Re: [PATCH v2 15/15] ARM: dts: microchip: add shutdown controller and rtt timer

[Claudiu Beznea <claudiu.beznea@tuxon.dev>]

Hi, Ryan,

On 10.02.2025 23:13, Ryan.Wanner@microchip.com wrote:
> From: Ryan Wanner <Ryan.Wanner@microchip.com>
> 
> Add shutdown controller and rtt timer to support shutdown and wake up.

Also, split it in 2 patches:

1/ add rtt timer
2/ Enable shdwc

> 
> Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
> ---
>  .../boot/dts/microchip/at91-sama7d65_curiosity.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> index 0f86360fb733a..d1d0b06fbfc43 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
> @@ -77,6 +77,11 @@ pinctrl_uart6_default: uart6-default {
>  	};
>  };
>  
> +&rtt {
> +	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
> +	status = "disabled";

Any reason for keeping this node disabled?

> +};
> +
>  &sdmmc1 {
>  	bus-width = <4>;
>  	pinctrl-names = "default";
> @@ -84,6 +89,15 @@ &sdmmc1 {
>  	status = "okay";
>  };
>  
> +&shdwc {
> +	debounce-delay-us = <976>;
> +	status = "okay";
> +
> +	input@0 {
> +		reg = <0>;
> +	};
> +};
> +
>  &slow_xtal {
>  	clock-frequency = <32768>;
>  };