Re: [PATCH v2] net: hsr: Provide RedBox support

[Wojciech Drewek <wojciech.drewek@intel.com>]

On 07.03.2024 12:33, Lukasz Majewski wrote:
> Introduce RedBox support (HSR-SAN to be more precise) for HSR networks.
> The 'Mode U' has been implemented without optimizations for traffic
> reduction - i.e. only sending HSR supervisory frames to Port C and not
> forwarding to HSR ring frames addressed to Port C.
> 
> The corresponding patch to modify iptable2 sources has already been sent:
> https://lore.kernel.org/netdev/20240226124110.37892211@hermes.local/T/
> 
> Testing procedure:
> ------------------
> The EVB-KSZ9477 has been used for testing on net-next branch
> (SHA1: 709776ea8562).
> 
> Ports 4/5 were used for SW managed HSR (hsr1) as first hsr0 for ports 1/2
> (with HW offloading for ksz9477) was created. Port 3 has been used as
> interlink port (single USB-ETH dongle).
> 
> Configuration - RedBox (EVB-KSZ9477):
> ifconfig lan1 down;ifconfig lan2 down
> ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
> ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 interlink lan3 supervision 45 version 1
> ifconfig lan4 up;ifconfig lan5 up
> ifconfig lan3 up
> ifconfig hsr1 192.168.0.11 up
> 
> Configuration - DAN-H (EVB-KSZ9477):
> 
> ifconfig lan1 down;ifconfig lan2 down
> ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1
> ip link add name hsr1 type hsr slave1 lan4 slave2 lan5 supervision 45 version 1
> ifconfig lan4 up;ifconfig lan5 up
> ifconfig hsr1 192.168.0.12 up
> 
> This approach uses only SW based HSR devices (hsr1).
> 
> --------------          -----------------       ------------
> DAN-H  Port5 | <------> | Port5         |       |
>        Port4 | <------> | Port4   Port3 | <---> | PC
>              |          | (RedBox)      |       | (USB-ETH)
> EVB-KSZ9477  |          | EVB-KSZ9477   |       |
> --------------          -----------------       ------------
> 
> Signed-off-by: Lukasz Majewski <lukma@denx.de>

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>

> 
> ---
> Changes for v2:
> 
> - Add deleting of HSR_PT_INTERLINK node to hsr_del_ports()
> - Rewrite handle_std_frame() to awoid code duplication
> - Fix reverse christmas tree in hsr_prune_proxy_nodes() as well as
>   remove stale node indication as interlink doesn't need this detection
>   (only check if node is inactive for more than HSR_PROXY_NODE_FORGET_TIME
>   is required)
> - Rewrite commit message
> ---
>  include/uapi/linux/if_link.h |  1 +
>  net/hsr/hsr_device.c         | 36 ++++++++++++++++++++--
>  net/hsr/hsr_device.h         |  4 +--
>  net/hsr/hsr_forward.c        | 58 ++++++++++++++++++++++++++++++------
>  net/hsr/hsr_framereg.c       | 52 ++++++++++++++++++++++++++++++++
>  net/hsr/hsr_framereg.h       |  6 ++++
>  net/hsr/hsr_main.h           |  7 +++++
>  net/hsr/hsr_netlink.c        | 29 ++++++++++++++++--
>  net/hsr/hsr_slave.c          |  1 +
>  9 files changed, 178 insertions(+), 16 deletions(-)
> 

<...>