From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751066AbWCKWCR (ORCPT ); Sat, 11 Mar 2006 17:02:17 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751108AbWCKWCQ (ORCPT ); Sat, 11 Mar 2006 17:02:16 -0500 Received: from fw.bitband.com ([213.8.50.174]:4938 "EHLO mail1.bitband.com") by vger.kernel.org with ESMTP id S1751066AbWCKWCQ convert rfc822-to-8bit (ORCPT ); Sat, 11 Mar 2006 17:02:16 -0500 X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT Subject: RE: Problem with sata driver Date: Sun, 12 Mar 2006 00:03:30 +0200 Message-ID: <83CA05F64804AF43B8F733C4ABDFAA51010DF25A@mail1.bitband.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Problem with sata driver Thread-Index: AcZFIDE/3HxiWHBhQvOaMf+N5heEqgANz2IQ From: "Sion Khalaf" To: "Ed Tomlinson" , Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Amd 64, with Slackware 9.1 Any ideas ? 10x -----Original Message----- From: Ed Tomlinson [mailto:edt@aei.ca] Sent: Saturday, March 11, 2006 5:25 PM To: Sion Khalaf Subject: Re: Problem with sata driver Debian? amd64? I got the same same errors with debain install disks.... gentoo had no problems. Ed Tomlinson On Saturday 11 March 2006 10:08, you wrote: > Hi, > > I am having problem with Sata Drive /dev/sda > > Board from SuperMicro With Nvidia ChipSet - H8DCE The board has 8 x > SATA ports, but only one SATA Drive is connected (Maxtor 500 GB ) > > Kernel 2.6.15 > I insert the module : insmod sata_nv.ko Then, udevstart > > Fdisk Output: > ------------------------------------------------------------------- > [root@880-TEST root]$ fdisk -l > > Disk /dev/hda: 262 MB, 262144000 bytes > 16 heads, 32 sectors/track, 1000 cylinders Units = cylinders of 512 * > 512 = 262144 bytes > > Device Boot Start End Blocks Id System > /dev/hda1 * 1 998 255487+ 83 Linux > > Disk /dev/sda: 500.1 GB, 500107862016 bytes > 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of > 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System > [root@880-TEST root]$ > > ---------------------------------------------------------------------- > -- > ---- > When trying to repartition the disk, I got into hangs. > (Trying to save changes - w ) > > Attached is the dmesg, since inserting the module. > > What is wrong ? > > Thank you in advanced, > Sion > > ********************************************************************** > ** > ********** > > sata_nv 0000:00:07.0: version 0.8 > ACPI: PCI Interrupt Link [LTID] enabled at IRQ 11 > PCI: setting IRQ 11 as level-triggered > ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 11 (level, > low) -> IRQ 11 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 11 > ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 11 > ata1: no device found (phy stat 00000000) scsi0 : sata_nv > ata2: no device found (phy stat 00000000) > scsi1 : sata_nv > ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 9 > ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 9 (level, > low) > -> IRQ 9 > PCI: Setting latency timer of device 0000:00:08.0 to 64 > ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 9 > ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 9 > ata3: no device found (phy stat 00000000) > scsi2 : sata_nv > nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c69 86:3e01 > 87:4763 88:407f > ata4: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48 > nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > ata4: dev 0 configured for UDMA/133 > scsi3 : sata_nv > Vendor: ATA Model: Maxtor 7H500F0 Rev: HA43 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI > device sda: drive cache: write back SCSI device sda: 976773168 > 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write > back > sda:<4>nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > > sd 3:0:0:0: Attached scsi disk sda > sd 3:0:0:0: Attached scsi generic sg0 type 0 > ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LNKB] -> GSI 9 (level, > low) > -> IRQ 9 > PCI: Setting latency timer of device 0000:80:07.0 to 64 > ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 9 > ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 9 > ata5: no device found (phy stat 00000000) > scsi4 : sata_nv > ata6: no device found (phy stat 00000000) > scsi5 : sata_nv > ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LNKA] -> GSI 9 (level, > low) > -> IRQ 9 > PCI: Setting latency timer of device 0000:80:08.0 to 64 > ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 9 > ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 9 > nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > nv_sata: Primary device added > nv_sata: Primary device removed > nv_sata: Secondary device added > nv_sata: Secondary device removed > ata7: no device found (phy stat 00000000) > scsi6 : sata_nv > ata8: no device found (phy stat 00000000) > scsi7 : sata_nv > ata4: command 0x35 timeout, stat 0xd0 host_stat 0x21 > ata4: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 > ata4: status=0xd0 { Busy } > sd 3:0:0:0: SCSI error: return code = 0x8000002 > sda: Current: sense key=0xb > ASC=0x47 ASCQ=0x0 > end_request: I/O error, dev sda, sector 0 Buffer I/O error on device > sda, logical block 0 lost page write due to I/O error on sda SCSI > device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device > sda: drive cache: write back > sda:<4>ATA: abnormal status 0xD0 on port 0xAC07 > ATA: abnormal status 0xD0 on port 0xAC07 > ATA: abnormal status 0xD0 on port 0xAC07 [root@880-TEST root]$ > ********************************************************************** > ** > ********* > - > To unsubscribe from this list: send the line "unsubscribe > linux-kernel" in the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > >