mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Astrid Rost <astridr@axis.com>
To: "Amadeusz Sławiński" <amadeuszx.slawinski@linux.intel.com>,
	"Astrid Rost" <astrid.rost@axis.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Liam Girdwood" <lgirdwood@gmail.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Takashi Iwai" <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <kernel@axis.com>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v1 2/4] ASoC: simple-card-utils: create jack inputs for aux_devs
Date: Wed, 18 Jan 2023 15:04:47 +0100	[thread overview]
Message-ID: <858c2dc7-e439-b3b7-f768-8974c3e1b15b@axis.com> (raw)
In-Reply-To: <e08f5a83-5a7e-9095-92f2-d78601c7a0bd@linux.intel.com>



On 1/18/23 14:39, Amadeusz Sławiński wrote:
> On 1/18/2023 1:52 PM, Astrid Rost wrote:
>> Add a generic way to create jack inputs for auxiliary jack detection
>> drivers (e.g. via i2c, spi), which are not part of any real codec.
>> The simple-card can be used as combining card driver to add the jacks,
>> no new one is required.
>>
>> Create a jack (for input-events) for jack devices in the auxiliary
>> device list (aux_devs). A device which has the functions set_jack and
>> get_jack_supported_type counts as jack device.
>>
>> Add a devicetree entry, in case not all input types are required.
>>   simple-card,aux-jack-types:
>> Array of snd_jack_type to create jack-input-event for jack devices in
>> aux-devs. If the setting is 0, the supported type of the device is used.
>>
>> Signed-off-by: Astrid Rost <astrid.rost@axis.com>
>> ---
>>   include/sound/simple_card_utils.h     |  3 ++
>>   sound/soc/generic/simple-card-utils.c | 63 +++++++++++++++++++++++++++
>>   sound/soc/generic/simple-card.c       |  4 ++
>>   3 files changed, 70 insertions(+)
>>
>> diff --git a/include/sound/simple_card_utils.h 
>> b/include/sound/simple_card_utils.h
>> index 38590f1ae9ee..a3f3f3aa9e6e 100644
>> --- a/include/sound/simple_card_utils.h
>> +++ b/include/sound/simple_card_utils.h
>> @@ -69,6 +69,7 @@ struct asoc_simple_priv {
>>       } *dai_props;
>>       struct asoc_simple_jack hp_jack;
>>       struct asoc_simple_jack mic_jack;
>> +    struct snd_soc_jack *aux_jacks;
>>       struct snd_soc_dai_link *dai_link;
>>       struct asoc_simple_dai *dais;
>>       struct snd_soc_dai_link_component *dlcs;
>> @@ -187,6 +188,8 @@ int asoc_simple_parse_pin_switches(struct 
>> snd_soc_card *card,
>>   int asoc_simple_init_jack(struct snd_soc_card *card,
>>                      struct asoc_simple_jack *sjack,
>>                      int is_hp, char *prefix, char *pin);
>> +int asoc_simple_init_aux_jacks(struct asoc_simple_priv *priv,
>> +                char *prefix);
>>   int asoc_simple_init_priv(struct asoc_simple_priv *priv,
>>                      struct link_info *li);
>>   int asoc_simple_remove(struct platform_device *pdev);
>> diff --git a/sound/soc/generic/simple-card-utils.c 
>> b/sound/soc/generic/simple-card-utils.c
>> index e35becce9635..668123549fbf 100644
>> --- a/sound/soc/generic/simple-card-utils.c
>> +++ b/sound/soc/generic/simple-card-utils.c
>> @@ -786,6 +786,69 @@ int asoc_simple_init_jack(struct snd_soc_card *card,
>>   }
>>   EXPORT_SYMBOL_GPL(asoc_simple_init_jack);
>> +int asoc_simple_init_aux_jacks(struct asoc_simple_priv *priv, char 
>> *prefix)
>> +{
>> +    struct snd_soc_card *card = simple_priv_to_card(priv);
>> +    struct device *dev = card->dev;
>> +    struct snd_soc_component *component;
>> +    char prop[128];
>> +    int found_jack_index = 0;
>> +    int num = 0;
>> +    int ret;
>> +
>> +    if (priv->aux_jacks)
>> +        return 0;
>> +
>> +    snprintf(prop, sizeof(prop), "%saux-jack-types", prefix);
>> +    num = of_property_count_u32_elems(dev->of_node, prop);
>> +    if (num < 1)
>> +        return 0;
>> +
>> +    priv->aux_jacks = devm_kcalloc(card->dev, num,
>> +                       sizeof(struct snd_soc_jack), GFP_KERNEL);
>> +    if (!priv->aux_jacks)
>> +        return -ENOMEM;
>> +
>> +    for_each_card_auxs(card, component) {
>> +        if (found_jack_index >= num)
>> +            break;
>> +
>> +        if (component->driver->set_jack &&
>> +            component->driver->get_jack_supported_type) {
> 
> This check is really weird, you are checking if callbacks exist at all, 
> which should be unnecessary as it duplicates the work oh 
> snd_soc_component_ functions. I would just try to call 
> snd_soc_component_get_jack_supported_type() directly and if it returns 
> -ENOTSUPP, just go to next iteration.
> I guess your main problem is snd_soc_component_set_jack(), but you can 
> just call it with NULL jack to check if it returns -ENOTSUPP, but I 
> guess the overall asumption would be that if someone implements 
> .get_jack_supported_type, they also implemented .set_jack, so maybe it 
> is just unnecessary?
> 

Thank you!
Yes, it works fine without it. I will remove it.

>> +            char id[128];
>> +            int type = 0;
>> +            struct snd_soc_jack *jack =
>> +                &(priv->aux_jacks[found_jack_index]);
>> +            int type_supp_mask =
>> +                snd_soc_component_get_jack_supported_type(
>> +                    component);
>> +
>> +            ret = of_property_read_u32_index(
>> +                dev->of_node, prop, found_jack_index++, &type);
>> +            if (ret)
>> +                continue;
>> +
>> +            if (type)
>> +                type &= type_supp_mask; /* use only supported types */
>> +            else
>> +                type = type_supp_mask; /* use all supported types */
>> +
>> +            if (!type)
>> +                continue;
>> +
>> +            /* create jack */
>> +            snprintf(id, sizeof(id), "%s-jack", component->name);
>> +            ret = snd_soc_card_jack_new(card, id, type, jack);
>> +            if (ret)
>> +                continue;
>> +
>> +            (void)snd_soc_component_set_jack(component, jack, NULL);
>> +        }
>> +    }
>> +    return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(asoc_simple_init_aux_jacks);
>> +
>>   int asoc_simple_init_priv(struct asoc_simple_priv *priv,
>>                 struct link_info *li)
>>   {
>> diff --git a/sound/soc/generic/simple-card.c 
>> b/sound/soc/generic/simple-card.c
>> index feb55b66239b..e98932c16754 100644
>> --- a/sound/soc/generic/simple-card.c
>> +++ b/sound/soc/generic/simple-card.c
>> @@ -623,6 +623,10 @@ static int simple_soc_probe(struct snd_soc_card 
>> *card)
>>       if (ret < 0)
>>           return ret;
>> +    ret = asoc_simple_init_aux_jacks(priv, PREFIX);
>> +    if (ret < 0)
>> +        return ret;
>> +
>>       return 0;
>>   }
> 

  reply	other threads:[~2023-01-18 14:22 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-18 12:52 [PATCH v1 0/4] ASoC: simple-card-utils: jack " Astrid Rost
2023-01-18 12:52 ` [PATCH v1 1/4] ASoC: soc-component: add get_jack_supported_type Astrid Rost
2023-01-18 12:52 ` [PATCH v1 2/4] ASoC: simple-card-utils: create jack inputs for aux_devs Astrid Rost
2023-01-18 13:39   ` Amadeusz Sławiński
2023-01-18 14:04     ` Astrid Rost [this message]
2023-01-18 12:52 ` [PATCH v1 3/4] ASoC: ts3a227e: add set_jack and get_jack_supported_type Astrid Rost
2023-01-18 13:49   ` Amadeusz Sławiński
2023-01-18 12:52 ` [PATCH v1 4/4] ASoC: dt-bindings: simple-card: create jack for aux_devs Astrid Rost
2023-01-19 11:18   ` Krzysztof Kozlowski
2023-01-19 16:00     ` Astrid Rost
2023-01-19 16:17   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=858c2dc7-e439-b3b7-f768-8974c3e1b15b@axis.com \
    --to=astridr@axis.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=amadeuszx.slawinski@linux.intel.com \
    --cc=astrid.rost@axis.com \
    --cc=broonie@kernel.org \
    --cc=kernel@axis.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®