From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S966349AbYD1WDr (ORCPT ); Mon, 28 Apr 2008 18:03:47 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965393AbYD1WDf (ORCPT ); Mon, 28 Apr 2008 18:03:35 -0400 Received: from yw-out-2324.google.com ([74.125.46.31]:61825 "EHLO yw-out-2324.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965111AbYD1WDe (ORCPT ); Mon, 28 Apr 2008 18:03:34 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=NY9CKj0CfhRegwGajLqNEsrveLMg1o/vkbOfaGiecqRRz45CNi1EIXlMc9UK0lFEVsxT3fOlOaObobc9b7mIf4hL2XJRm++WCQf2FEvy7RvAPc9ErMB0k8H9CU3sJ6eSzW7BRQAF6lhiEdVCVKcNBpMXlQSe5RGeyz2XExV2JXQ= Message-ID: <86802c440804281503q1f9e6f8anb18cd514e89b76fe@mail.gmail.com> Date: Mon, 28 Apr 2008 15:03:28 -0700 From: "Yinghai Lu" To: "Gabriel C" Subject: Re: [PATCH] x86_32: trim memory by updating e820 v3 Cc: "Mika Fischer" , "Ingo Molnar" , "Andrew Morton" , "H. Peter Anvin" , LKML , "Jesse Barnes" , balajirrao@gmail.com, "Andi Kleen" , "Thomas Gleixner" In-Reply-To: <48163F56.70704@googlemail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline References: <200801192045.17291.yinghai.lu@sun.com> <86802c440804280234y5b38b4bds330fc1a6987202c5@mail.gmail.com> <48159ECF.9020004@googlemail.com> <20080428135351.GF3973@elte.hu> <4815DB15.4070908@zoopnet.de> <4815DE0C.6000802@googlemail.com> <86802c440804281206u6b5086a3h42192b7d36b08325@mail.gmail.com> <481627B7.9060406@googlemail.com> <4816376B.8060907@googlemail.com> <48163F56.70704@googlemail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Apr 28, 2008 at 2:19 PM, Gabriel C wrote: > > Gabriel C wrote: > > Gabriel C wrote: > >> Yinghai Lu wrote: > >>> On Mon, Apr 28, 2008 at 7:24 AM, Gabriel C wrote: > >>>> Mika Fischer wrote: > >>>> > Hi Ingo, > >>>> > > >>>> > I'm having the same problem. > >>>> > > >>>> > Ingo Molnar schrieb: > >>>> >> excellent. So just to make sure: this box never had proper graphics > >>>> >> under Linux (under no previous kernel), due to the way the BIOS has set > >>>> >> up the MTRR's, right? > >>>> > > >>>> > Well, not quite. X still works fine, but since the video memory is > >>>> > overlapped by two of the existing MTRRs, X cannot add a write-combining > >>>> > range for the video memory. That makes X rather slow especially if you > >>>> > use DRI for Compiz etc. > >>>> > >>>> Well you are lucky then :) > >>>> > >>>> Yeah X 'worked' but it worked as slow as with vesa video driver here. > >>> [ 0.000000] rangeX: 0000000000000000 - 00000000d0000000 > >>> [ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB > >>> [ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB > >>> [ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB > >>> [ 0.000000] range0: 00000000cf800000 - 00000000cf800000 > >>> [ 0.000000] range: 00000000cf800000 - 00000000d0000000 > >>> [ 0.000000] Setting variable MTRR 3, base: 3320MB, range: 8MB, type WB > >>> [ 0.000000] range0: 0000000100000000 - 0000000120000000 > >>> [ 0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB > >>> [ 0.000000] range: 0000000120000000 - 0000000130000000 > >>> [ 0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB > >>> [ 0.000000] hole: 000000012c000000 - 0000000130000000 > >>> [ 0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC > >>> > >>> so your X server need two entries for WB? > >>> > >>> can you send out /proc/mtrr with booting with disable_mtrr_cleanup? > >> I can just not right now , cannot reboot the box yet. In about 1h or so , maybe less. > > > > Here the output with v3 which is disabled by default: > > > > --($:~)-- cat /proc/mtrr > > reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 > > reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 > > reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 > > reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 > > reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 > > reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 > > reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 > > > > dmesg is saying now : > > > > [ 22.764595] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining > > > > > > My card settings in BIOS ( that was default ) are the following : > > > > DVMT Mode -> DVMT Mode ( possible setting DVMT Mode or Fixed Mode ) > > DVMT / Memory -> 256MB ( possible settings 128/256 MB or Maximum DVMT ) > > > > Initiate Graphics Adapter -> PEG/PCI ( possible settings IGD , PCI/IGD , PCI/PEG , PEG/IGD ) > > Internal Graphics Mode Select -> Enabled,8MB ( possible settings Enabled,8MB , Enabled,1MB maybe Disabled I forgot to look) > > PEG Port -> Auto ( possible settings Auto , Disabled ) > > PEG Port Force x1 -> Disabled ( possible settings Enabled , Disabled ) > > > > Of course these settings are only possible when the card is not disabled :) > > > > I'm gonna try v4 now and enable it. Please let me know if you need more infos. > > Hmm v4 doesn't work anymore here ( I've tested with all possible settings in BIOS ). > It takes 6 minutes to boot to : > so you card is using 256M and 8M? 0xd0000000-0xe0000000, where is another 8M address. mtrr by BIOS is very interesting: before > > reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1 > > reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1 > > reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1 > > reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1 > > reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1 > > reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1 > > reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1 after 256M chunk size got > >>> [ 0.000000] Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB > >>> [ 0.000000] Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB > >>> [ 0.000000] Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB > >>> [ 0.000000] Setting variable MTRR 3, base: 3320MB, range: 8MB, type WB > >>> [ 0.000000] Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB > >>> [ 0.000000] Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB > >>> [ 0.000000] Setting variable MTRR 6, base: 4800MB, range: 64MB, type UC so the convering is right..., need to spare another entry for your card. or we can dumping the > >>> [ 0.000000] Setting variable MTRR 3, base: 3320MB, range: 8MB, type WB for extra entra... but the mtrr trimming code need to be updated instead of only using highest_pfn YH