Re: [PATCH 00/53] dyn_array/nr_irqs/sparse_irq support v10

["Yinghai Lu" <yhlu.kernel@gmail.com>]

find something interesting:

found new irq_cfg for irq 20
 0 add_pin_to_irq: irq 20 --> apic 0 pin 20
assign_irq_vector: irq 20 vector 0x59 cpu  5
IOAPIC[0]: Set routing entry (0-20 -> 0x59 -> IRQ 20 Mode:1 Active:1)
found new irq_desc for irq 20
pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20

IO APIC #0......
.... register #00: 00000000
.......    : physical APIC id: 00
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
...
 14 09  1    1    0   1   0    0    0    59
...

ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
do_IRQ: cannot handle IRQ -1 vector 0x59 cpu 0
------------[ cut here ]------------
Kernel BUG at 40206b11 [verbose debug info unavailable]
invalid opcode: 0000 [#1] SMP
Modules linked in:

Pid: 70, comm: kasyncinit Not tainted (2.6.27-rc3-tip-00191-g98ccb89-dirty #23)
EIP: 0060:[<40206b11>] EFLAGS: 00010092 CPU: 0
EIP is at do_IRQ+0x6b/0xae
EAX: 00000032 EBX: 00001d28 ECX: 00003434 EDX: 00000046
ESI: 00000000 EDI: 00000059 EBP: c7a37d3c ESP: c7a37d14
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kasyncinit (pid: 70, ti=c7a36000 task=c79c9860 task.ti=c7a36000)
Stack: 40a74317 40814ea0 ffffffff 00000059 00000000 00000000 ffffffff c421bd20
       c7a37d9c c7a37dac c7a37d7c 4020555f c421bd20 00000000 c421bd20 c7a37d9c
       c7a37dac c7a37d7c 40b717f8 0000007b 0000007b 000000d8 ffffffa6 4080db6c
Call Trace:
 [<4020555f>] ? common_interrupt+0x23/0x28


it is on 16cores system with 32bit bigsmp, so it is using phy_flat
cpu 5 has apicid 9, and ioapic reg setting right with Dmod= 0 ( phys)

but io_apic controller deliver that interrupt to cpu0 (with apicid =
4) instead of cpu 5 (with apic id = 9)

look at the 64 bit, TARGET_CPUS for phys_flat is cpu_online_map

and 32bit bigsmp TARGET_CPUS is only one cpu set and rotating with online cpu...

Change 32bit bigsmp TARGE_CPUS ?

YH