From: Armin Wolf <W_Armin@gmx.de>
To: Antheas Kapenekakis <lkml@antheas.dev>,
platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
"Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Derek John Clark" <derekjohn.clark@gmail.com>,
"Joaquín Ignacio Aramendía" <samsagax@gmail.com>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>
Subject: Re: [PATCH v3 6/6] platform/x86: ayaneo-ec: Add suspend hook
Date: Sun, 2 Nov 2025 19:35:12 +0100 [thread overview]
Message-ID: <83b004ce-b34e-41a4-b35d-1f24056ac60a@gmx.de> (raw)
In-Reply-To: <20251031163651.1465981-7-lkml@antheas.dev>
Am 31.10.25 um 17:36 schrieb Antheas Kapenekakis:
> The Ayaneo EC resets after hibernation, losing the charge control state.
> Add a small PM hook to restore this state on hibernation resume.
>
> The fan speed is also lost during hibernation, but since hibernation
> failures are common with this class of devices, setting a low fan speed
> when the userspace program controlling the fan will potentially not
> take over could cause the device to overheat, so it is not restored.
Please update the patch description.
>
> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
> ---
> drivers/platform/x86/ayaneo-ec.c | 73 ++++++++++++++++++++++++++++++++
> 1 file changed, 73 insertions(+)
>
> diff --git a/drivers/platform/x86/ayaneo-ec.c b/drivers/platform/x86/ayaneo-ec.c
> index 9548e3d22093..e1ad5968d3b4 100644
> --- a/drivers/platform/x86/ayaneo-ec.c
> +++ b/drivers/platform/x86/ayaneo-ec.c
> @@ -41,6 +41,8 @@
> #define AYANEO_MODULE_LEFT BIT(0)
> #define AYANEO_MODULE_RIGHT BIT(1)
>
> +#define AYANEO_CACHE_LEN 1
> +
> struct ayaneo_ec_quirk {
> bool has_fan_control;
> bool has_charge_control;
> @@ -51,6 +53,9 @@ struct ayaneo_ec_platform_data {
> struct platform_device *pdev;
> struct ayaneo_ec_quirk *quirks;
> struct acpi_battery_hook battery_hook;
> +
> + bool restore_charge_limit;
> + bool restore_pwm;
> };
>
> static const struct ayaneo_ec_quirk quirk_fan = {
> @@ -207,10 +212,14 @@ static int ayaneo_ec_read(struct device *dev, enum hwmon_sensor_types type,
> static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
> u32 attr, int channel, long val)
> {
> + struct ayaneo_ec_platform_data *data = platform_get_drvdata(
> + to_platform_device(dev));
> + int ret;
> switch (type) {
> case hwmon_pwm:
> switch (attr) {
> case hwmon_pwm_enable:
> + data->restore_pwm = false;
> switch (val) {
> case 1:
> return ec_write(AYANEO_PWM_ENABLE_REG,
> @@ -224,6 +233,15 @@ static int ayaneo_ec_write(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_pwm_input:
> if (val < 0 || val > 255)
> return -EINVAL;
> + if (data->restore_pwm) {
> + // Defer restoring PWM control to after
> + // userspace resumes successfully
> + ret = ec_write(AYANEO_PWM_ENABLE_REG,
> + AYANEO_PWM_MODE_MANUAL);
> + if (ret)
> + return ret;
> + data->restore_pwm = false;
I suspect that you need to use a mutex to protect the restore sequence.
Thanks,
Armin Wolf
> + }
> return ec_write(AYANEO_PWM_REG, (val * 100) / 255);
> default:
> break;
> @@ -474,10 +492,65 @@ static int ayaneo_ec_probe(struct platform_device *pdev)
> return 0;
> }
>
> +static int ayaneo_freeze(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> + int ret;
> + u8 tmp;
> +
> + if (data->quirks->has_charge_control) {
> + ret = ec_read(AYANEO_CHARGE_REG, &tmp);
> + if (ret)
> + return ret;
> +
> + data->restore_charge_limit = tmp == AYANEO_CHARGE_VAL_INHIBIT;
> + }
> +
> + if (data->quirks->has_fan_control) {
> + ret = ec_read(AYANEO_PWM_ENABLE_REG, &tmp);
> + if (ret)
> + return ret;
> +
> + data->restore_pwm = tmp == AYANEO_PWM_MODE_MANUAL;
> +
> + // Release the fan when entering hibernation to avoid
> + // overheating if hibernation fails and hangs
> + if (data->restore_pwm) {
> + ret = ec_write(AYANEO_PWM_ENABLE_REG, AYANEO_PWM_MODE_AUTO);
> + if (ret)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int ayaneo_restore(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct ayaneo_ec_platform_data *data = platform_get_drvdata(pdev);
> + int ret;
> +
> + if (data->quirks->has_charge_control && data->restore_charge_limit) {
> + ret = ec_write(AYANEO_CHARGE_REG, AYANEO_CHARGE_VAL_INHIBIT);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops ayaneo_pm_ops = {
> + .freeze = ayaneo_freeze,
> + .restore = ayaneo_restore,
> +};
> +
> static struct platform_driver ayaneo_platform_driver = {
> .driver = {
> .name = "ayaneo-ec",
> .dev_groups = ayaneo_ec_groups,
> + .pm = &ayaneo_pm_ops,
> },
> .probe = ayaneo_ec_probe,
> };
next prev parent reply other threads:[~2025-11-02 18:35 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-31 16:36 [PATCH v3 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Antheas Kapenekakis
2025-10-31 16:36 ` [PATCH v3 1/6] " Antheas Kapenekakis
2025-11-02 18:21 ` Armin Wolf
2025-11-02 18:35 ` Armin Wolf
2025-11-02 18:37 ` Antheas Kapenekakis
2025-11-04 19:58 ` Armin Wolf
2025-10-31 16:36 ` [PATCH v3 2/6] platform/x86: ayaneo-ec: Add hwmon support Antheas Kapenekakis
2025-11-02 18:22 ` Armin Wolf
2025-10-31 16:36 ` [PATCH v3 3/6] platform/x86: ayaneo-ec: Add charge control support Antheas Kapenekakis
2025-11-02 18:26 ` Armin Wolf
[not found] ` <CAGwozwHfaeOnMmLbAK03gzG2JCsZ=TDAv3EMyDoBZRtG=ix5ng@mail.gmail.com>
2025-11-04 20:00 ` Armin Wolf
2025-10-31 16:36 ` [PATCH v3 4/6] platform/x86: ayaneo-ec: Add controller power and modules attributes Antheas Kapenekakis
2025-11-02 18:30 ` Armin Wolf
2025-11-02 18:46 ` Antheas Kapenekakis
2025-11-04 20:03 ` Armin Wolf
2025-11-05 12:33 ` Antheas Kapenekakis
2025-11-05 13:24 ` Ilpo Järvinen
2025-11-05 13:38 ` Antheas Kapenekakis
2025-11-05 22:20 ` Armin Wolf
2025-10-31 16:36 ` [PATCH v3 5/6] platform/x86: ayaneo-ec: Move Ayaneo devices from oxpec to ayaneo-ec Antheas Kapenekakis
2025-10-31 16:36 ` [PATCH v3 6/6] platform/x86: ayaneo-ec: Add suspend hook Antheas Kapenekakis
2025-11-02 18:35 ` Armin Wolf [this message]
2025-11-02 18:58 ` Antheas Kapenekakis
2025-11-10 12:11 ` Ilpo Järvinen
2025-11-03 16:51 ` Mario Limonciello (AMD) (kernel.org)
2025-11-03 21:20 ` Antheas Kapenekakis
2025-11-03 21:33 ` Mario Limonciello (AMD) (kernel.org)
2025-11-03 22:09 ` Antheas Kapenekakis
2025-10-31 16:38 ` [PATCH v3 0/6] platform/x86: ayaneo-ec: Add Ayaneo Embedded Controller platform driver Antheas Kapenekakis
2025-10-31 16:39 ` Antheas Kapenekakis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83b004ce-b34e-41a4-b35d-1f24056ac60a@gmx.de \
--to=w_armin@gmx.de \
--cc=derekjohn.clark@gmail.com \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkml@antheas.dev \
--cc=platform-driver-x86@vger.kernel.org \
--cc=samsagax@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®