mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Cen Zhang <zzzccc427@gmail.com>
Cc: perex@perex.cz, tiwai@suse.com, linux-sound@vger.kernel.org,
	linux-kernel@vger.kernel.org, baijiaju1990@gmail.com,
	jjzuming@gmail.com
Subject: Re: [PATCH] ALSA: opl3: Stop delayed note-offs before freeing the channel set
Date: Tue, 20 Oct 2026 12:33:51 +0200	[thread overview]
Message-ID: <874iegiru8.wl-tiwai@suse.de> (raw)
In-Reply-To: <pm-pmb-4552c4e605507d8d9b16-v4-213af356c0046331c8ff@gmail.com>

On Mon, 19 Oct 2026 12:15:12 +0200,
Cen Zhang wrote:
> 
> An in-tree OPL3 device accepts FM instruments through its hwdep write
> interface. Loading a bank-127 instrument with nonzero fix_dur and sending
> a direct NOTEON without a subscription leaves the device in its initial
> SYNTH mode. snd_opl3_note_on() sets the note_off deadline, starts tlist
> at the next jiffy and stores the channel pointer in a voice.
> 
> Unbinding the OPL3 sequencer device can then free the port's channel set
> while the card-owned OPL3 object and its timer remain alive. Port removal
> drains event_input users, but the timer is independent. Without a
> subscription, no unuse callback runs to perform its timer cleanup:
> 
>   NOTEON / sequencer-device unbind      Delayed-note timer
>   -------------------------------      ------------------
>   snd_opl3_note_on()
>     lock(voice_lock)
>     set voice->note_off deadline
>     snd_opl3_start_timer()
>       mod_timer(tlist, jiffies + 1)
>     voice->note_off_check = 1
>     voice->chan = channel
>     unlock(voice_lock)
>   NOTEON returns
>   sysfs driver unbind
>     snd_opl3_seq_remove()
>       snd_seq_delete_kernel_client()
>         port_free(): drain input
>           snd_opl3_synth_free_port()
>             free opl3->chset
>                                        snd_opl3_timer_func()
>                                          lock(voice_lock)
>                                          note_off == jiffies
>                                          snd_opl3_note_off_unsafe()
>                                            read voice->chan->number
> 
> The timer can thus read a channel from the freed set. Shut it down
> synchronously before freeing chset, outside voice_lock and
> sys_timer_lock, which the callback needs. Shutdown also prevents a
> callback from rearming the timer during teardown. Clear the delayed-note
> flags under voice_lock so the timer reinitialization on rebind cannot
> revive old channel accesses.
> 
> Assisted-by: LLM
> Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
> 
> ---
> 
> diff --git a/sound/drivers/opl3/opl3_seq.c b/sound/drivers/opl3/opl3_seq.c
> index b77d8e8f12fb9f90ac72b9209f4f59373eadf6f4..86bf2680a3b5e2ffee73b59a9056f93fb2bec891 100644
> --- a/sound/drivers/opl3/opl3_seq.c
> +++ b/sound/drivers/opl3/opl3_seq.c
> @@ -151,7 +151,14 @@ static int snd_opl3_synth_event_input(struct snd_seq_event * ev, int direct,
>  static void snd_opl3_synth_free_port(void *private_data)
>  {
>  	struct snd_opl3 *opl3 = private_data;
> +	int i;
>  
> +	timer_shutdown_sync(&opl3->tlist);
> +	/* Discard delayed notes before reusing the timer on rebind. */
> +	scoped_guard(spinlock_irqsave, &opl3->voice_lock) {
> +		for (i = 0; i < MAX_OPL3_VOICES; i++)
> +			opl3->voices[i].note_off_check = 0;
> +	}
>  	snd_midi_channel_free_set(opl3->chset);
>  }
>  

Some issues have been reported by Sashiko.  Could you check them?
  https://sashiko.dev/#/patchset/pm-pmb-4552c4e605507d8d9b16-v4-213af356c0046331c8ff%40gmail.com


thanks,

Takashi

      reply	other threads:[~2026-10-20 10:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-19 10:15 Cen Zhang
2026-10-20 10:33 ` Takashi Iwai [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=874iegiru8.wl-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=baijiaju1990@gmail.com \
    --cc=jjzuming@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=zzzccc427@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®