Re: [RESEND PATCH v3 1/4] dt-bindings: connector: add power-opmode optional property to usb-connector

[Amelie DELAUNAY <amelie.delaunay@st.com>]

On 10/29/20 4:40 PM, Rob Herring wrote:
> On Thu, Oct 29, 2020 at 10:58:03AM +0100, Amelie Delaunay wrote:
>> Power operation mode may depends on hardware design, so, add the optional
>> property power-opmode for usb-c connector to select the power operation
>> mode capability.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
>> ---
>>   .../bindings/connector/usb-connector.yaml      | 18 ++++++++++++++++++
>>   1 file changed, 18 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
>> index 728f82db073d..200d19c60fd5 100644
>> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
>> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
>> @@ -93,6 +93,24 @@ properties:
>>         - device
>>         - dual
>>   
>> +  power-opmode:
> 
> I've acked this version:
> 
> https://lore.kernel.org/r/20201020093627.256885-2-badhri@google.com
>

frs is used for Fast Role Swap defined in USB PD spec.
I understand it allows to get the same information but I'm wondering why 
the property name is limited to -frs- in this case. What about a 
non-power delivery USB-C connector ?

Moreover, power-opmode property support is already merged in typec class:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/typec/class.c?h=v5.10-rc1&id=12f3467b0d28369d3add7a0deb65fdac9b503c90
and stusb160x driver uses it :(

So, do I need to modify stusb160x driver (and bindings) to take into 
account this USB PD specific property?

Regards,
Amelie

> Please ack it if you are okay with it.
> 
> Rob
> 
> 
>> +    description: Determines the power operation mode that the Type C connector
>> +      will support and will advertise through CC pins when it has no power
>> +      delivery support.
>> +      - "default" corresponds to default USB voltage and current defined by the
>> +        USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
>> +        5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
>> +        operation respectively.
>> +      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
>> +        Type-C Cable and Connector specification, when Power Delivery is not
>> +        supported.
>> +    allOf:
>> +      - $ref: /schemas/types.yaml#definitions/string
>> +    enum:
>> +      - default
>> +      - 1.5A
>> +      - 3.0A
>> +
>>     # The following are optional properties for "usb-c-connector" with power
>>     # delivery support.
>>     source-pdos:
>> -- 
>> 2.17.1
>>