Re: [PATCH 05/14] thermal: exynos: remove parsing of samsung,tmu_default_temp_offset property

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 16/04/2018 12:11, Bartlomiej Zolnierkiewicz wrote:
> Trimming (one point based or two points based) is always used for
> the temperature calibration and the default non-trimming code is
> never reached. Remove it and then remove no longer needed parsing
> of samsung,tmu_default_temp_offset property.
> 
> There should be no functional changes caused by this patch.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> ---

Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This one was easy :)


>  drivers/thermal/samsung/exynos_tmu.c | 48 ++++++++++--------------------------
>  drivers/thermal/samsung/exynos_tmu.h |  2 --
>  2 files changed, 13 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index d7a3c3c..958a7c4 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -249,24 +249,14 @@ static void exynos_report_trigger(struct exynos_tmu_data *p)
>  static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
>  {
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
> -	int temp_code;
> -
> -	switch (pdata->cal_type) {
> -	case TYPE_TWO_POINT_TRIMMING:
> -		temp_code = (temp - pdata->first_point_trim) *
> -			(data->temp_error2 - data->temp_error1) /
> -			(pdata->second_point_trim - pdata->first_point_trim) +
> -			data->temp_error1;
> -		break;
> -	case TYPE_ONE_POINT_TRIMMING:
> -		temp_code = temp + data->temp_error1 - pdata->first_point_trim;
> -		break;
> -	default:
> -		temp_code = temp + pdata->default_temp_offset;
> -		break;
> -	}
>  
> -	return temp_code;
> +	if (pdata->cal_type == TYPE_ONE_POINT_TRIMMING)
> +		return temp + data->temp_error1 - pdata->first_point_trim;
> +
> +	return (temp - pdata->first_point_trim) *
> +		(data->temp_error2 - data->temp_error1) /
> +		(pdata->second_point_trim - pdata->first_point_trim) +
> +		data->temp_error1;
>  }
>  
>  /*
> @@ -276,24 +266,14 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp)
>  static int code_to_temp(struct exynos_tmu_data *data, u16 temp_code)
>  {
>  	struct exynos_tmu_platform_data *pdata = data->pdata;
> -	int temp;
>  
> -	switch (pdata->cal_type) {
> -	case TYPE_TWO_POINT_TRIMMING:
> -		temp = (temp_code - data->temp_error1) *
> -			(pdata->second_point_trim - pdata->first_point_trim) /
> -			(data->temp_error2 - data->temp_error1) +
> -			pdata->first_point_trim;
> -		break;
> -	case TYPE_ONE_POINT_TRIMMING:
> -		temp = temp_code - data->temp_error1 + pdata->first_point_trim;
> -		break;
> -	default:
> -		temp = temp_code - pdata->default_temp_offset;
> -		break;
> -	}
> +	if (pdata->cal_type == TYPE_ONE_POINT_TRIMMING)
> +		return temp_code - data->temp_error1 + pdata->first_point_trim;
>  
> -	return temp;
> +	return (temp_code - data->temp_error1) *
> +		(pdata->second_point_trim - pdata->first_point_trim) /
> +		(data->temp_error2 - data->temp_error1) +
> +		pdata->first_point_trim;
>  }
>  
>  static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
> @@ -1166,8 +1146,6 @@ static int exynos_of_sensor_conf(struct device_node *np,
>  	pdata->first_point_trim = (u8)value;
>  	of_property_read_u32(np, "samsung,tmu_second_point_trim", &value);
>  	pdata->second_point_trim = (u8)value;
> -	of_property_read_u32(np, "samsung,tmu_default_temp_offset", &value);
> -	pdata->default_temp_offset = (u8)value;
>  
>  	of_property_read_u32(np, "samsung,tmu_cal_type", &pdata->cal_type);
>  
> diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
> index 8c468b6..a7e81b4 100644
> --- a/drivers/thermal/samsung/exynos_tmu.h
> +++ b/drivers/thermal/samsung/exynos_tmu.h
> @@ -50,7 +50,6 @@ enum soc_type {
>   * @efuse_value: platform defined fuse value
>   * @min_efuse_value: minimum valid trimming data
>   * @max_efuse_value: maximum valid trimming data
> - * @default_temp_offset: default temperature offset in case of no trimming
>   * @cal_type: calibration type for temperature
>   *
>   * This structure is required for configuration of exynos_tmu driver.
> @@ -65,7 +64,6 @@ struct exynos_tmu_platform_data {
>  	u32 max_efuse_value;
>  	u8 first_point_trim;
>  	u8 second_point_trim;
> -	u8 default_temp_offset;
>  
>  	u32 cal_type;
>  };
> 


-- 
 <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog