Re: [PATCH net-next v2] wireless-drivers: rtnetlink wifi simulation device

[Kalle Valo <kvalo@codeaurora.org>]

Cody Schuffelen <schuffelen@google.com> writes:

> This device takes over an existing network device and produces a
> new one that appears like a wireless connection, returning enough canned
> responses to nl80211 to satisfy a standard network manager. If
> necessary, it can also be set up one step removed from an existing
> network device, such as through a vlan/80211Q or macvlan connection to
> not disrupt the existing network interface.
>
> To use it to wrap a bare ethernet connection:
>
> ip link set eth0 down
> ip link set eth0 name buried_eth0
> ip link set buried_eth0 up
> ip link add link buried_eth0 name wlan0 type virt_wifi
>
> eth0 is renamed to buried_eth0 to avoid a network manager trying to
> manage it, as the original network link will become unusuable and only
> the wireless wrapper will be functional. This can also be combined with
> vlan or macvlan links on top of eth0 to share the network between
> distinct links, but that requires support outside the machine for
> accepting vlan-tagged packets or packets from multiple MAC addresses.
>
> This is being used for Google's Remote Android Virtual Device project,
> which runs Android devices in virtual machines. The standard network
> interfaces provided inside the virtual machines are all ethernet.
> However, Android is not interested in ethernet devices and would rather
> connect to a wireless interface. This patch allows the virtual machine
> guest to treat one of its network connections as wireless rather than
> ethernet, satisfying Android's network connection requirements.
>
> We believe this is a generally useful driver for simulating wireless
> network connections in other environments where a wireless connection is
> desired by some userspace process but is not available. Future work can
> also include exporting the wireless control plane to userspace, so the
> device can configure the behavior of the simulated wireless network
> itself.
>
> This is distinct from other testing efforts such as mac80211_hwsim by
> being a cfg80211 device instead of mac80211 device, allowing straight
> pass-through on the data plane instead of forcing packaging of ethernet
> data into mac80211 frames.
>
> Signed-off-by: A. Cody Schuffelen <schuffelen@google.com>
> Acked-by: Alistair Strachan <astrachan@google.com>
> Acked-by: Greg Hartman <ghartman@google.com>
> Signed-off-by: Cody Schuffelen <schuffelen@google.com>

[...]

> --- a/drivers/net/wireless/Kconfig
> +++ b/drivers/net/wireless/Kconfig
> @@ -114,4 +114,11 @@ config USB_NET_RNDIS_WLAN
>  
>  	  If you choose to build a module, it'll be called rndis_wlan.
>  
> +config VIRT_WIFI
> +	tristate "Wifi wrapper for ethernet drivers"
> +	default n

Isn't 'n' the default so you don't need to explicitly set that?

-- 
Kalle Valo