Re: macbook2,2 latest git mmconfig issues

["Yinghai Lu" <yhlu.kernel@gmail.com>]

On Fri, Jul 18, 2008 at 11:54 PM, Justin Mattock
<justinmattock@gmail.com> wrote:
> On Fri, Jul 18, 2008 at 10:54 PM, Justin Mattock
> <justinmattock@gmail.com> wrote:
>> On Fri, Jul 18, 2008 at 9:45 PM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
>>> On Fri, Jul 18, 2008 at 8:39 PM, Justin Mattock <justinmattock@gmail.com> wrote:
>>>> Hello;
>>>> Well I couldn't really see what was happening
>>>> until I could experience this myself;
>>>> It seems the macbook pro ati chipset
>>>> is having the same problem as jack was with mmconfig yesterday.
>>>> I'm confused as to why my system was able to run this kernel(2.6.26.git1)
>>>> without a problem, now after doing a reinstall of the operating system
>>>> I am confronted with this same issue. How do I find the 0x3f number on
>>>> my system,
>>>> so I could plug that into the patch? to see if I can boot up
>>>> Now keep in mind the only difference with this install is the
>>>> installer took a dump
>>>> therefore you have to manually install grub(could this be the source
>>>> of the issue?)
>>>> regards;
>>>
>>> can you disable ASPM in your config.?
>>>
>>> YH
>>>
>>
>> I enabled and disabled in the pci section
>> PCIEASPM still the same results.
>> applied the patch as well i.g.
>> mmconf_dmi_table
>> going to try detect end_bus_number patch to
>> see if it works
>> --
>> Justin P. Mattock
>>
>
> applied both patches and messed with boot options
> but no go:
> this is what I'm seeing
> PCI: Fatal no config space access function found
> ata-piix 0000:00:1f11 device not available
> because of BAR0 [0xf0-0x1f7] collisions

can you send out your .config?

YH