From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Nicolo Giuliani via B4 Relay
<devnull+nicolo.giuliani6.studio.unibo.it@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Nicolo Giuliani <nicolo.giuliani6@studio.unibo.it>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v2 0/3] arm64: dts: marvell: Add Sophos XGS 107w NPU
Date: Wed, 30 Sep 2026 21:52:58 +0200 [thread overview]
Message-ID: <874if68qjp.fsf@BLaptop.bootlin.com> (raw)
In-Reply-To: <20260921-send-dt-v2-0-fb6b81002ad7@studio.unibo.it>
Nicolo Giuliani via B4 Relay
<devnull+nicolo.giuliani6.studio.unibo.it@kernel.org> writes:
> The Sophos XGS 87/107 desktop firewalls pair an AMD x86 host with a
> separate network processing unit (NPU): a Marvell Armada CN9130 SoC with
> its own eMMC and SPI NOR flash. The NPU serves the eight RJ45 ports and
> the SFP cage through a Marvell 88E6193X switch on its MDIO bus, which is
> connected to the SoC by a 10GBASE-R link, and reaches the x86 host over
> PCIe.
>
> This series adds the Sophos vendor prefix, the compatible string of the
> NPU board and a device tree that describes the NPU as a standalone system:
> UART console, eMMC, SPI NOR flash, the SFP cage and the switch with its
> ports. The port LEDs, the USB ports and the PCIe link to the x86 host (the
> CN9130 acts as a PCIe endpoint towards it, which needs endpoint support
> that is not part of this series) are not described.
>
> Tested on an XGS 107w with Linux 6.18: boot from eMMC, eMMC and SPI NOR
> access, the mvpp2 link to the switch at 10 Gb/s, the 88E6193X probing with
> its eight user ports, and 936 Mbit/s through a front port. The SFP cage
> is untested.
>
> dt_binding_check passes for vendor-prefixes.yaml and armada-7k-8k.yaml,
> and CHECK_DTBS=y on marvell/cn9130-sophos-xgs107w.dtb reports no warning
> specific to this board.
>
> Based on the mvebu/dt branch of the mvebu tree (008e9faade).
>
> Signed-off-by: Nicolo Giuliani <nicolo.giuliani6@studio.unibo.it>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> Changes in v2:
> - Patch 1: drop the second sentence of the commit message, add Acked-by
> - Patch 2: move the entry before the SolidRun ones and list only
> marvell,cn9130 after the board compatible, as the other CN9130 boards do
> - Patch 3: use the compatible list of patch 2; pass the switch reset as
> reset-gpios and drop the boot loader workaround; remove the LED
> expander node and the SFP address comment
> - Link to v1: https://patch.msgid.link/20260919-send-dt-v1-0-365615a74ef3@studio.unibo.it
>
> ---
> Nicolo Giuliani (3):
> dt-bindings: vendor-prefixes: Add Sophos
> dt-bindings: arm: marvell: Add Sophos XGS 107w NPU
> arm64: dts: marvell: Add Sophos XGS 107w NPU board
>
> .../bindings/arm/marvell/armada-7k-8k.yaml | 7 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm64/boot/dts/marvell/Makefile | 1 +
> .../boot/dts/marvell/cn9130-sophos-xgs107w.dts | 188 +++++++++++++++++++++
> 4 files changed, 198 insertions(+)
> ---
> base-commit: 008e9faadef8c0aaa9b8a3ff05a2126e3c5b08b7
> change-id: 20260919-send-dt-6bbd08a470d2
>
> Best regards,
> --
> Nicolo Giuliani <nicolo.giuliani6@studio.unibo.it>
>
>
--
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
prev parent reply other threads:[~2026-09-30 19:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 0:26 Nicolo Giuliani via B4 Relay
2026-09-21 0:26 ` [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add Sophos Nicolo Giuliani via B4 Relay
2026-09-21 0:26 ` [PATCH v2 2/3] dt-bindings: arm: marvell: Add Sophos XGS 107w NPU Nicolo Giuliani via B4 Relay
2026-09-24 13:15 ` Krzysztof Kozlowski
2026-09-21 0:26 ` [PATCH v2 3/3] arm64: dts: marvell: Add Sophos XGS 107w NPU board Nicolo Giuliani via B4 Relay
2026-09-22 12:08 ` Andrew Lunn
2026-09-30 8:35 ` R: [PATCH v2 0/3] arm64: dts: marvell: Add Sophos XGS 107w NPU Nicolò Giuliani - nicolo.giuliani6@studio.unibo.it
2026-09-30 8:53 ` Gregory Clement
2026-09-30 19:52 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874if68qjp.fsf@BLaptop.bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=devnull+nicolo.giuliani6.studio.unibo.it@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolo.giuliani6@studio.unibo.it \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®