From: Armin Wolf <W_Armin@gmx.de>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: Hans de Goede <hansg@kernel.org>,
platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
teolyub@gmail.com
Subject: Re: [PATCH 1/2] platform/x86: dell: Add new dell-wmi-pega driver
Date: Tue, 17 Nov 2026 23:30:52 +0100 [thread overview]
Message-ID: <848ebb18-b9bf-4747-9403-fa8da4fba2ad@gmx.de> (raw)
In-Reply-To: <f71860dd-cf85-ddd9-8e47-7279205f46ab@linux.intel.com>
Am 17.11.26 um 23:17 schrieb Ilpo Järvinen:
> On Tue, 17 Nov 2026, Armin Wolf wrote:
>
>> A user has reported that the WMI hotkey events on Dell All-In-One
>> machines need to be manually enabled on some models thru a separate
>> WMI device. This WMI device seems to be present on many other models
>> but has no effect on them.
>
> Can you rephrase this to not textually depend on "user" or "user's
> report", just state what the problem is, not how you became aware of it.
>
>> Add a small driver for enabling support for this WMI device. This
>> enables the HDMI Input key on the Dell OptiPlex 7400 All-in-One
>> machine.
>>
>> Reported-by: Teodora <teolyub@gmail.com>
>> Closes: https://lore.kernel.org/platform-driver-x86/0TZENT.54P2IBFQRED22@gmail.com
>> Tested-by: Teodora <teolyub@gmail.com>
>> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
>> ---
>> Documentation/wmi/devices/dell-wmi-pega.rst | 82 ++++++++++++++++++
>> MAINTAINERS | 6 ++
>> drivers/platform/x86/dell/Kconfig | 13 +++
>> drivers/platform/x86/dell/Makefile | 1 +
>> drivers/platform/x86/dell/dell-wmi-pega.c | 93 +++++++++++++++++++++
>> 5 files changed, 195 insertions(+)
>> create mode 100644 Documentation/wmi/devices/dell-wmi-pega.rst
>> create mode 100644 drivers/platform/x86/dell/dell-wmi-pega.c
>>
>> diff --git a/Documentation/wmi/devices/dell-wmi-pega.rst b/Documentation/wmi/devices/dell-wmi-pega.rst
>> new file mode 100644
>> index 000000000000..935c8511594b
>> --- /dev/null
>> +++ b/Documentation/wmi/devices/dell-wmi-pega.rst
>> @@ -0,0 +1,82 @@
>> +.. SPDX-License-Identifier: GPL-2.0-or-later
>> +
>> +===========================================================
>> +Dell All-In-One Series Platform Integration (dell-wmi-pega)
>> +===========================================================
>> +
>> +Introduction
>> +------------
>> +
>> +Many Dell All-In-One devices contain a WMI device for notifying the underlying platform
>> +of various OS-specific events like power up, shutdown and backlight brightness control.
>> +
>> +Not implementing support for this WMI device might prevent hotkeys exposed over WMI from
>> +working on some models.
>> +
>> +WMI interface description
>> +=========================
>> +
>> +The WMI interface description can be decoded from the embedded binary MOF (bmof)
>> +data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility:
>> +
>> +::
>> +
>> + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"),
>> + Description("Class used to operate method - WMBC"),
>> + guid("{2D703EE8-36AC-4F88-BDB5-7556CE6B2946}") : ToInstance]
>> + class AcpiOSD_WMBC_method : WMIMethod {
>> +
>> + [key, read]
>> + string InstanceName;
>> +
>> + [read]
>> + boolean Active;
>> +
>> + [WmiMethodId(1), Implemented, read, write,
>> + Description("Invoked by AP when system up.")]
>> + void PegaOemNotificationStartUp([out, Description("Return Value")] uint32 RetVal);
>> +
>> + [WmiMethodId(2), Implemented, read, write,
>> + Description("Invoked by AP when system is going to off state.")]
>> + void PegaOemNotificationStop([out, Description("Return Value")] uint32 RetVal);
>> +
>> + [WmiMethodId(3), Implemented, read, write,
>> + Description("Invoked by Application to tune up brightness.")]
>> + void PegaOemNotificationBrightnessUP([out, Description("Return Value")] uint32 RetVal);
>> +
>> + [WmiMethodId(4), Implemented, read, write,
>> + Description("Invoked by Application to tune down brightness.")]
>> + void PegaOemNotificationBrightnessDown([out, Description("Return Value")] uint32 RetVal);
>> +
>> + [WmiMethodId(5), Implemented, read, write, Description("Reserved.")]
>> + void PegaOemNotificationRSVD1([out, Description("Return Value")] uint32 RetVal);
>> +
>> + [WmiMethodId(6), Implemented, read, write, Description("Reserved.")]
>> + void PegaOemNotificationRSVD2([out, Description("Return Value")] uint32 RetVal);
>> + };
>> +
>> +The return value of each WMI method should be equal to the WMI method ID.
>> +
>> +WMI method PegaOemNotificationStartUp()
>> +---------------------------------------
>> +
>> +Notifies the platform that the OS is operational. On some models this WMI method also enables
>> +reporting of hotkey events over WMI.
>> +
>> +WMI method PegaOemNotificationStop()
>> +------------------------------------
>> +
>> +Notifies the platform that the OS is shutting down.
>> +
>> +WMI method PegaOemNotificationBrightnessUP()
>> +--------------------------------------------
>> +
>> +Notifies the platform that the user wants to increase the backlight brightness. This WMI method
>> +usually only forwards this request to the acpi-video driver, so the dell-wmi-pega driver does
>> +not use it.
>
> Could these paragraphs be reflowed to 80 chars as long textual lines are
> harder to read (eye movement required).
Sure, will do.
>> +WMI method PegaOemNotificationBrightnessDown()
>> +----------------------------------------------
>> +
>> +Notifies the platform that the user wants to decrease the backlight brightness. See
>> +``PegaOemNotificationBrightnessUP()`` for details.
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index bd31e734669e..fb9a80f96900 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -7534,6 +7534,12 @@ M: Pali Rohár <pali@kernel.org>
>> S: Maintained
>> F: drivers/platform/x86/dell/dell-wmi-base.c
>>
>> +DELL WMI PEGA DRIVER
>> +M: Armin Wolf <W_Armin@gmx.de>
>> +S: Odd Fixes
>> +F: Documentation/wmi/devices/dell-wmi-pega.rst
>> +F: drivers/platform/x86/dell/dell-wmi-pega.c
>> +
>> DELL WMI SYSMAN DRIVER
>> M: Prasanth Ksr <prasanth.ksr@dell.com>
>> L: Dell.Client.Kernel@dell.com
>> diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
>> index 9f0016056d7e..289379383ccb 100644
>> --- a/drivers/platform/x86/dell/Kconfig
>> +++ b/drivers/platform/x86/dell/Kconfig
>> @@ -228,6 +228,7 @@ config DELL_WMI_AIO
>> depends on ACPI_WMI
>> depends on INPUT
>> select INPUT_SPARSEKMAP
>> + imply DELL_WMI_PEGA
>> help
>> Say Y here if you want to support WMI-based hotkeys on Dell
>> All-In-One machines.
>> @@ -262,6 +263,18 @@ config DELL_WMI_LED
>> This adds support for the Latitude 2100 and similar
>> notebooks that have an external LED.
>>
>> +config DELL_WMI_PEGA
>> + tristate "Dell WMI AIO Platform Support"
>> + default m
>> + depends on ACPI_WMI
>> + help
>> + This option adds support for WMI-based platform integration on Dell All-In-One machines.
>> + This driver is necessary for enabling the delivery of hotkey events to the dell-wmi-aio
>> + driver on some machines.
>> +
>> + To compile this drivers as a module, choose M here: the module will be called
>> + dell-wmi-pega.
>> +
>> config DELL_WMI_SYSMAN
>> tristate "Dell WMI-based Systems management driver"
>> default m
>> diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
>> index 470874c6e6e6..46c91c240a2c 100644
>> --- a/drivers/platform/x86/dell/Makefile
>> +++ b/drivers/platform/x86/dell/Makefile
>> @@ -27,5 +27,6 @@ obj-$(CONFIG_DELL_WMI_AIO) += dell-wmi-aio.o
>> obj-$(CONFIG_DELL_WMI_DESCRIPTOR) += dell-wmi-descriptor.o
>> obj-$(CONFIG_DELL_WMI_DDV) += dell-wmi-ddv.o
>> obj-$(CONFIG_DELL_WMI_LED) += dell-wmi-led.o
>> +obj-$(CONFIG_DELL_WMI_PEGA) += dell-wmi-pega.o
>> obj-$(CONFIG_DELL_WMI_SYSMAN) += dell-wmi-sysman/
>> obj-$(CONFIG_DELL_DW5826E_RESET) += dell-dw5826e-reset.o
>> diff --git a/drivers/platform/x86/dell/dell-wmi-pega.c b/drivers/platform/x86/dell/dell-wmi-pega.c
>> new file mode 100644
>> index 000000000000..ddb1b6cc6b1c
>> --- /dev/null
>> +++ b/drivers/platform/x86/dell/dell-wmi-pega.c
>> @@ -0,0 +1,93 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * WMI platform integration for Dell All-In-One series.
>> + *
>> + * Copyright (C) 2026 Armin Wolf <W_Armin@gmx.de>
>> + *
>> + * Based on earlier work by Teodora <teolyub@gmail.com>.
>> + */
>> +
>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +
>> +#include <linux/cleanup.h>
>> +#include <linux/device.h>
>> +#include <linux/device/driver.h>
>> +#include <linux/dev_printk.h>
>> +#include <linux/kernel.h>
>
> What for is this?
>
> I suspect direct device.h include isn't necessary either (and it's
> anyway guaranteed to come through wmi.h).
Good question, i copied it from one of the other WMI drivers.
I will remove both includes in the next revision.
>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/types.h>
>> +#include <linux/wmi.h>
>> +
>> +#define PEGA_GUID "2D703EE8-36AC-4F88-BDB5-7556CE6B2946"
>> +
>> +enum dell_pega_method {
>> + DELL_PEGA_NOTIFICATION_STARTUP = 0x01,
>> + DELL_PEGA_NOTIFICATION_STOP = 0x02,
>> + DELL_PEGA_NOTIFICATION_BRIGHTNESS_UP = 0x03,
>> + DELL_PEGA_NOTIFICATION_BRIGHTNESS_DOWN = 0x04,
>> + DELL_PEGA_NOTIFICATION_RESERVED_1 = 0x05,
>> + DELL_PEGA_NOTIFICATION_RESERVED_2 = 0x06,
>> +};
>> +
>> +static int dell_wmi_pega_invoke(struct wmi_device *wdev, enum dell_pega_method method)
>> +{
>> + struct wmi_buffer input = { };
>> + struct wmi_buffer output;
>> + int ret;
>> +
>> + ret = wmidev_invoke_method(wdev, 0x0, method, &input, &output, sizeof(__le32));
>> + if (ret < 0)
>> + return ret;
>> +
>> + __le32 *result __free(kfree) = output.data;
>> + /* The return value should always be equal to the WMI method ID */
>> + if (le32_to_cpu(*result) != method)
>
> Include for le32_to_cpu()
What would be the correct include for this?
>
>> + return -EIO;
>> +
>> + return 0;
>> +}
>> +
>> +static int dell_wmi_pega_probe(struct wmi_device *wdev, const void *context)
>> +{
>> + int ret;
>> +
>> + ret = dell_wmi_pega_invoke(wdev, DELL_PEGA_NOTIFICATION_STARTUP);
>> + if (ret < 0)
>> + dev_err(&wdev->dev,
>> + "Failed to notify platform of startup, some hotkeys might not work\n");
>
> braces for multiline constructs.
>
>> +
>> + return ret;
>> +}
>> +
>> +static void dell_wmi_pega_shutdown(struct wmi_device *wdev)
>> +{
>> + int ret;
>> +
>> + ret = dell_wmi_pega_invoke(wdev, DELL_PEGA_NOTIFICATION_STOP);
>> + if (ret < 0)
>> + dev_warn(&wdev->dev, "Failed to notify platform of shutdown\n");
>> +}
>> +
>> +static const struct wmi_device_id dell_wmi_pega_id_table[] = {
>> + { PEGA_GUID, NULL },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(wmi, dell_wmi_pega_id_table);
>> +
>> +static struct wmi_driver dell_wmi_pega_driver = {
>> + .driver = {
>> + .name = "dell-wmi-pega",
>> + .probe_type = PROBE_PREFER_ASYNCHRONOUS,
>> + },
>> + .id_table = dell_wmi_pega_id_table,
>> + .probe = dell_wmi_pega_probe,
>> + .remove = dell_wmi_pega_shutdown,
>> + .shutdown = dell_wmi_pega_shutdown,
>> + .no_singleton = true,
>> +};
>> +module_wmi_driver(dell_wmi_pega_driver);
>> +
>> +MODULE_AUTHOR("Armin Wolf <W_Armin@gmx.de>");
>> +MODULE_DESCRIPTION("Dell All-In-One series platform integration");
>> +MODULE_LICENSE("GPL");
>
> Just the mandatory nitpicking :-), seems fine otherwise.
Thanks,
i will wait with sending a v2 until Teodora has tested the second patch.
Thanks,
Armin Wolf
next prev parent reply other threads:[~2026-11-17 22:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 21:45 Armin Wolf
2026-11-17 21:45 ` [PATCH 2/2] platform/x86: dell-wmi-aio: Ignore HDMI Input event Armin Wolf
2026-11-17 21:52 ` Armin Wolf
2026-11-17 22:17 ` [PATCH 1/2] platform/x86: dell: Add new dell-wmi-pega driver Ilpo Järvinen
2026-11-17 22:30 ` Armin Wolf [this message]
2026-11-17 23:09 ` Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=848ebb18-b9bf-4747-9403-fa8da4fba2ad@gmx.de \
--to=w_armin@gmx.de \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=teolyub@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®