mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	macro@linux-mips.org, Cyrill Gorcunov <gorcunov@openvz.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] v2: x86,APIC: Detect lapic_is_integrated() once - use on  and on
Date: Mon, 25 May 2009 19:11:42 -0700	[thread overview]
Message-ID: <86802c440905251911h6f6c146eo4c30d306ac8d17d8@mail.gmail.com> (raw)
In-Reply-To: <b9df5fa10905251820l3783327ek4f6b7014aa167690@mail.gmail.com>

On Mon, May 25, 2009 at 6:20 PM, Rakib Mullick <rakib.mullick@gmail.com> wrote:
>  This patch was sent previously (http://lkml.org/lkml/2009/5/22/240) -
> but that one contains flaw as that one prevents compiler to optimize
> the X86_64 case out. Thomas Gleixner (so thanks Thomas) shows how to
> prevent that flaw. Also it helps to avoid cache line pollution. So, I
> think with this patch everyone would be happy.
>
> Thanks,
> --
> Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
>
> --- linus/arch/x86/kernel/apic/apic.c   2009-05-25 00:20:25.000000000 +0600
> +++ rakib/arch/x86/kernel/apic/apic.c   2009-05-25 00:50:08.333910872 +0600
> @@ -127,6 +127,13 @@ early_param("nox2apic", setup_nox2apic);
>
>  unsigned long mp_lapic_addr;
>  int disable_apic;
> +
> +#ifdef CONFIG_X86_64
> +# define integrated_lapic (1)
> +#else
> +static int integrated_lapic __read_mostly;
> +#endif
> +
>  /* Disable local APIC timer from the kernel commandline or via dmi quirk */
>  static int disable_apic_timer __cpuinitdata;
>  /* Local APIC timer works in C2 */
> @@ -188,12 +195,10 @@ static inline int lapic_get_version(void
>  /*
>  * Check, if the APIC is integrated or a separate chip
>  */
> -static inline int lapic_is_integrated(void)
> +static inline void lapic_is_integrated(void)
>  {
> -#ifdef CONFIG_X86_64
> -       return 1;
> -#else
> -       return APIC_INTEGRATED(lapic_get_version());
> +#ifdef CONFIG_X86_32
> +       integrated_lapic = APIC_INTEGRATED(lapic_get_version());
>  #endif
>  }
>
> @@ -258,7 +263,7 @@ void __cpuinit enable_NMI_through_LVT0(v
>        v = APIC_DM_NMI;
>
>        /* Level triggered for 82489DX (32bit mode) */
> -       if (!lapic_is_integrated())
> +       if (!integrated_lapic)
>                v |= APIC_LVT_LEVEL_TRIGGER;
>
>        apic_write(APIC_LVT0, v);
> @@ -313,7 +318,7 @@ static void __setup_APIC_LVTT(unsigned i
>        lvtt_value = LOCAL_TIMER_VECTOR;
>        if (!oneshot)
>                lvtt_value |= APIC_LVT_TIMER_PERIODIC;
> -       if (!lapic_is_integrated())
> +       if (!integrated_lapic)
>                lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
>
>        if (!irqen)
> @@ -869,7 +874,7 @@ void clear_local_APIC(void)
>                apic_write(APIC_LVTPC, APIC_LVT_MASKED);
>
>        /* Integrated APIC (!82489DX) ? */
> -       if (lapic_is_integrated()) {
> +       if (integrated_lapic) {
>                if (maxlvt > 3)
>                        /* Clear ESR due to Pentium errata 3AP and 11AP */
>                        apic_write(APIC_ESR, 0);
> @@ -1064,7 +1069,7 @@ void __init init_bsp_APIC(void)
>         */
>        apic_write(APIC_LVT0, APIC_DM_EXTINT);
>        value = APIC_DM_NMI;
> -       if (!lapic_is_integrated())             /* 82489DX */
> +       if (!integrated_lapic)          /* 82489DX */
>                value |= APIC_LVT_LEVEL_TRIGGER;
>        apic_write(APIC_LVT1, value);
>  }
> @@ -1073,7 +1078,7 @@ static void __cpuinit lapic_setup_esr(vo
>  {
>        unsigned int oldvalue, value, maxlvt;
>
> -       if (!lapic_is_integrated()) {
> +       if (!integrated_lapic) {
>                pr_info("No ESR for 82489DX.\n");
>                return;
>        }
> @@ -1126,7 +1131,7 @@ void __cpuinit setup_local_APIC(void)
>
>  #ifdef CONFIG_X86_32
>        /* Pound the ESR really hard over the head with a big hammer - mbligh */
> -       if (lapic_is_integrated() && apic->disable_esr) {
> +       if (integrated_lapic && apic->disable_esr) {
>                apic_write(APIC_ESR, 0);
>                apic_write(APIC_ESR, 0);
>                apic_write(APIC_ESR, 0);
> @@ -1251,7 +1256,7 @@ void __cpuinit setup_local_APIC(void)
>                value = APIC_DM_NMI;
>        else
>                value = APIC_DM_NMI | APIC_LVT_MASKED;
> -       if (!lapic_is_integrated())             /* 82489DX */
> +       if (!integrated_lapic)          /* 82489DX */
>                value |= APIC_LVT_LEVEL_TRIGGER;
>        apic_write(APIC_LVT1, value);
>
> @@ -1599,6 +1604,8 @@ int __init APIC_init_uniprocessor(void)
>                clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
>                return -1;
>        }
> +       /* Determine APIC is integrated or not. */
> +       lapic_is_integrated();
>  #endif
>
>        enable_IR_x2apic();
> --

do you need to call lapic_is_integrated() for 32bit smp?

YH

  reply	other threads:[~2009-05-26  2:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-26  1:20 Rakib Mullick
2009-05-26  2:11 ` Yinghai Lu [this message]
2009-05-27  2:49   ` Rakib Mullick
2009-06-10 11:24     ` Rakib Mullick
2009-06-10 11:34       ` Thomas Gleixner
2009-06-14 13:16         ` Rakib Mullick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86802c440905251911h6f6c146eo4c30d306ac8d17d8@mail.gmail.com \
    --to=yhlu.kernel@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=gorcunov@openvz.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=macro@linux-mips.org \
    --cc=mingo@elte.hu \
    --cc=rakib.mullick@gmail.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®