06-27  9:15     ` Tvrtko Ursulin
2018-06-27  9:47       ` Alexey Budankov
2018-06-27 10:05         ` Tvrtko Ursulin
2018-06-27 12:58           ` Alexey Budankov [this message]
2018-06-26 15:36 ` [RFC 4/4] perf Documentation: Document the per PMU perf_event_paranoid interface Tvrtko Ursulin
2018-06-27 20:46 ` [RFC 0/4] perf: Per PMU access controls (paranoid setting) Jiri Olsa
2018-09-12  6:52 ` Alexey Budankov
2018-09-12  8:41   ` Tvrtko Ursulin
2018-09-12 16:19     ` Alexey Budankov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8351504c-022a-e0d3-581d-a6a80b42607a@linux.intel.com \
    --to=alexey.budankov@linux.intel.com \
    --cc=acme@kernel.org \
    --cc=ak@linux.intel.com \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=jolsa@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maddy@linux.vnet.ibm.com \
    --cc=mingo@redhat.com \
    --cc=namhyung@kernel.org \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=tursulin@ursulin.net \
    --cc=tvrtko.ursulin@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome