mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Qiang Zhao <qiang.zhao@nxp.com>
Cc: "tglx@linutronix.de" <tglx@linutronix.de>,
	"jason@lakedaemon.net" <jason@lakedaemon.net>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [patch v14 3/4] irqchip/qeic: merge qeic_of_init into qe_ic_init
Date: Mon, 25 Mar 2019 09:24:06 +0000	[thread overview]
Message-ID: <864l7rs3wp.wl-marc.zyngier@arm.com> (raw)
In-Reply-To: <20190325035418.19065-4-qiang.zhao@nxp.com>

On Mon, 25 Mar 2019 03:53:41 +0000,
Qiang Zhao <qiang.zhao@nxp.com> wrote:
> 
> qeic_of_init just get device_node of qeic from dtb and call qe_ic_init,
> pass the device_node to qe_ic_init.
> So merge qeic_of_init into qe_ic_init to get the qeic node in
> qe_ic_init.
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
>  drivers/irqchip/irq-qeic.c |  110 ++++++++++++--------------------------------
>  include/soc/fsl/qe/qe_ic.h |    7 ---
>  2 files changed, 30 insertions(+), 87 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
> index 673afb4..a6ccbfb 100644
> --- a/drivers/irqchip/irq-qeic.c
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -407,27 +407,30 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
>  	return irq_linear_revmap(qe_ic->irqhost, irq);
>  }
>  
> -void __init qe_ic_init(struct device_node *node, unsigned int flags,
> -		       void (*low_handler)(struct irq_desc *desc),
> -		       void (*high_handler)(struct irq_desc *desc))
> +static int __init qe_ic_init(struct device_node *node,
> +			     struct device_node *parent)
>  {
>  	struct qe_ic *qe_ic;
>  	struct resource res;
> -	u32 temp = 0, ret, high_active = 0;
> +	int ret = 0;
>  
>  	ret = of_address_to_resource(node, 0, &res);
> -	if (ret)
> -		return;
> +	if (ret) {
> +		ret = -ENODEV;
> +		goto err_put_node;
> +	}
>  
>  	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
> -	if (qe_ic == NULL)
> -		return;
> +	if (qe_ic == NULL) {
> +		ret = -ENOMEM;
> +		goto err_put_node;
> +	}
>  
>  	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
>  					       &qe_ic_host_ops, qe_ic);
>  	if (qe_ic->irqhost == NULL) {
> -		kfree(qe_ic);
> -		return;
> +		ret = -ENOMEM;
> +		goto err_free_qe_ic;
>  	}
>  
>  	qe_ic->regs = ioremap(res.start, resource_size(&res));
> @@ -438,42 +441,30 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
>  	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
>  
>  	if (qe_ic->virq_low == NO_IRQ) {
> -		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
> -		kfree(qe_ic);
> -		return;
> -	}
> -
> -	/* default priority scheme is grouped. If spread mode is    */
> -	/* required, configure cicr accordingly.                    */
> -	if (flags & QE_IC_SPREADMODE_GRP_W)
> -		temp |= CICR_GWCC;
> -	if (flags & QE_IC_SPREADMODE_GRP_X)
> -		temp |= CICR_GXCC;
> -	if (flags & QE_IC_SPREADMODE_GRP_Y)
> -		temp |= CICR_GYCC;
> -	if (flags & QE_IC_SPREADMODE_GRP_Z)
> -		temp |= CICR_GZCC;
> -	if (flags & QE_IC_SPREADMODE_GRP_RISCA)
> -		temp |= CICR_GRTA;
> -	if (flags & QE_IC_SPREADMODE_GRP_RISCB)
> -		temp |= CICR_GRTB;
> -
> -	/* choose destination signal for highest priority interrupt */
> -	if (flags & QE_IC_HIGH_SIGNAL) {
> -		temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT);
> -		high_active = 1;
> +		pr_err("Failed to map QE_IC low IRQ\n");
> +		ret = -ENOMEM;
> +		goto err_domain_remove;

None of this change is documented in the commit log. Why? How can you
afford to get rid of it without breaking anything?

>  	}
>  
> -	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
> -
>  	irq_set_handler_data(qe_ic->virq_low, qe_ic);
> -	irq_set_chained_handler(qe_ic->virq_low, low_handler);
> +	irq_set_chained_handler(qe_ic->virq_low, qe_ic_cascade_low_mpic);
>  
>  	if (qe_ic->virq_high != NO_IRQ &&
>  			qe_ic->virq_high != qe_ic->virq_low) {
>  		irq_set_handler_data(qe_ic->virq_high, qe_ic);
> -		irq_set_chained_handler(qe_ic->virq_high, high_handler);
> +		irq_set_chained_handler(qe_ic->virq_high,
> +					qe_ic_cascade_high_mpic);
>  	}
> +	of_node_put(node);
> +	return 0;
> +
> +err_domain_remove:
> +	irq_domain_remove(qe_ic->irqhost);
> +err_free_qe_ic:
> +	kfree(qe_ic);
> +err_put_node:
> +	of_node_put(node);
> +	return ret;
>  }
>  
>  void qe_ic_set_highest_priority(unsigned int virq, int high)
> @@ -570,45 +561,4 @@ int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high)
>  	return 0;
>  }
>  
> -static struct bus_type qe_ic_subsys = {
> -	.name = "qe_ic",
> -	.dev_name = "qe_ic",
> -};
> -
> -static struct device device_qe_ic = {
> -	.id = 0,
> -	.bus = &qe_ic_subsys,
> -};
> -
> -static int __init init_qe_ic_sysfs(void)
> -{
> -	int rc;
> -
> -	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
> -
> -	rc = subsys_system_register(&qe_ic_subsys, NULL);
> -	if (rc) {
> -		printk(KERN_ERR "Failed registering qe_ic sys class\n");
> -		return -ENODEV;
> -	}
> -	rc = device_register(&device_qe_ic);
> -	if (rc) {
> -		printk(KERN_ERR "Failed registering qe_ic sys device\n");
> -		return -ENODEV;
> -	}
> -	return 0;
> -}

You're removing this sysfs stuff. Granted, it is completely
pointless. Are you sure no userspace ever relied on this thing? In any
case, this needs documenting.

> -
> -static int __init qeic_of_init(struct device_node *node,
> -			       struct device_node *parent)
> -{
> -	if (!node)
> -		return -ENODEV;
> -	qe_ic_init(node, 0, qe_ic_cascade_low_mpic,
> -		   qe_ic_cascade_high_mpic);
> -	of_node_put(node);
> -	return 0;
> -}
> -
> -IRQCHIP_DECLARE(qeic, "fsl,qe-ic", qeic_of_init);
> -subsys_initcall(init_qe_ic_sysfs);
> +IRQCHIP_DECLARE(qeic, "fsl,qe-ic", qe_ic_init);
> diff --git a/include/soc/fsl/qe/qe_ic.h b/include/soc/fsl/qe/qe_ic.h
> index 1e155ca..6113699 100644
> --- a/include/soc/fsl/qe/qe_ic.h
> +++ b/include/soc/fsl/qe/qe_ic.h
> @@ -58,16 +58,9 @@ enum qe_ic_grp_id {
>  };
>  
>  #ifdef CONFIG_QUICC_ENGINE
> -void qe_ic_init(struct device_node *node, unsigned int flags,
> -		void (*low_handler)(struct irq_desc *desc),
> -		void (*high_handler)(struct irq_desc *desc));
>  unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
>  unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
>  #else
> -static inline void qe_ic_init(struct device_node *node, unsigned int flags,
> -		void (*low_handler)(struct irq_desc *desc),
> -		void (*high_handler)(struct irq_desc *desc))
> -{}
>  static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
>  { return 0; }
>  static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
> -- 
> 1.7.1
> 

Thanks,

	M.

-- 
Jazz is not dead, it just smell funny.

  reply	other threads:[~2019-03-25  9:24 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-25  3:52 [PATCH 0/4] This patchset is to remove PPCisms for QEIC Qiang Zhao
2019-03-25  3:53 ` [patch v14 1/4] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe Qiang Zhao
2019-03-25  3:53 ` [patch v14 2/4] irqchip/qeic: merge qeic init code from platforms to a common function Qiang Zhao
2019-03-25  9:20   ` Marc Zyngier
2019-03-25  3:53 ` [patch v14 3/4] irqchip/qeic: merge qeic_of_init into qe_ic_init Qiang Zhao
2019-03-25  9:24   ` Marc Zyngier [this message]
2019-03-25  3:53 ` [patch v14 4/4] irqchip/qeic: remove PPCisms for QEIC Qiang Zhao
2019-03-25  9:27   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=864l7rs3wp.wl-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qiang.zhao@nxp.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome