mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Alexandra Diupina <adiupina@astralinux.ru>,
	Zhao Qiang <qiang.zhao@nxp.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	"David S. Miller" <davem@davemloft.net>,
	"lvc-project@linuxtesting.org" <lvc-project@linuxtesting.org>
Subject: Re: [PATCH v4] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close()
Date: Mon, 4 Sep 2023 17:04:49 +0000	[thread overview]
Message-ID: <83bc012b-4514-fac0-3b72-651c76ed2165@csgroup.eu> (raw)
In-Reply-To: <1005f190-8c03-bb5d-214c-c7fca9dd876b@csgroup.eu>



Le 04/09/2023 à 19:03, Christophe Leroy a écrit :
> 
> 
> Le 04/09/2023 à 14:31, Alexandra Diupina a écrit :
>> Process the result of hdlc_open() and call uhdlc_close()
>> in case of an error. It is necessary to pass the error
>> code up the control flow, similar to a possible
>> error in request_irq().
>> Also add a hdlc_close() call to the uhdlc_close()
>> because the comment to hdlc_close() says it must be called
>> by the hardware driver when the HDLC device is being closed
>>
>> Found by Linux Verification Center (linuxtesting.org) with SVACE.
>>
>> Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
>> Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
>> ---
>> v4: undo all the things done prior to hdlc_open() as
>> Jakub Kicinski <kuba@kernel.org> suggested,
>> add hdlc_close() call to the uhdlc_close() to match the function comment,
>> add uhdlc_close() declaration to the top of the file not to put the
>> uhdlc_close() function definition before uhdlc_open()
>> v3: Fix the commits tree
>> v2: Remove the 'rc' variable (stores the return value of the
>> hdlc_open()) as Christophe Leroy <christophe.leroy@csgroup.eu> suggested
>>   drivers/net/wan/fsl_ucc_hdlc.c | 8 +++++++-
>>   1 file changed, 7 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wan/fsl_ucc_hdlc.c 
>> b/drivers/net/wan/fsl_ucc_hdlc.c
>> index 47c2ad7a3e42..fd999dabdd39 100644
>> --- a/drivers/net/wan/fsl_ucc_hdlc.c
>> +++ b/drivers/net/wan/fsl_ucc_hdlc.c
>> @@ -34,6 +34,8 @@
>>   #define TDM_PPPOHT_SLIC_MAXIN
>>   #define RX_BD_ERRORS (R_CD_S | R_OV_S | R_CR_S | R_AB_S | R_NO_S | 
>> R_LG_S)
>> +static int uhdlc_close(struct net_device *dev);
>> +
>>   static struct ucc_tdm_info utdm_primary_info = {
>>       .uf_info = {
>>           .tsa = 0,
>> @@ -731,7 +733,9 @@ static int uhdlc_open(struct net_device *dev)
>>           napi_enable(&priv->napi);
>>           netdev_reset_queue(dev);
>>           netif_start_queue(dev);
>> -        hdlc_open(dev);
>> +
>> +        int rc = hdlc_open(dev);
> 
> Do not mix declarations and code. Please put all declaration at the top 
> of the block.
> 
>> +        return rc == 0 ? 0 : (uhdlc_close(dev), rc);
>>       }
> 
> That's not easy to read.
> 
> I know that's more changes, but I'd prefer something like:
> 
> static int uhdlc_open(struct net_device *dev)
> {
>      u32 cecr_subblock;
>      hdlc_device *hdlc = dev_to_hdlc(dev);
>      struct ucc_hdlc_private *priv = hdlc->priv;
>      struct ucc_tdm *utdm = priv->utdm;
>      int rc;
> 
>      if (priv->hdlc_busy != 1)

Of course should be:

	if (priv->hdlc_busy == 1)

>          return 0;
> 
>      if (request_irq(priv->ut_info->uf_info.irq,
>              ucc_hdlc_irq_handler, 0, "hdlc", priv))
>          return -ENODEV;
> 
>      cecr_subblock = ucc_fast_get_qe_cr_subblock(
>                  priv->ut_info->uf_info.ucc_num);
> 
>      qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
>               QE_CR_PROTOCOL_UNSPECIFIED, 0);
> 
>      ucc_fast_enable(priv->uccf, COMM_DIR_RX | COMM_DIR_TX);
> 
>      /* Enable the TDM port */
>      if (priv->tsa)
>          qe_setbits_8(&utdm->si_regs->siglmr1_h, 0x1 << utdm->tdm_port);
> 
>      priv->hdlc_busy = 1;
>      netif_device_attach(priv->ndev);
>      napi_enable(&priv->napi);
>      netdev_reset_queue(dev);
>      netif_start_queue(dev);
> 
>      rc = hdlc_open(dev);
>      if (rc)
>          uhdlc_close(dev);
> 
>      return rc;
> }
> 
> 
> 
>>       return 0;
>> @@ -824,6 +828,8 @@ static int uhdlc_close(struct net_device *dev)
>>       netdev_reset_queue(dev);
>>       priv->hdlc_busy = 0;
>> +    hdlc_close(dev);
>> +
>>       return 0;
>>   }
> 
> 
> And while you are looking at the correctness of this code, is it sure 
> that uhdlc_open() cannot be called twice in parallele ?
> If it can be called in parallèle I think the "if (priv->hdlc_busy != 1)" 
> should be replaced by something using cmpxchg()

  reply	other threads:[~2023-09-04 17:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-25 14:31 [PATCH] fsl_ucc_hdlc: add a check of the return value from hdlc_open Alexandra Diupina
2023-08-26  6:32 ` Christophe Leroy
2023-08-28  8:27   ` [PATCH v2] " Alexandra Diupina
2023-08-28  8:37     ` Christophe Leroy
2023-08-28 12:12       ` [PATCH v3] fsl_ucc_hdlc: process the result of hold_open() Alexandra Diupina
2023-08-28 13:11         ` Christophe Leroy
2023-08-28 19:38         ` Jakub Kicinski
2023-09-01 10:48           ` Александра Дюпина
2023-09-01 11:05             ` Denis Kirjanov
2023-09-04 12:31               ` [PATCH v4] drivers/net: process the result of hdlc_open() and add call of hdlc_close() in uhdlc_close() Alexandra Diupina
2023-09-04 17:03                 ` Christophe Leroy
2023-09-04 17:04                   ` Christophe Leroy [this message]
2023-09-05 10:46                   ` Paolo Abeni
2023-09-19 14:25                     ` [PATCH v5] " Alexandra Diupina
2023-09-22  7:09                       ` Christophe Leroy
2023-09-22  7:20                       ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=83bc012b-4514-fac0-3b72-651c76ed2165@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=adiupina@astralinux.ru \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lvc-project@linuxtesting.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=qiang.zhao@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®