mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <James.Bottomley@HansenPartnership.com>,
	<martin.petersen@oracle.com>, <andersson@kernel.org>,
	<bvanassche@acm.org>, <ebiggers@kernel.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-scsi@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>,
	Nitin Rawat <quic_nitirawa@quicinc.com>
Subject: Re: [PATCH V10] scsi: ufs: qcom: Enable UFS Shared ICE Feature
Date: Mon, 27 Jan 2025 20:48:01 +0530	[thread overview]
Message-ID: <85769d2e-c1cc-42e3-bbc7-ec878118d2c7@quicinc.com> (raw)
In-Reply-To: <20250117165157.euq56jnbizhgfjtf@thinkpad>



On 17-Jan-25 10:22 PM, Manivannan Sadhasivam wrote:
> On Thu, Jan 09, 2025 at 12:33:52PM +0530, Ram Kumar Dwivedi wrote:
> 
> [...]
> 
>>  static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
>> @@ -439,6 +465,7 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>>  		err = ufs_qcom_check_hibern8(hba);
>>  		ufs_qcom_enable_hw_clk_gating(hba);
>>  		ufs_qcom_ice_enable(host);
>> +		ufs_qcom_config_ice_allocator(host);
> 
> This should be moved before ufs_qcom_ice_enable(), no?

Hi Mani,

This sequence is as per HPG guidelines.

Thanks,
Ram.

> 
>>  		break;
>>  	default:
>>  		dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
>> @@ -932,6 +959,14 @@ static void ufs_qcom_set_host_params(struct ufs_hba *hba)
>>  	host_params->hs_tx_gear = host_params->hs_rx_gear = ufs_qcom_get_hs_gear(hba);
>>  }
>>  
>> +static void ufs_qcom_set_host_caps(struct ufs_hba *hba)
>> +{
>> +	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> +
>> +	if (host->hw_ver.major >= 0x5)
>> +		host->caps |= UFS_QCOM_CAP_ICE_CONFIG;
>> +}
>> +
>>  static void ufs_qcom_set_caps(struct ufs_hba *hba)
>>  {
>>  	hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
>> @@ -940,6 +975,8 @@ static void ufs_qcom_set_caps(struct ufs_hba *hba)
>>  	hba->caps |= UFSHCD_CAP_WB_EN;
>>  	hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE;
>>  	hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND;
>> +
>> +	ufs_qcom_set_host_caps(hba);
>>  }
>>  
>>  /**
>> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
>> index b9de170983c9..2975a9e545fa 100644
>> --- a/drivers/ufs/host/ufs-qcom.h
>> +++ b/drivers/ufs/host/ufs-qcom.h
>> @@ -76,6 +76,12 @@ enum {
>>  	UFS_MEM_CQIS_VS		= 0x8,
>>  };
>>  
>> +/* QCOM UFS host controller Shared ICE registers */
>> +enum {
>> +	REG_UFS_MEM_ICE_CONFIG			= 0x260C,
>> +	REG_UFS_MEM_ICE_NUM_CORE		= 0x2664,
>> +};
>> +
> 
> No, I asked for this change:
> 
> ```
> diff --git a/drivers/ufs/host/ufs-qcom.h b/drivers/ufs/host/ufs-qcom.h
> index b9de170983c9..9d1c9da51688 100644
> --- a/drivers/ufs/host/ufs-qcom.h
> +++ b/drivers/ufs/host/ufs-qcom.h
> @@ -50,6 +50,9 @@ enum {
>          */
>         UFS_AH8_CFG                             = 0xFC,
>  
> +       REG_UFS_MEM_ICE_CONFIG                  = 0x260C,
> +       REG_UFS_MEM_ICE_NUM_CORE                = 0x2664,
> +
>         REG_UFS_CFG3                            = 0x271C,
>  
>         REG_UFS_DEBUG_SPARE_CFG                 = 0x284C,
> ```
> 
>>  #define UFS_CNTLR_2_x_x_VEN_REGS_OFFSET(x)	(0x000 + x)
>>  #define UFS_CNTLR_3_x_x_VEN_REGS_OFFSET(x)	(0x400 + x)
>>  
>> @@ -110,6 +116,9 @@ enum {
>>  /* bit definition for UFS_UFS_TEST_BUS_CTRL_n */
>>  #define TEST_BUS_SUB_SEL_MASK	GENMASK(4, 0)  /* All XXX_SEL fields are 5 bits wide */
>>  
>> +/* bit definition for UFS Shared ICE config */
> 
> 'bit definition for REG_UFS_MEM_ICE_CONFIG register'

Hi Mani,

I have addressed this in the latest patchset.

Thanks,
Ram.

> 
> - Mani
> 


      reply	other threads:[~2025-01-27 15:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-09  7:03 Ram Kumar Dwivedi
2025-01-17 16:52 ` Manivannan Sadhasivam
2025-01-27 15:18   ` Ram Kumar Dwivedi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=85769d2e-c1cc-42e3-bbc7-ec878118d2c7@quicinc.com \
    --to=quic_rdwivedi@quicinc.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=andersson@kernel.org \
    --cc=bvanassche@acm.org \
    --cc=ebiggers@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=martin.petersen@oracle.com \
    --cc=quic_narepall@quicinc.com \
    --cc=quic_nitirawa@quicinc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®