From: Yinghai Lu <yhlu.kernel@gmail.com>
To: Volker Armin Hemmann <volkerarmin@googlemail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: amd64 + mtrr: only 3.1gb of 8gb are covered, kernel 2.6.30 and earlier.
Date: Sat, 22 Aug 2009 11:48:52 -0700 [thread overview]
Message-ID: <86802c440908221148q2aee29e0i3fe966c60fced3db@mail.gmail.com> (raw)
In-Reply-To: <200908211814.56800.volkerarmin@googlemail.com>
On Fri, Aug 21, 2009 at 9:14 AM, Volker Armin
Hemmann<volkerarmin@googlemail.com> wrote:
> Hi,
>
> I have an amd64 system with 8GB ram. Of these only 3.1GB are currently covered
> with mtrr:
> cat /proc/mtrr
> reg00: base=0x000000000 ( 0MB), size= 2048MB, count=1: write-back
> reg01: base=0x080000000 ( 2048MB), size= 1024MB, count=1: write-back
> reg02: base=0x0c0000000 ( 3072MB), size= 128MB, count=1: write-back
>
> This is with a Phenom II X4. Mobo is an Asrock A770Crossfire with AMD 770
> chipset. Ram is 1066 ddr2 running at 800.
>
> Before that I had a X2 6000 where I had one more mtrr, covering additional
> 256mb with 6gb ram total.
>
> When I use the opensource driver, I get a 'mtrr disabled' message when X
> starts, nothing like that with fglrx. The results are the same.
>
> Is there anything that I can do about it? I already played with mtrr cleanup
> options - without any results.
>
> Except for reiser4 the kernel is 'vanilla', config is attached, dmesg and lspci
> are folloiwing:
>
> dmesg:
> [ 0.000000] Linux version 2.6.30.5r4 (root@energy) (gcc version 4.4.1
> (Gentoo 4.4.1 p1.0) ) #1 SMP Tue Aug 18 06:28:18 CEST 2009
> [ 0.000000] Command line: root=/dev/md1 md=3,/dev/sda3,/dev/sdb3,/dev/sdc3
> nmi_watchdog=0 mtrr_spare_reg_nr=1
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7eb0000 (usable)
> [ 0.000000] BIOS-e820: 00000000c7eb0000 - 00000000c7ec0000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000c7ec0000 - 00000000c7ef0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000c7ef0000 - 00000000c7f00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
> [ 0.000000] DMI present.
> [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
> ==> (reserved)
> [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x100000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-EFFFF uncachable
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
> [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
> [ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] TOM2: 0000000238000000 aka 9088M
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable)
> ==> (reserved)
...
>
> 02:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3870 (prog-
> if 00 [VGA controller])
> Subsystem: Info-Tek Corp. Device 4070
> Flags: bus master, fast devsel, latency 0, IRQ 30
> Memory at d0000000 (64-bit, prefetchable) [size=256M]
> Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
> I/O ports at b000 [size=256]
> Expansion ROM at fdfc0000 [disabled] [size=128K]
> Capabilities: [50] Power Management version 3
> Capabilities: [58] Express Legacy Endpoint, MSI 00
> Capabilities: [a0] MSI: Mask- 64bit+ Count=1/1 Enable+
> Capabilities: [100] Vendor Specific Information <?>
> Kernel driver in use: fglrx_pci
> Kernel modules: fglrx
after your start X server, how about cat /proc/mtrr?
thought there should be one WC entry about 256M... for graphics card.
YH
next prev parent reply other threads:[~2009-08-22 18:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-21 16:14 Volker Armin Hemmann
2009-08-22 5:43 ` Robert Hancock
2009-08-22 18:48 ` Yinghai Lu [this message]
2009-08-22 18:54 ` Volker Armin Hemmann
2009-08-22 19:04 ` Yinghai Lu
[not found] ` <200908222126.31390.volkerarmin@googlemail.com>
[not found] ` <86802c440908222322s44957498s72a76940f89271cf@mail.gmail.com>
2009-08-23 9:11 ` Volker Armin Hemmann
2009-08-27 1:13 ` Volker Armin Hemmann
2009-08-27 7:13 ` Yinghai Lu
2009-08-27 16:28 ` Volker Armin Hemmann
2009-09-19 20:11 ` Volker Armin Hemmann
2009-09-20 6:03 ` Yinghai Lu
2009-09-29 17:32 ` Volker Armin Hemmann
2009-09-29 19:23 ` Yinghai Lu
2009-09-29 19:24 ` Volker Armin Hemmann
2009-08-22 19:29 Volker Armin Hemmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86802c440908221148q2aee29e0i3fe966c60fced3db@mail.gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=volkerarmin@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®