mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gautam Dawar <gdawar@amd.com>
To: Jason Wang <jasowang@redhat.com>, Gautam Dawar <gautam.dawar@amd.com>
Cc: linux-net-drivers@amd.com, Edward Cree <ecree.xilinx@gmail.com>,
	Martin Habets <habetsm.xilinx@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Richard Cochran <richardcochran@gmail.com>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	eperezma@redhat.com, harpreet.anand@amd.com, tanuj.kamde@amd.com,
	koushik.dutta@amd.com
Subject: Re: [PATCH net-next v2 04/14] sfc: evaluate vdpa support based on FW capability CLIENT_CMD_VF_PROXY
Date: Mon, 13 Mar 2023 18:09:19 +0530	[thread overview]
Message-ID: <85ad74df-147b-8d27-dd39-cc9d828ada4b@amd.com> (raw)
In-Reply-To: <CACGkMEvUhC3HfizpiM8zxMa2RwgkR=yLm-GDpY120_32aBmWFw@mail.gmail.com>


On 3/10/23 10:34, Jason Wang wrote:
> Caution: This message originated from an External Source. Use proper caution when opening attachments, clicking links, or responding.
>
>
> On Tue, Mar 7, 2023 at 7:37 PM Gautam Dawar <gautam.dawar@amd.com> wrote:
>> Add and update vdpa_supported field to struct efx_nic to true if
>> running Firmware supports CLIENT_CMD_VF_PROXY capability. This is
>> required to ensure DMA isolation between MCDI command buffer and guest
>> buffers.
>>
>> Signed-off-by: Gautam Dawar <gautam.dawar@amd.com>
>> ---
>>   drivers/net/ethernet/sfc/ef100_netdev.c | 26 +++++++++++++++---
>>   drivers/net/ethernet/sfc/ef100_nic.c    | 35 +++++++++----------------
>>   drivers/net/ethernet/sfc/ef100_nic.h    |  6 +++--
>>   drivers/net/ethernet/sfc/ef100_vdpa.h   |  5 ++--
>>   4 files changed, 41 insertions(+), 31 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/sfc/ef100_netdev.c b/drivers/net/ethernet/sfc/ef100_netdev.c
>> index d916877b5a9a..5d93e870d9b7 100644
>> --- a/drivers/net/ethernet/sfc/ef100_netdev.c
>> +++ b/drivers/net/ethernet/sfc/ef100_netdev.c
>> @@ -355,6 +355,28 @@ void ef100_remove_netdev(struct efx_probe_data *probe_data)
>>          efx->state = STATE_PROBED;
>>   }
>>
>> +static void efx_ef100_update_tso_features(struct efx_nic *efx)
>> +{
>> +       struct ef100_nic_data *nic_data = efx->nic_data;
>> +       struct net_device *net_dev = efx->net_dev;
>> +       netdev_features_t tso;
>> +
>> +       if (!efx_ef100_has_cap(nic_data->datapath_caps2, TX_TSO_V3))
>> +               return;
>> +
>> +       tso = NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_PARTIAL |
>> +             NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM |
>> +             NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM;
>> +
>> +       net_dev->features |= tso;
>> +       net_dev->hw_features |= tso;
>> +       net_dev->hw_enc_features |= tso;
>> +       /* EF100 HW can only offload outer checksums if they are UDP,
>> +        * so for GRE_CSUM we have to use GSO_PARTIAL.
>> +        */
>> +       net_dev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
>> +}
> I don't see a direct relationship between vDPA and the TSO capability.
> Is this an independent fix?
This isn't actually fixing any issue. This a minor code refactoring that 
wraps-up updating of the TSO capabilities in a separate function for 
better readability.
>
>> +
>>   int ef100_probe_netdev(struct efx_probe_data *probe_data)
>>   {
>>          struct efx_nic *efx = &probe_data->efx;
>> @@ -387,9 +409,7 @@ int ef100_probe_netdev(struct efx_probe_data *probe_data)
>>                                 ESE_EF100_DP_GZ_TSO_MAX_HDR_NUM_SEGS_DEFAULT);
>>          efx->mdio.dev = net_dev;
>>
>> -       rc = efx_ef100_init_datapath_caps(efx);
>> -       if (rc < 0)
>> -               goto fail;
>> +       efx_ef100_update_tso_features(efx);
>>
>>          rc = ef100_phy_probe(efx);
>>          if (rc)
>> diff --git a/drivers/net/ethernet/sfc/ef100_nic.c b/drivers/net/ethernet/sfc/ef100_nic.c
>> index 8cbe5e0f4bdf..ef6e295efcf7 100644
>> --- a/drivers/net/ethernet/sfc/ef100_nic.c
>> +++ b/drivers/net/ethernet/sfc/ef100_nic.c
>> @@ -161,7 +161,7 @@ int ef100_get_mac_address(struct efx_nic *efx, u8 *mac_address,
>>          return 0;
>>   }
>>
>> -int efx_ef100_init_datapath_caps(struct efx_nic *efx)
>> +static int efx_ef100_init_datapath_caps(struct efx_nic *efx)
>>   {
>>          MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_CAPABILITIES_V7_OUT_LEN);
>>          struct ef100_nic_data *nic_data = efx->nic_data;
>> @@ -197,25 +197,15 @@ int efx_ef100_init_datapath_caps(struct efx_nic *efx)
>>          if (rc)
>>                  return rc;
>>
>> -       if (efx_ef100_has_cap(nic_data->datapath_caps2, TX_TSO_V3)) {
>> -               struct net_device *net_dev = efx->net_dev;
>> -               netdev_features_t tso = NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GSO_PARTIAL |
>> -                                       NETIF_F_GSO_UDP_TUNNEL | NETIF_F_GSO_UDP_TUNNEL_CSUM |
>> -                                       NETIF_F_GSO_GRE | NETIF_F_GSO_GRE_CSUM;
>> -
>> -               net_dev->features |= tso;
>> -               net_dev->hw_features |= tso;
>> -               net_dev->hw_enc_features |= tso;
>> -               /* EF100 HW can only offload outer checksums if they are UDP,
>> -                * so for GRE_CSUM we have to use GSO_PARTIAL.
>> -                */
>> -               net_dev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM;
>> -       }
>>          efx->num_mac_stats = MCDI_WORD(outbuf,
>>                                         GET_CAPABILITIES_V4_OUT_MAC_STATS_NUM_STATS);
>>          netif_dbg(efx, probe, efx->net_dev,
>>                    "firmware reports num_mac_stats = %u\n",
>>                    efx->num_mac_stats);
>> +
>> +       nic_data->vdpa_supported = efx_ef100_has_cap(nic_data->datapath_caps3,
>> +                                                    CLIENT_CMD_VF_PROXY) &&
>> +                                  efx->type->is_vf;
>>          return 0;
>>   }
>>
>> @@ -806,13 +796,6 @@ static char *bar_config_name[] = {
>>          [EF100_BAR_CONFIG_VDPA] = "vDPA",
>>   };
>>
>> -#ifdef CONFIG_SFC_VDPA
>> -static bool efx_vdpa_supported(struct efx_nic *efx)
>> -{
>> -       return efx->type->is_vf;
>> -}
>> -#endif
>> -
>>   int efx_ef100_set_bar_config(struct efx_nic *efx,
>>                               enum ef100_bar_config new_config)
>>   {
>> @@ -828,7 +811,7 @@ int efx_ef100_set_bar_config(struct efx_nic *efx,
>>
>>   #ifdef CONFIG_SFC_VDPA
>>          /* Current EF100 hardware supports vDPA on VFs only */
>> -       if (new_config == EF100_BAR_CONFIG_VDPA && !efx_vdpa_supported(efx)) {
>> +       if (new_config == EF100_BAR_CONFIG_VDPA && !nic_data->vdpa_supported) {
>>                  pci_err(efx->pci_dev, "vdpa over PF not supported : %s",
>>                          efx->name);
>>                  return -EOPNOTSUPP;
>> @@ -1208,6 +1191,12 @@ static int ef100_probe_main(struct efx_nic *efx)
>>                  goto fail;
>>          }
>>
>> +       rc = efx_ef100_init_datapath_caps(efx);
>> +       if (rc) {
>> +               pci_info(efx->pci_dev, "Unable to initialize datapath caps\n");
>> +               goto fail;
>> +       }
>> +
>>          return 0;
>>   fail:
>>          return rc;
>> diff --git a/drivers/net/ethernet/sfc/ef100_nic.h b/drivers/net/ethernet/sfc/ef100_nic.h
>> index 4562982f2965..117a73d0795c 100644
>> --- a/drivers/net/ethernet/sfc/ef100_nic.h
>> +++ b/drivers/net/ethernet/sfc/ef100_nic.h
>> @@ -76,6 +76,9 @@ struct ef100_nic_data {
>>          u32 datapath_caps3;
>>          unsigned int pf_index;
>>          u16 warm_boot_count;
>> +#ifdef CONFIG_SFC_VDPA
>> +       bool vdpa_supported; /* true if vdpa is supported on this PCIe FN */
>> +#endif
>>          u8 port_id[ETH_ALEN];
>>          DECLARE_BITMAP(evq_phases, EFX_MAX_CHANNELS);
>>          enum ef100_bar_config bar_config;
>> @@ -95,9 +98,8 @@ struct ef100_nic_data {
>>   };
>>
>>   #define efx_ef100_has_cap(caps, flag) \
>> -       (!!((caps) & BIT_ULL(MC_CMD_GET_CAPABILITIES_V4_OUT_ ## flag ## _LBN)))
>> +       (!!((caps) & BIT_ULL(MC_CMD_GET_CAPABILITIES_V7_OUT_ ## flag ## _LBN)))
>>
>> -int efx_ef100_init_datapath_caps(struct efx_nic *efx);
>>   int ef100_phy_probe(struct efx_nic *efx);
>>   int ef100_filter_table_probe(struct efx_nic *efx);
>>
>> diff --git a/drivers/net/ethernet/sfc/ef100_vdpa.h b/drivers/net/ethernet/sfc/ef100_vdpa.h
>> index f6564448d0c7..90062fd8a25d 100644
>> --- a/drivers/net/ethernet/sfc/ef100_vdpa.h
>> +++ b/drivers/net/ethernet/sfc/ef100_vdpa.h
>> @@ -1,7 +1,6 @@
>>   /* SPDX-License-Identifier: GPL-2.0 */
>> -/* Driver for Xilinx network controllers and boards
>> - * Copyright (C) 2020-2022, Xilinx, Inc.
>> - * Copyright (C) 2022, Advanced Micro Devices, Inc.
>> +/* Driver for AMD network controllers and boards
>> + * Copyright (C) 2023, Advanced Micro Devices, Inc.
> Let's fix this in the patch that introduces this.

Sure, will fix.

Thanks

>
> Thanks
>
>
>
>>    *
>>    * This program is free software; you can redistribute it and/or modify it
>>    * under the terms of the GNU General Public License version 2 as published
>> --
>> 2.30.1
>>

  reply	other threads:[~2023-03-13 12:39 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-07 11:36 [PATCH net-next v2 00/14] sfc: add vDPA support for EF100 devices Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 01/14] sfc: add function personality " Gautam Dawar
2023-03-10  5:04   ` Jason Wang
2023-03-13 11:50     ` Martin Habets
2023-03-15  5:11       ` Jason Wang
2023-03-16  9:06         ` Martin Habets
2023-03-17  3:52           ` Jason Wang
2023-03-21 12:17             ` Martin Habets
2023-03-07 11:36 ` [PATCH net-next v2 02/14] sfc: implement MCDI interface for vDPA operations Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 03/14] sfc: update MCDI headers for CLIENT_CMD_VF_PROXY capability bit Gautam Dawar
     [not found]   ` <9a8c3a7d-7815-3099-e75e-930568dccb35@amd.com>
2023-03-08 16:15     ` Martin Habets
2023-03-13 14:38       ` Gautam Dawar
2023-03-14  8:32         ` Martin Habets
2023-03-07 11:36 ` [PATCH net-next v2 04/14] sfc: evaluate vdpa support based on FW capability CLIENT_CMD_VF_PROXY Gautam Dawar
2023-03-10  5:04   ` Jason Wang
2023-03-13 12:39     ` Gautam Dawar [this message]
2023-03-14  8:38       ` Martin Habets
2023-03-17 11:18         ` Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 05/14] sfc: implement init and fini functions for vDPA personality Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 06/14] sfc: implement vDPA management device operations Gautam Dawar
2023-03-08 16:41   ` Martin Habets
2023-03-13 15:09     ` Gautam Dawar
     [not found]   ` <e773fcb5-985d-071f-25dd-1aaacd393922@amd.com>
2023-03-08 16:48     ` Martin Habets
2023-03-07 11:36 ` [PATCH net-next v2 07/14] sfc: implement vdpa device config operations Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 08/14] sfc: implement vdpa vring " Gautam Dawar
2023-03-08 17:06   ` Martin Habets
2023-03-13 17:03     ` Gautam Dawar
2023-03-10  5:04   ` Jason Wang
2023-03-13 12:33     ` Gautam Dawar
2023-03-15  5:08       ` Jason Wang
2023-03-15 17:06         ` Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 09/14] sfc: implement device status related vdpa " Gautam Dawar
2023-03-10  5:05   ` Jason Wang
2023-03-13 12:10     ` Gautam Dawar
2023-03-15  5:00       ` Jason Wang
2023-03-15 17:18         ` Gautam Dawar
2023-03-17 11:01           ` Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 10/14] sfc: implement filters for receiving traffic Gautam Dawar
2023-03-10  5:05   ` Jason Wang
2023-03-13  9:19     ` Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 11/14] sfc: use PF's IOMMU domain for running VF's MCDI commands Gautam Dawar
2023-03-08 18:01   ` Martin Habets
2023-03-13 17:19     ` Gautam Dawar
2023-03-14  8:48       ` Martin Habets
2023-03-10  5:05   ` Jason Wang
2023-03-13  7:35     ` Gautam Dawar
2023-03-07 11:36 ` [PATCH net-next v2 12/14] sfc: unmap VF's MCDI buffer when switching to vDPA mode Gautam Dawar
2023-03-10  5:05   ` Jason Wang
2023-03-13  7:09     ` Gautam Dawar
2023-03-15  4:54       ` Jason Wang
2023-03-07 11:36 ` [PATCH net-next v2 13/14] sfc: update vdpa device MAC address Gautam Dawar
2023-03-10  5:05   ` Jason Wang
2023-03-13  6:37     ` Gautam Dawar
2023-03-15  4:50       ` Jason Wang
2023-03-07 11:36 ` [PATCH net-next v2 14/14] sfc: register the vDPA device Gautam Dawar
2023-03-10  5:09 ` [PATCH net-next v2 00/14] sfc: add vDPA support for EF100 devices Jason Wang
2023-03-13  6:26   ` Gautam Dawar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=85ad74df-147b-8d27-dd39-cc9d828ada4b@amd.com \
    --to=gdawar@amd.com \
    --cc=davem@davemloft.net \
    --cc=ecree.xilinx@gmail.com \
    --cc=edumazet@google.com \
    --cc=eperezma@redhat.com \
    --cc=gautam.dawar@amd.com \
    --cc=habetsm.xilinx@gmail.com \
    --cc=harpreet.anand@amd.com \
    --cc=jasowang@redhat.com \
    --cc=koushik.dutta@amd.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-net-drivers@amd.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    --cc=tanuj.kamde@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome