From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Matheus Alves de Almeida <matheus.aalmeida@inf.ufrgs.br>,
linux-fsdevel@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] fat: preallocate space before expanding in fat_cont_expand()
Date: Sun, 25 Oct 2026 04:27:04 +0900 [thread overview]
Message-ID: <875wyqdhmf.fsf@mail.parknet.co.jp> (raw)
In-Reply-To: <20261024013021.251898-1-matheus.aalmeida@inf.ufrgs.br>
Matheus Alves de Almeida <matheus.aalmeida@inf.ufrgs.br> writes:
> The fat_cont_expand() implementation leaves allocation of new clusters
> to generic_cont_expand_simple(). This path does many small cluster
> allocations, harming performance.
>
> Preallocate cluster space in fat_cont_expand(). Move preallocation to
> a new fat_preallocate() helper used by both fat_cont_expand() and
> fat_fallocate(FALLOC_FL_KEEP_SIZE). Use a FAT-specific
> fat_cont_expand_simple() instead of generic_cont_expand_simple() to
> avoid rechecking the new size after clusters have been allocated.
>
> Benchmarking was done under QEMU/KVM with a virtio-blk device using
> cache=none. Each result is the arithmetic mean of the listed samples.
>
> start = now_ns();
> for (unsigned i = 0; i < count; i++) {
> if (truncate_mode)
> ftruncate(fds[i], bytes);
> else
> fallocate(fds[i], 0, 0, bytes);
> }
> elapsed = now_ns() - start;
>
> 16 files, 512-byte clusters:
> length mode sync? before after improvement samples
> 256MiB ftruncate no 9.576s 5.345s 1.79x 10
> 256MiB fallocate no 9.634s 5.640s 1.71x 10
> 1MiB ftruncate yes 58.66s 0.362s 162.15x 5
> 1MiB fallocate yes 61.36s 0.390s 157.15x 5
>
> 128 files, 512-byte clusters:
> length mode sync? before after improvement samples
> 512KiB ftruncate no 0.433s 0.352s 1.23x 10
> 512KiB fallocate no 0.446s 0.393s 1.13x 10
> 64KiB ftruncate yes 31.32s 0.429s 73.00x 10
> 64KiB fallocate yes 29.59s 0.410s 72.42x 10
>
> 16 files, 4096-byte clusters:
> length mode sync? before after improvement samples
> 256MiB ftruncate no 5.181s 4.417s 1.17x 10
> 256MiB fallocate no 5.166s 4.442s 1.16x 10
> 1MiB ftruncate yes 9.294s 0.111s 84.06x 10
> 1MiB fallocate yes 8.710s 0.110s 79.36x 10
>
> The biggest improvement is on filesystems with a small cluster size and
> on synchronous mounts.
>
> Signed-off-by: Matheus Alves de Almeida <matheus.aalmeida@inf.ufrgs.br>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
> ---
> Changes in v2:
> - fat_cont_expand(): Hold truncate_lock around fat_truncate_blocks().
>
> Changes in v3:
> - Add a new fat_cont_expand_simple() helper that does the same as
> generic_cont_expand_simple() but without the inode_newsize_ok() check.
> - Use the new helper in fat_cont_expand() instead of
> generic_cont_expand_simple(), removing the now-unnecessary cleanup.
>
> This patch depends on:
> https://lore.kernel.org/linux-fsdevel/20261012171106.146243-1-matheus.aalmeida@inf.ufrgs.br/T/#t
>
> fs/fat/file.c | 70 +++++++++++++++++++++++++++++++++++++--------------
> 1 file changed, 51 insertions(+), 19 deletions(-)
>
> diff --git a/fs/fat/file.c b/fs/fat/file.c
> index 3aa541c6b127..a25531d9451e 100644
> --- a/fs/fat/file.c
> +++ b/fs/fat/file.c
> @@ -217,13 +217,62 @@ const struct file_operations fat_file_operations = {
> .setlease = generic_setlease,
> };
>
> +static int fat_preallocate(struct inode *inode, loff_t new_size)
> +{
> + int nr_cluster; /* Number of clusters to be allocated */
> + loff_t mm_bytes; /* Number of bytes to be allocated for file */
> + loff_t ondisksize; /* block aligned on-disk size in bytes*/
> + struct super_block *sb = inode->i_sb;
> + struct msdos_sb_info *sbi = MSDOS_SB(sb);
> +
> + ondisksize = inode->i_blocks << 9;
> + if (new_size <= ondisksize)
> + return 0;
> +
> + /* First compute the number of clusters to be allocated */
> + mm_bytes = new_size - ondisksize;
> + nr_cluster = (mm_bytes + (sbi->cluster_size - 1)) >>
> + sbi->cluster_bits;
> +
> + /* Allocate the clusters. We are not zeroing them out */
> + return fat_add_clusters(inode, nr_cluster);
> +}
> +
> +static int fat_cont_expand_simple(struct inode *inode, loff_t size)
> +{
> + struct address_space *mapping = inode->i_mapping;
> + const struct address_space_operations *aops = mapping->a_ops;
> + struct folio *folio;
> + void *fsdata = NULL;
> + int err;
> +
> + err = aops->write_begin(NULL, mapping, size, 0, &folio, &fsdata);
> + if (err)
> + goto out;
> +
> + err = aops->write_end(NULL, mapping, size, 0, 0, folio, fsdata);
> +
> +out:
> + return err;
> +}
> +
> static int fat_cont_expand(struct inode *inode, loff_t size)
> {
> struct address_space *mapping = inode->i_mapping;
> loff_t start = inode->i_size, count = size - inode->i_size;
> int err;
>
> - err = generic_cont_expand_simple(inode, size);
> + /*
> + * Preallocating space here is more efficient than during
> + * fat_cont_expand_simple() because of batching.
> + */
> + err = inode_newsize_ok(inode, size);
> + if (err)
> + goto out;
> + err = fat_preallocate(inode, size);
> + if (err)
> + goto out;
> + err = fat_cont_expand_simple(inode, size);
> if (err)
> goto out;
>
> @@ -263,12 +312,7 @@ static int fat_cont_expand(struct inode *inode, loff_t size)
> static long fat_fallocate(struct file *file, int mode,
> loff_t offset, loff_t len)
> {
> - int nr_cluster; /* Number of clusters to be allocated */
> - loff_t mm_bytes; /* Number of bytes to be allocated for file */
> - loff_t ondisksize; /* block aligned on-disk size in bytes*/
> struct inode *inode = file->f_mapping->host;
> - struct super_block *sb = inode->i_sb;
> - struct msdos_sb_info *sbi = MSDOS_SB(sb);
> int err = 0;
>
> /* No support for hole punch or other fallocate flags. */
> @@ -281,19 +325,7 @@ static long fat_fallocate(struct file *file, int mode,
>
> inode_lock(inode);
> if (mode & FALLOC_FL_KEEP_SIZE) {
> - ondisksize = inode->i_blocks << 9;
> - if ((offset + len) <= ondisksize)
> - goto error;
> -
> - /* First compute the number of clusters to be allocated */
> - mm_bytes = offset + len - ondisksize;
> - nr_cluster = (mm_bytes + (sbi->cluster_size - 1)) >>
> - sbi->cluster_bits;
> -
> - /* Allocate the clusters. We are not zeroing them out */
> - err = fat_add_clusters(inode, nr_cluster);
> - if (err)
> - goto error;
> + err = fat_preallocate(inode, offset + len);
> } else {
> if ((offset + len) <= i_size_read(inode))
> goto error;
--
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
prev parent reply other threads:[~2026-10-24 19:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-24 1:30 Matheus Alves de Almeida
2026-10-24 19:27 ` OGAWA Hirofumi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=875wyqdhmf.fsf@mail.parknet.co.jp \
--to=hirofumi@mail.parknet.co.jp \
--cc=akpm@linux-foundation.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matheus.aalmeida@inf.ufrgs.br \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®