mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: ALOK TIWARI <alok.a.tiwari@oracle.com>
To: Parvathi Pudi <parvathi@couthit.com>,
	danishanwar@ti.com, rogerq@kernel.org, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, nm@ti.com, ssantosh@kernel.org,
	tony@atomide.com, richardcochran@gmail.com,
	glaroque@baylibre.com, schnelle@linux.ibm.com,
	m-karicheri2@ti.com, s.hauer@pengutronix.de,
	rdunlap@infradead.org, diogo.ivo@siemens.com,
	basharath@couthit.com, horms@kernel.org,
	jacob.e.keller@intel.com, m-malladi@ti.com,
	javier.carrasco.cruz@gmail.com, afd@ti.com, s-anna@ti.com
Cc: linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	pratheesh@ti.com, prajith@ti.com, vigneshr@ti.com,
	praneeth@ti.com, srk@ti.com, rogerq@ti.com, krishna@couthit.com,
	pmohan@couthit.com, mohan@couthit.com
Subject: Re: [PATCH net-next v6 05/11] net: ti: prueth: Adds ethtool support for ICSSM PRUETH Driver
Date: Sat, 3 May 2025 14:59:31 +0530	[thread overview]
Message-ID: <868c8163-d776-4ff4-b516-3046c5db0fc0@oracle.com> (raw)
In-Reply-To: <20250423072356.146726-6-parvathi@couthit.com>



On 23-04-2025 12:53, Parvathi Pudi wrote:
> From: Roger Quadros <rogerq@ti.com>
> 
> Changes for enabling ethtool support for the newly added PRU Ethernet
> interfaces. Extends the support for statistics collection from PRU internal
> memory and displays it in the user space. Along with statistics,
> enable/disable of features, configuring link speed etc.are now supported.

etc.are -> etc. are

> 
> The firmware running on PRU maintains statistics in internal data memory.
> When requested ethtool collects all the statistics for the specified
> interface and displays it in the user space.
> 

> --- a/drivers/net/ethernet/ti/Makefile
> +++ b/drivers/net/ethernet/ti/Makefile
> @@ -4,7 +4,7 @@
>   #
>   
[clip]
> +}
> +
> +static void icssm_emac_get_regs(struct net_device *ndev,
> +				struct ethtool_regs *regs, void *p)
> +{
> +	struct prueth_emac *emac = netdev_priv(ndev);
> +	struct prueth *prueth = emac->prueth;
> +
> +	regs->version = PRUETH_REG_DUMP_GET_VER(prueth);
> +}
> +
> +static const struct ethtool_rmon_hist_range icssm_emac_rmon_ranges[] = {
> +	{    0,   64},
> +	{   65,  127},
> +	{  128,  255},
> +	{  256,  511},
> +	{  512,  1023},
> +	{ 1024,  EMAC_MAX_PKTLEN},
> +	{}
> +};
> +
> +static void
> +icssm_emac_get_rmon_stats(struct net_device *ndev,
> +			  struct ethtool_rmon_stats *rmon_stats,
> +			  const struct ethtool_rmon_hist_range **ranges)
> +{
> +	struct prueth_emac *emac = netdev_priv(ndev);
> +	struct port_statistics pstats;
> +
> +	*ranges = icssm_emac_rmon_ranges;
> +	icssm_emac_get_stats(emac, &pstats);
> +
> +	rmon_stats->undersize_pkts = pstats.rx_undersized_frames;
> +	rmon_stats->oversize_pkts  = pstats.rx_oversized_frames;

remove extra ' ' before =

> +
> +	rmon_stats->hist[0] = pstats.tx64byte;
> +	rmon_stats->hist[1] = pstats.tx65_127byte;
> +	rmon_stats->hist[2] = pstats.tx128_255byte;
> +	rmon_stats->hist[3] = pstats.tx256_511byte;
> +	rmon_stats->hist[4] = pstats.tx512_1023byte;
> +
> +	rmon_stats->hist_tx[0] = pstats.rx64byte;
> +	rmon_stats->hist_tx[1] = pstats.rx65_127byte;
> +	rmon_stats->hist_tx[2] = pstats.rx128_255byte;
> +	rmon_stats->hist_tx[3] = pstats.rx256_511byte;
> +	rmon_stats->hist_tx[4] = pstats.rx1024byte;
> +}
> +
> +static void
> +icssm_emac_get_eth_mac_stats(struct net_device *ndev,
> +			     struct ethtool_eth_mac_stats *mac_stats)
> +{
> +	struct prueth_emac *emac = netdev_priv(ndev);
> +	struct port_statistics pstats;
> +
> +	icssm_emac_get_stats(emac, &pstats);
> +
> +	mac_stats->LateCollisions = pstats.late_coll;
> +	mac_stats->SingleCollisionFrames = pstats.single_coll;
> +	mac_stats->MultipleCollisionFrames = pstats.multi_coll;
> +}
> +
> +/* Ethtool support for EMAC adapter */
> +const struct ethtool_ops emac_ethtool_ops = {
> +	.get_drvinfo = icssm_emac_get_drvinfo,
> +	.get_link_ksettings = phy_ethtool_get_link_ksettings,
> +	.set_link_ksettings = phy_ethtool_set_link_ksettings,
> +	.get_link = ethtool_op_get_link,
> +	.get_sset_count = icssm_emac_get_sset_count,
> +	.get_strings = icssm_emac_get_strings,
> +	.get_ethtool_stats = icssm_emac_get_ethtool_stats,
> +	.get_regs = icssm_emac_get_regs,
> +	.get_rmon_stats = icssm_emac_get_rmon_stats,
> +	.get_eth_mac_stats = icssm_emac_get_eth_mac_stats,
> +};
> +EXPORT_SYMBOL_GPL(emac_ethtool_ops);
> diff --git a/drivers/net/ethernet/ti/icssm/icssm_prueth.c b/drivers/net/ethernet/ti/icssm/icssm_prueth.c
> index 7aae12383ad3..b37991b04dd1 100644
> --- a/drivers/net/ethernet/ti/icssm/icssm_prueth.c
> +++ b/drivers/net/ethernet/ti/icssm/icssm_prueth.c
> @@ -901,6 +901,8 @@ static int icssm_emac_ndo_open(struct net_device *ndev)
>   
>   	icssm_prueth_emac_config(emac);
>   
> +	icssm_emac_set_stats(emac, &emac->stats);
> +
>   	ret = icssm_emac_set_boot_pru(emac, ndev);
>   	if (ret)
>   		return ret;
> @@ -952,6 +954,8 @@ static int icssm_emac_ndo_stop(struct net_device *ndev)
>   	/* stop the PRU */
>   	rproc_shutdown(emac->pru);
>   
> +	icssm_emac_get_stats(emac, &emac->stats);
> +
>   	/* free rx interrupts */
>   	free_irq(emac->rx_irq, ndev);
>   
> @@ -1045,10 +1049,39 @@ static enum netdev_tx icssm_emac_ndo_start_xmit(struct sk_buff *skb,
>   	return ret;
>   }
>   
> +/**
> + * icssm_emac_ndo_get_stats64 - EMAC get statistics function
> + * @ndev: The EMAC network adapter
> + * @stats: rtnl_link_stats structure
> + *
> + * Called when system wants to get statistics from the device.
> + *
> + */
> +static void icssm_emac_ndo_get_stats64(struct net_device *ndev,
> +				       struct rtnl_link_stats64 *stats)
> +{
> +	struct prueth_emac *emac = netdev_priv(ndev);
> +	struct port_statistics pstats;
> +
> +	icssm_emac_get_stats(emac, &pstats);
> +
> +	stats->rx_packets = ndev->stats.rx_packets;
> +	stats->rx_bytes   = ndev->stats.rx_bytes;
> +	stats->tx_packets = ndev->stats.tx_packets;
> +	stats->tx_bytes   = ndev->stats.tx_bytes;
> +	stats->tx_errors  = ndev->stats.tx_errors;
> +	stats->tx_dropped = ndev->stats.tx_dropped;
> +	stats->multicast  = pstats.rx_mcast;
> +
> +	stats->rx_over_errors   = ndev->stats.rx_over_errors;
> +	stats->rx_length_errors = ndev->stats.rx_length_errors;

remove extra ' ' before =

> +}
> +
>   static const struct net_device_ops emac_netdev_ops = {
>   	.ndo_open = icssm_emac_ndo_open,
>   	.ndo_stop = icssm_emac_ndo_stop,
>   	.ndo_start_xmit = icssm_emac_ndo_start_xmit,
> +	.ndo_get_stats64 = icssm_emac_ndo_get_stats64,
>   };
>   
>   /* get emac_port corresponding to eth_node name */
> @@ -1177,6 +1210,7 @@ static int icssm_prueth_netdev_init(struct prueth *prueth,
>   	phy_remove_link_mode(emac->phydev, ETHTOOL_LINK_MODE_Asym_Pause_BIT);
>   
>   	ndev->netdev_ops = &emac_netdev_ops;
> +	ndev->ethtool_ops = &emac_ethtool_ops;
>   
>   	return 0;
>   free:
> diff --git a/drivers/net/ethernet/ti/icssm/icssm_prueth.h b/drivers/net/ethernet/ti/icssm/icssm_prueth.h
> index 3c70dc9c4be0..39ceed0e2d15 100644
> --- a/drivers/net/ethernet/ti/icssm/icssm_prueth.h
> +++ b/drivers/net/ethernet/ti/icssm/icssm_prueth.h
> @@ -27,6 +27,12 @@
>   #define EMAC_MAX_FRM_SUPPORT (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN + \
>   			      ICSSM_LRE_TAG_SIZE)
>   
> +#define PRUETH_REG_DUMP_VER		1
> +
> +/* Encoding: 32-16: Reserved, 16-8: Reg dump version, 8-0: Ethertype  */

remove extra ' ' after Ethertype

> +#define PRUETH_REG_DUMP_GET_VER(x)	((PRUETH_REG_DUMP_VER << 8) | \
> +					 ((x)->eth_type))
> +
>   /* PRU Ethernet Type - Ethernet functionality (protocol
>    * implemented) provided by the PRU firmware being loaded.
>    */
> @@ -108,6 +114,119 @@ struct prueth_packet_info {
>   	bool timestamp;
>   };

Thanks,
Alok

  parent reply	other threads:[~2025-05-03  9:32 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-23  6:06 [PATCH net-next v6 00/11] PRU-ICSSM Ethernet Driver Parvathi Pudi
2025-04-23  6:06 ` [PATCH net-next v6 01/11] dt-bindings: net: ti: Adds DUAL-EMAC mode support on PRU-ICSS2 for AM57xx, AM43xx and AM33xx SOCs Parvathi Pudi
2025-04-25 21:19   ` Rob Herring
2025-04-29 10:11     ` Parvathi Pudi
2025-05-02 20:08   ` ALOK TIWARI
2025-04-23  6:06 ` [PATCH net-next v6 02/11] net: ti: prueth: Adds ICSSM Ethernet driver Parvathi Pudi
2025-04-23  6:06 ` [PATCH net-next v6 03/11] net: ti: prueth: Adds PRUETH HW and SW configuration Parvathi Pudi
2025-04-23  7:23 ` [PATCH net-next v6 04/11] net: ti: prueth: Adds link detection, RX and TX support Parvathi Pudi
2025-04-25  2:13   ` Jakub Kicinski
2025-04-29 10:03     ` Parvathi Pudi
2025-05-03  9:01   ` ALOK TIWARI
2025-04-23  7:23 ` [PATCH net-next v6 05/11] net: ti: prueth: Adds ethtool support for ICSSM PRUETH Driver Parvathi Pudi
2025-04-25  2:17   ` Jakub Kicinski
2025-04-29 10:06     ` Parvathi Pudi
2025-05-03  9:29   ` ALOK TIWARI [this message]
2025-04-23  7:23 ` [PATCH net-next v6 06/11] net: ti: prueth: Adds HW timestamping support for PTP using PRU-ICSS IEP module Parvathi Pudi
2025-04-25  2:16   ` Jakub Kicinski
2025-04-29 10:04     ` Parvathi Pudi
2025-04-23  7:23 ` [PATCH net-next v6 07/11] net: ti: prueth: Adds support for network filters for traffic control supported by PRU-ICSS Parvathi Pudi
2025-05-03  9:26   ` ALOK TIWARI
2025-05-05 13:34     ` Parvathi Pudi
2025-04-23  9:06 ` [PATCH net-next v6 08/11] net: ti: prueth: Adds support for RX interrupt coalescing/pacing Parvathi Pudi
2025-04-23  9:06 ` [PATCH net-next v6 09/11] net: ti: prueth: Adds power management support for PRU-ICSS Parvathi Pudi
2025-04-23  9:06 ` [PATCH net-next v6 10/11] net: ti: prueth: Adds support for PRUETH on AM33x and AM43x SOCs Parvathi Pudi
2025-04-23  9:06 ` [PATCH net-next v6 11/11] net: ti: prueth: Adds PTP OC Support for AM335x and AM437x Parvathi Pudi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=868c8163-d776-4ff4-b516-3046c5db0fc0@oracle.com \
    --to=alok.a.tiwari@oracle.com \
    --cc=afd@ti.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=basharath@couthit.com \
    --cc=conor+dt@kernel.org \
    --cc=danishanwar@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=diogo.ivo@siemens.com \
    --cc=edumazet@google.com \
    --cc=glaroque@baylibre.com \
    --cc=horms@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=javier.carrasco.cruz@gmail.com \
    --cc=krishna@couthit.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=m-malladi@ti.com \
    --cc=mohan@couthit.com \
    --cc=netdev@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pabeni@redhat.com \
    --cc=parvathi@couthit.com \
    --cc=pmohan@couthit.com \
    --cc=prajith@ti.com \
    --cc=praneeth@ti.com \
    --cc=pratheesh@ti.com \
    --cc=rdunlap@infradead.org \
    --cc=richardcochran@gmail.com \
    --cc=robh@kernel.org \
    --cc=rogerq@kernel.org \
    --cc=rogerq@ti.com \
    --cc=s-anna@ti.com \
    --cc=s.hauer@pengutronix.de \
    --cc=schnelle@linux.ibm.com \
    --cc=srk@ti.com \
    --cc=ssantosh@kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®