From: "Yinghai Lu" <yhlu.kernel@gmail.com>
To: "Cyrill Gorcunov" <gorcunov@gmail.com>
Cc: "Ingo Molnar" <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Maciej W. Rozycki" <macro@linux-mips.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] x86: io-apic - get rid of __DO_ACTION macro
Date: Wed, 10 Sep 2008 11:40:04 -0700 [thread overview]
Message-ID: <86802c440809101140w55602b9as94b09b4d7c3ea661@mail.gmail.com> (raw)
In-Reply-To: <20080910181950.GC8067@lenovo>
On Wed, Sep 10, 2008 at 11:19 AM, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> [Yinghai Lu - Wed, Sep 10, 2008 at 10:30:39AM -0700]
> | On Wed, Sep 10, 2008 at 2:31 AM, Ingo Molnar <mingo@elte.hu> wrote:
> | >
> | > * Yinghai Lu <yhlu.kernel@gmail.com> wrote:
> | >
> | >> On Tue, Sep 9, 2008 at 11:02 PM, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> | >> > On Wed, Sep 10, 2008 at 12:13 AM, Yinghai Lu <yhlu.kernel@gmail.com> wrote:
> | >> > ...
> | >> >>
> | >> >> hope we can keep using MACRO..
> | >> >>
> | >> >> YH
> | >> >>
> | >> >
> | >> > Btw, Yinghai, what does it mean? To not touch this macro at all?
> | >> > Or you mean about implementation issue (ie the design itself)?
> | >>
> | >> do not touch this macro... and may revisit after 2.6.28
> | >
> | > anything you are particularly worried about? Regressions we should be
> | > able to find pretty quickly, in a central macro like that - and the
> | > macro is quite ugly.
> | >
> |
> | ok, let remove unneeded "if", and use function pointer...
> |
> | void (*extra_action_t)(struct irq_pin_list *entry);
> |
> | +static inline void io_apic_modify_irq(unsigned int irq,
> | + int mask_and, int mask_or,
> | + int mask_and_not, extra_action_t action)
> | +{
> | + int pin;
> | + struct irq_cfg *cfg;
> | + struct irq_pin_list *entry;
> | + cfg = irq_cfg(irq);
> | + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
> | + unsigned int reg;
> | + pin = entry->pin;
> | + reg = io_apic_read(entry->apic, 0x10 + pin * 2);
> | + reg &= mask_and;
> | + reg |= mask_or;
> | + reg &= ~mask_and_not;
> | + io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
> | + if (action)
> | + action(entry);
> | + }
> | +}
> |
> | +void extra_read(struct irq_pin_list *entry)
> | + {
> | + /*
> | + * Synchronize the IO-APIC and the CPU by doing
> | + * a dummy read from the IO-APIC
> | + */
> | + struct io_apic __iomem *io_apic;
> | + io_apic = io_apic_base(entry->apic);
> | + readl(&io_apic->data);
> | + }
> |
> |
> | YH
> |
>
> Yinghai, Ingo, what about this one?
>
> - Cyrill -
> ---
> From: Cyrill Gorcunov <gorcunov@gmail.com>
> Subject: x86: io-apic - get rid of __DO_ACTION macro v3
>
> Replace __DO_ACTION macro with io_apic_modify_irq function.
> This allow us to 'grep' definitions being hided by
> __DO_ACTION macro:
>
> __unmask_IO_APIC_irq
> __mask_IO_APIC_irq
> __mask_and_edge_IO_APIC_irq
> __unmask_and_level_IO_APIC_irq
>
> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
> CC: Yinghai Lu <yhlu.kernel@gmail.com>
> ---
>
> Index: linux-2.6.git/arch/x86/kernel/io_apic.c
> ===================================================================
> --- linux-2.6.git.orig/arch/x86/kernel/io_apic.c 2008-09-09 22:27:57.000000000 +0400
> +++ linux-2.6.git/arch/x86/kernel/io_apic.c 2008-09-10 22:17:25.000000000 +0400
> @@ -643,65 +643,66 @@ static void __init replace_pin_at_irq(un
> add_pin_to_irq(irq, newapic, newpin);
> }
>
> -#define __DO_ACTION(R, ACTION_ENABLE, ACTION_DISABLE, FINAL) \
> - \
> -{ \
> - int pin; \
> - struct irq_cfg *cfg; \
> - struct irq_pin_list *entry; \
> - \
> - cfg = irq_cfg(irq); \
> - entry = cfg->irq_2_pin; \
> - for (;;) { \
> - unsigned int reg; \
> - if (!entry) \
> - break; \
> - pin = entry->pin; \
> - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \
> - reg ACTION_DISABLE; \
> - reg ACTION_ENABLE; \
> - io_apic_modify(entry->apic, 0x10 + R + pin*2, reg); \
> - FINAL; \
> - if (!entry->next) \
> - break; \
> - entry = entry->next; \
> - } \
> -}
> -
> -#define DO_ACTION(name,R, ACTION_ENABLE, ACTION_DISABLE, FINAL) \
> - \
> - static void name##_IO_APIC_irq (unsigned int irq) \
> - __DO_ACTION(R, ACTION_ENABLE, ACTION_DISABLE, FINAL)
> +static inline void io_apic_modify_irq(unsigned int irq,
> + int mask_and, int mask_or,
> + void (*final)(struct irq_pin_list *entry))
> +{
> + int pin;
> + struct irq_cfg *cfg;
> + struct irq_pin_list *entry;
>
> -/* mask = 0 */
> -DO_ACTION(__unmask, 0, |= 0, &= ~IO_APIC_REDIR_MASKED, )
> + cfg = irq_cfg(irq);
> + for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
> + unsigned int reg;
> + pin = entry->pin;
> + reg = io_apic_read(entry->apic, 0x10 + pin * 2);
> + reg &= mask_and;
> + reg |= mask_or;
> + io_apic_modify(entry->apic, 0x10 + pin * 2, reg);
> + if (final)
> + final(entry);
> + }
> +}
> +
> +static void __unmask_IO_APIC_irq(unsigned int irq)
> +{
> + io_apic_modify_irq(irq, ~IO_APIC_REDIR_MASKED, 0, NULL);
> +}
>
> #ifdef CONFIG_X86_64
> -/*
> - * Synchronize the IO-APIC and the CPU by doing
> - * a dummy read from the IO-APIC
> - */
> -static inline void io_apic_sync(unsigned int apic)
> +void io_apic_sync(struct irq_pin_list *entry)
> {
> - struct io_apic __iomem *io_apic = io_apic_base(apic);
> + /*
> + * Synchronize the IO-APIC and the CPU by doing
> + * a dummy read from the IO-APIC
> + */
> + struct io_apic __iomem *io_apic;
> + io_apic = io_apic_base(entry->apic);
> readl(&io_apic->data);
> }
>
> -/* mask = 1 */
> -DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, &= ~0, io_apic_sync(entry->apic))
> -
> -#else
> -
> -/* mask = 1 */
> -DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, &= ~0, )
> -
> -/* mask = 1, trigger = 0 */
> -DO_ACTION(__mask_and_edge, 0, |= IO_APIC_REDIR_MASKED, &= ~IO_APIC_REDIR_LEVEL_TRIGGER, )
> +static void __mask_IO_APIC_irq(unsigned int irq)
> +{
> + io_apic_modify_irq(irq, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
> +}
> +#else /* CONFIG_X86_32 */
> +static void __mask_IO_APIC_irq(unsigned int irq)
> +{
> + io_apic_modify_irq(irq, ~0, IO_APIC_REDIR_MASKED, NULL);
> +}
>
> -/* mask = 0, trigger = 1 */
> -DO_ACTION(__unmask_and_level, 0, |= IO_APIC_REDIR_LEVEL_TRIGGER, &= ~IO_APIC_REDIR_MASKED, )
> +static void __mask_and_edge_IO_APIC_irq(unsigned int irq)
> +{
> + io_apic_modify_irq(irq, ~IO_APIC_REDIR_LEVEL_TRIGGER,
> + IO_APIC_REDIR_MASKED, NULL);
> +}
>
> -#endif
> +static void __unmask_and_level_IO_APIC_irq(unsigned int irq)
> +{
> + io_apic_modify_irq(irq, ~IO_APIC_REDIR_MASKED,
> + IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
> +}
> +#endif /* CONFIG_X86_32 */
>
> static void mask_IO_APIC_irq (unsigned int irq)
> {
>
looks good.
YH
next prev parent reply other threads:[~2008-09-10 18:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-09 18:46 Cyrill Gorcunov
2008-09-09 20:13 ` Yinghai Lu
2008-09-09 20:28 ` Cyrill Gorcunov
2008-09-10 6:02 ` Cyrill Gorcunov
2008-09-10 6:22 ` Yinghai Lu
2008-09-10 8:40 ` Cyrill Gorcunov
2008-09-10 9:31 ` Ingo Molnar
2008-09-10 10:53 ` Cyrill Gorcunov
2008-09-10 17:30 ` Yinghai Lu
2008-09-10 17:44 ` Cyrill Gorcunov
2008-09-10 18:19 ` Cyrill Gorcunov
2008-09-10 18:40 ` Yinghai Lu [this message]
2008-09-11 7:08 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86802c440809101140w55602b9as94b09b4d7c3ea661@mail.gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=gorcunov@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=macro@linux-mips.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®