Re: [PATCH v2 0/4] i2c: pca-platform: additional improvements

[Chris Packham <Chris.Packham@alliedtelesis.co.nz>]

On 07/12/17 23:42, Wolfram Sang wrote:
> On Sun, Oct 29, 2017 at 06:29:18PM +0100, Wolfram Sang wrote:
>> On Wed, Jul 05, 2017 at 10:13:54PM +1200, Chris Packham wrote:
>>> This series addresses some of the points identified by Andy. The series is
>>> based on top of i2c/for-next. 2 of the patches from v1 have already been
>>> applied so I've dropped them from this version.
>>>
>>> I have compile tested patch 1/1 but I don't have access to sh hardware
>>> to actually test the changes on.
>>>
>>> Chris Packham (4):
>>>    sh: sh7785lcr: add GPIO lookup table for i2c controller reset
>>>    i2c: pca-platform: unconditionally use devm_gpiod_get_optional
>>>    i2c: pca-platform: use device_property_read_u32
>>>    i2c: pca-platform: drop gpio from platform data
>>>
>>>   arch/blackfin/mach-bf561/boards/acvilon.c |  1 -
>>>   arch/sh/boards/board-sh7785lcr.c          | 11 +++++++++-
>>>   drivers/i2c/busses/i2c-pca-platform.c     | 34 +++++++++----------------------
>>>   include/linux/i2c-pca-platform.h          |  3 ---
>>>   4 files changed, 20 insertions(+), 29 deletions(-)
>>
>> Series looks good to me, too. I'd need ACKs from the SH maintainers,
>> though. Technically, from Blackfin maintainers as well. But I haven't
>> heard from them in months, so I could go without that.
> 
> Adding Rich Felker to CC...
> 

Ping. Was there any movement on this series? I think this may have been 
caught up between the holiday period and various merge windows.

Just wanted to check if there was anything I need to be doing to get 
this through.