From: David Hildenbrand <david@redhat.com>
To: Baoquan He <bhe@redhat.com>, linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org, mhocko@suse.com,
richardw.yang@linux.intel.com, dan.j.williams@intel.com,
osalvador@suse.de, rppt@linux.ibm.com
Subject: Re: [PATCH v3 6/7] mm/sparse.c: move subsection_map related codes together
Date: Mon, 9 Mar 2020 10:08:27 +0100 [thread overview]
Message-ID: <8462ca2b-822f-52c0-5986-93377d252fac@redhat.com> (raw)
In-Reply-To: <20200307084229.28251-7-bhe@redhat.com>
On 07.03.20 09:42, Baoquan He wrote:
> No functional change.
>
> Signed-off-by: Baoquan He <bhe@redhat.com>
> ---
> mm/sparse.c | 134 +++++++++++++++++++++++++---------------------------
> 1 file changed, 65 insertions(+), 69 deletions(-)
>
> diff --git a/mm/sparse.c b/mm/sparse.c
> index 0fbd79c4ad81..fde651ab8741 100644
> --- a/mm/sparse.c
> +++ b/mm/sparse.c
> @@ -244,10 +244,75 @@ void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
> nr_pages -= pfns;
> }
> }
> +
> +static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
> +{
> + DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> + DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
> + struct mem_section *ms = __pfn_to_section(pfn);
> + unsigned long *subsection_map = ms->usage
> + ? &ms->usage->subsection_map[0] : NULL;
> +
> + subsection_mask_set(map, pfn, nr_pages);
> + if (subsection_map)
> + bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
> +
> + if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
> + "section already deactivated (%#lx + %ld)\n",
> + pfn, nr_pages))
> + return -EINVAL;
> +
> + bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
> +
> + return 0;
> +}
> +
> +static bool is_subsection_map_empty(struct mem_section *ms)
> +{
> + return bitmap_empty(&ms->usage->subsection_map[0],
> + SUBSECTIONS_PER_SECTION);
> +}
> +
> +static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
> +{
> + struct mem_section *ms = __pfn_to_section(pfn);
> + DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> + unsigned long *subsection_map;
> + int rc = 0;
> +
> + subsection_mask_set(map, pfn, nr_pages);
> +
> + subsection_map = &ms->usage->subsection_map[0];
> +
> + if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
> + rc = -EINVAL;
> + else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
> + rc = -EEXIST;
> + else
> + bitmap_or(subsection_map, map, subsection_map,
> + SUBSECTIONS_PER_SECTION);
> +
> + return rc;
> +}
> #else
> void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
> {
> }
> +
> +static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
> +{
> + return 0;
> +}
> +
> +static bool is_subsection_map_empty(struct mem_section *ms)
> +{
> + return true;
> +}
> +
> +static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
> +{
> + return 0;
> +}
> #endif
>
> /* Record a memory area against a node. */
> @@ -732,46 +797,6 @@ static void free_map_bootmem(struct page *memmap)
> }
> #endif /* CONFIG_SPARSEMEM_VMEMMAP */
>
> -#ifdef CONFIG_SPARSEMEM_VMEMMAP
> -static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
> -{
> - DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> - DECLARE_BITMAP(tmp, SUBSECTIONS_PER_SECTION) = { 0 };
> - struct mem_section *ms = __pfn_to_section(pfn);
> - unsigned long *subsection_map = ms->usage
> - ? &ms->usage->subsection_map[0] : NULL;
> -
> - subsection_mask_set(map, pfn, nr_pages);
> - if (subsection_map)
> - bitmap_and(tmp, map, subsection_map, SUBSECTIONS_PER_SECTION);
> -
> - if (WARN(!subsection_map || !bitmap_equal(tmp, map, SUBSECTIONS_PER_SECTION),
> - "section already deactivated (%#lx + %ld)\n",
> - pfn, nr_pages))
> - return -EINVAL;
> -
> - bitmap_xor(subsection_map, map, subsection_map, SUBSECTIONS_PER_SECTION);
> -
> - return 0;
> -}
> -
> -static bool is_subsection_map_empty(struct mem_section *ms)
> -{
> - return bitmap_empty(&ms->usage->subsection_map[0],
> - SUBSECTIONS_PER_SECTION);
> -}
> -#else
> -static int clear_subsection_map(unsigned long pfn, unsigned long nr_pages)
> -{
> - return 0;
> -}
> -
> -static bool is_subsection_map_empty(struct mem_section *ms)
> -{
> - return true;
> -}
> -#endif
> -
> /*
> * To deactivate a memory region, there are 3 cases to handle across
> * two configurations (SPARSEMEM_VMEMMAP={y,n}):
> @@ -826,35 +851,6 @@ static void section_deactivate(unsigned long pfn, unsigned long nr_pages,
> ms->section_mem_map = (unsigned long)NULL;
> }
>
> -#ifdef CONFIG_SPARSEMEM_VMEMMAP
> -static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
> -{
> - struct mem_section *ms = __pfn_to_section(pfn);
> - DECLARE_BITMAP(map, SUBSECTIONS_PER_SECTION) = { 0 };
> - unsigned long *subsection_map;
> - int rc = 0;
> -
> - subsection_mask_set(map, pfn, nr_pages);
> -
> - subsection_map = &ms->usage->subsection_map[0];
> -
> - if (bitmap_empty(map, SUBSECTIONS_PER_SECTION))
> - rc = -EINVAL;
> - else if (bitmap_intersects(map, subsection_map, SUBSECTIONS_PER_SECTION))
> - rc = -EEXIST;
> - else
> - bitmap_or(subsection_map, map, subsection_map,
> - SUBSECTIONS_PER_SECTION);
> -
> - return rc;
> -}
> -#else
> -static int fill_subsection_map(unsigned long pfn, unsigned long nr_pages)
> -{
> - return 0;
> -}
> -#endif
> -
> static struct page * __meminit section_activate(int nid, unsigned long pfn,
> unsigned long nr_pages, struct vmem_altmap *altmap)
> {
>
IMHO, we don't need this patch - but just my personal opinion. Change
itself looks good on a quick glance.
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2020-03-09 9:08 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-07 8:42 [PATCH v3 0/7] mm/hotplug: Only use subsection map for VMEMMAP Baoquan He
2020-03-07 8:42 ` [PATCH v3 1/7] mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case Baoquan He
2020-03-07 20:59 ` Andrew Morton
2020-03-07 22:55 ` Baoquan He
2020-03-09 8:56 ` David Hildenbrand
2020-03-09 8:58 ` David Hildenbrand
2020-03-09 13:18 ` Baoquan He
2020-03-09 13:22 ` David Hildenbrand
2020-03-09 10:13 ` Pankaj Gupta
2020-03-09 12:56 ` Michal Hocko
2020-03-07 8:42 ` [PATCH v3 2/7] mm/sparse.c: introduce new function fill_subsection_map() Baoquan He
2020-03-07 8:42 ` [PATCH v3 3/7] mm/sparse.c: introduce a new function clear_subsection_map() Baoquan He
2020-03-09 8:59 ` David Hildenbrand
2020-03-09 13:32 ` Baoquan He
2020-03-09 13:38 ` David Hildenbrand
2020-03-09 14:07 ` Baoquan He
2020-03-07 8:42 ` [PATCH v3 4/7] mm/sparse.c: only use subsection map in VMEMMAP case Baoquan He
2020-03-09 9:00 ` David Hildenbrand
2020-03-07 8:42 ` [PATCH v3 5/7] mm/sparse.c: add note about only VMEMMAP supporting sub-section support Baoquan He
2020-03-07 11:55 ` Baoquan He
2020-03-10 14:46 ` Michal Hocko
2020-03-11 4:20 ` Baoquan He
2020-03-07 8:42 ` [PATCH v3 6/7] mm/sparse.c: move subsection_map related codes together Baoquan He
2020-03-09 9:08 ` David Hildenbrand [this message]
2020-03-09 13:41 ` Baoquan He
2020-03-07 8:42 ` [PATCH v3 7/7] mm/sparse.c: Use __get_free_pages() instead in populate_section_memmap() Baoquan He
2020-03-10 14:56 ` Michal Hocko
2020-03-10 14:59 ` David Hildenbrand
2020-03-11 9:31 ` Baoquan He
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8462ca2b-822f-52c0-5986-93377d252fac@redhat.com \
--to=david@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=bhe@redhat.com \
--cc=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=richardw.yang@linux.intel.com \
--cc=rppt@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome