From: Kevin Hilman <khilman@ti.com>
To: Carlos Chinea <carlos.chinea@nokia.com>
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Subject: Re: [RFC PATCHv5 2/7] HSI: omap_ssi: Introducing OMAP SSI driver
Date: Mon, 13 Jun 2011 13:21:59 -0700 [thread overview]
Message-ID: <874o3tmqhk.fsf@ti.com> (raw)
In-Reply-To: <1307713124-3946-3-git-send-email-carlos.chinea@nokia.com> (Carlos Chinea's message of "Fri, 10 Jun 2011 16:38:39 +0300")
Carlos Chinea <carlos.chinea@nokia.com> writes:
> Introduces the OMAP SSI driver in the kernel.
>
> The Synchronous Serial Interface (SSI) is a legacy version
> of HSI. As in the case of HSI, it is mainly used to connect
> Application engines (APE) with cellular modem engines (CMT)
> in cellular handsets.
>
> It provides a multichannel, full-duplex, multi-core communication
> with no reference clock. The OMAP SSI block is capable of reaching
> speeds of 110 Mbit/s.
>
> Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
> ---
> arch/arm/mach-omap2/ssi.c | 134 +++
> arch/arm/plat-omap/include/plat/ssi.h | 204 ++++
> drivers/hsi/controllers/omap_ssi.c | 1852 +++++++++++++++++++++++++++++++++
> 3 files changed, 2190 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-omap2/ssi.c
> create mode 100644 arch/arm/plat-omap/include/plat/ssi.h
> create mode 100644 drivers/hsi/controllers/omap_ssi.c
>
> diff --git a/arch/arm/mach-omap2/ssi.c b/arch/arm/mach-omap2/ssi.c
> new file mode 100644
> index 0000000..e822a77
> --- /dev/null
> +++ b/arch/arm/mach-omap2/ssi.c
> @@ -0,0 +1,134 @@
> +/*
> + * linux/arch/arm/mach-omap2/ssi.c
Minor: Please don't include filenames in the comments. Files tend to move
around and these comments don't get updated.
> + * Copyright (C) 2010 Nokia Corporation. All rights reserved.
> + *
> + * Contact: Carlos Chinea <carlos.chinea@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/platform_device.h>
> +#include <plat/omap-pm.h>
> +#include <plat/ssi.h>
> +
> +static struct omap_ssi_platform_data ssi_pdata = {
> + .num_ports = SSI_NUM_PORTS,
> + .get_dev_context_loss_count = omap_pm_get_dev_context_loss_count,
> +};
> +
> +static struct resource ssi_resources[] = {
> + /* SSI controller */
> + [0] = {
> + .start = 0x48058000,
> + .end = 0x48058fff,
> + .name = "omap_ssi_sys",
> + .flags = IORESOURCE_MEM,
> + },
> + /* GDD */
> + [1] = {
> + .start = 0x48059000,
> + .end = 0x48059fff,
> + .name = "omap_ssi_gdd",
> + .flags = IORESOURCE_MEM,
> + },
> + [2] = {
> + .start = 71,
> + .end = 71,
> + .name = "ssi_gdd",
> + .flags = IORESOURCE_IRQ,
> + },
> + /* SSI port 1 */
> + [3] = {
> + .start = 0x4805a000,
> + .end = 0x4805a7ff,
> + .name = "omap_ssi_sst1",
> + .flags = IORESOURCE_MEM,
> + },
> + [4] = {
> + .start = 0x4805a800,
> + .end = 0x4805afff,
> + .name = "omap_ssi_ssr1",
> + .flags = IORESOURCE_MEM,
> + },
> + [5] = {
> + .start = 67,
> + .end = 67,
> + .name = "ssi_p1_mpu_irq0",
> + .flags = IORESOURCE_IRQ,
> + },
> + [6] = {
> + .start = 68,
> + .end = 68,
> + .name = "ssi_p1_mpu_irq1",
> + .flags = IORESOURCE_IRQ,
> + },
> + [7] = {
> + .start = 0,
> + .end = 0,
> + .name = "ssi_p1_cawake",
> + .flags = IORESOURCE_IRQ | IORESOURCE_UNSET,
> + },
> +};
> +
> +static struct platform_device ssi_pdev = {
> + .name = "omap_ssi",
> + .id = 0,
> + .num_resources = ARRAY_SIZE(ssi_resources),
> + .resource = ssi_resources,
> + .dev = {
> + .platform_data = &ssi_pdata,
> + },
> +};
omap_hwmod has all the base address and IRQ data, will construct the
struct resources and the platform_devices for you. Please use
omap_hwmod + omap_device for this part of the code.
Kevin
next prev parent reply other threads:[~2011-06-13 20:22 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-10 13:38 [RFC PATCHv5 0/7] HSI framework and drivers Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 1/7] HSI: hsi: Introducing HSI framework Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 2/7] HSI: omap_ssi: Introducing OMAP SSI driver Carlos Chinea
2011-06-13 13:21 ` Tony Lindgren
2011-06-14 12:09 ` Carlos Chinea
2011-06-13 20:21 ` Kevin Hilman [this message]
2011-06-14 12:12 ` Carlos Chinea
2011-06-15 15:37 ` Kevin Hilman
2011-06-10 13:38 ` [RFC PATCHv5 3/7] HSI: omap_ssi: Add OMAP SSI to the kernel configuration Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 4/7] HSI: hsi_char: Add HSI char device driver Carlos Chinea
2011-06-22 19:37 ` Sjur Brændeland
2011-06-23 9:12 ` Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 5/7] HSI: hsi_char: Add HSI char device kernel configuration Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 6/7] HSI: Add HSI API documentation Carlos Chinea
2011-06-10 13:38 ` [RFC PATCHv5 7/7] HSI: hsi_char: Update ioctl-number.txt Carlos Chinea
2011-06-14 9:35 ` [RFC PATCHv5 0/7] HSI framework and drivers Alan Cox
2011-06-15 9:27 ` Andras Domokos
2011-06-22 19:11 ` [RFC PATCHv5 1/7] HSI: hsi: Introducing HSI framework Sjur Brændeland
2011-06-22 19:25 ` Linus Walleij
2011-06-23 13:08 ` Carlos Chinea
2011-06-28 13:05 ` Sjur BRENDELAND
2011-07-22 10:43 ` Carlos Chinea
2011-07-22 11:01 ` Felipe Balbi
2011-07-22 11:51 ` Carlos Chinea
2011-07-22 12:05 ` Felipe Balbi
2011-07-22 13:02 ` Carlos Chinea
2011-07-24 21:56 ` Sjur Brændeland
2011-07-25 9:17 ` Carlos Chinea
2011-10-20 12:57 ` [RFC PATCHv5 0/7] HSI framework and drivers Sebastian Reichel
2011-10-21 9:54 ` Linus Walleij
2011-10-21 10:28 ` Carlos Chinea
2011-10-21 12:19 ` Linus Walleij
2011-10-21 13:36 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874o3tmqhk.fsf@ti.com \
--to=khilman@ti.com \
--cc=carlos.chinea@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome