Re: musb: am3358: having problem with high-speed on usb1 at peripheral

[Felipe Balbi <felipe.balbi@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1187 bytes --]


Hi,

ayaka <ayaka@soulik.info> writes:
> On 08/13/2016 01:44 AM, Greg KH wrote:
>> On Sat, Aug 13, 2016 at 12:38:46AM +0800, ayaka wrote:
>>>
>>> On 08/12/2016 03:40 PM, Greg KH wrote:
>>>> On Fri, Aug 12, 2016 at 10:23:15AM +0800, ayaka wrote:
>>>>> Hello all:
>>>>>     I recently add a support for customize am3358 board using the branch
>>>>> processor-sdk-linux-03.00.00 from Ti git. But I meet a problem with musb
>>>>> at the peripheral mode.
>>>> Then you are going to have to get support from TI for this, nothing we
>>>> can do here about random vendor kernel trees, sorry.
>>>>
>>>> If you can use the 4.7 tree, or better yet, the 4.8-rc tree, then we
>>> I have tried the 4.8-rc1, I meet the same problem.
>> What problem is that exactly?
> Sorry, the USB1 can't work at high speed gadget mode and have DMA problem.
> musb-hdrc musb-hdrc.0.auto: Failed to request rx1.
> musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517

-517 is EPROBE_DEFER. Most likely DMA hasn't probed and MUSB is
 deferring to try later. This does _NOT_ MUSB can't work with
 DMA. Perhaps you didn't enable support for MUSB's DMA engine.

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]