mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: Eduardo Valentin <edubezval@gmail.com>, Zhang Rui <rui.zhang@intel.com>
Cc: Linux-Renesas <linux-renesas-soc@vger.kernel.org>,
	Wolfram Sang <wsa@the-dreams.de>, Simon <horms@verge.net.au>,
	Magnus <magnus.damm@gmail.com>,
	Linux-Kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/4][RESEND] thermal: rcar: enable to use thermal-zone on DT
Date: Thu, 28 Jan 2016 02:45:08 +0000	[thread overview]
Message-ID: <877fiu2zos.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <878u3a2zqt.wl%kuninori.morimoto.gx@renesas.com>


From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enables to use thermal-zone on DT if it was calles as
"renesas,rcar-thermal-gen2".
Previous style (= non thermal-zone) is still supported by
"renesas,rcar-thermal" to keep compatibility for "git bisect".

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 .../devicetree/bindings/thermal/rcar-thermal.txt   | 37 +++++++++++++++++-
 drivers/thermal/rcar_thermal.c                     | 45 +++++++++++++++++++---
 2 files changed, 75 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625..e5ee3f1 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 44b9c48..0e735ac 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/reboot.h>
@@ -75,8 +76,10 @@ struct rcar_thermal_priv {
 #define rcar_has_irq_support(priv)	((priv)->common->base)
 #define rcar_id_to_shift(priv)		((priv)->id * 8)
 
+#define USE_OF_THERMAL	1
 static const struct of_device_id rcar_thermal_dt_ids[] = {
 	{ .compatible = "renesas,rcar-thermal", },
+	{ .compatible = "renesas,rcar-gen2-thermal", .data = (void *)USE_OF_THERMAL },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids);
@@ -200,9 +203,9 @@ err_out_unlock:
 	return ret;
 }
 
-static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv,
+					 int *temp)
 {
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
 	int tmp;
 	int ret;
 
@@ -226,6 +229,20 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	return 0;
 }
 
+static int rcar_thermal_of_get_temp(void *data, int *temp)
+{
+	struct rcar_thermal_priv *priv = data;
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
+static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
+{
+	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
+
+	return rcar_thermal_get_current_temp(priv, temp);
+}
+
 static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
 				      int trip, enum thermal_trip_type *type)
 {
@@ -282,6 +299,10 @@ static int rcar_thermal_notify(struct thermal_zone_device *zone,
 	return 0;
 }
 
+static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = {
+	.get_temp	= rcar_thermal_of_get_temp,
+};
+
 static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
 	.get_temp	= rcar_thermal_get_temp,
 	.get_trip_type	= rcar_thermal_get_trip_type,
@@ -318,14 +339,20 @@ static void rcar_thermal_work(struct work_struct *work)
 
 	priv = container_of(work, struct rcar_thermal_priv, work.work);
 
-	rcar_thermal_get_temp(priv->zone, &cctemp);
+	ret = rcar_thermal_get_current_temp(priv, &cctemp);
+	if (ret < 0)
+		return;
+
 	ret = rcar_thermal_update_temp(priv);
 	if (ret < 0)
 		return;
 
 	rcar_thermal_irq_enable(priv);
 
-	rcar_thermal_get_temp(priv->zone, &nctemp);
+	ret = rcar_thermal_get_current_temp(priv, &nctemp);
+	if (ret < 0)
+		return;
+
 	if (nctemp != cctemp)
 		thermal_zone_device_update(priv->zone);
 }
@@ -403,6 +430,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
 	struct resource *res, *irq;
+	const struct of_device_id *of_id = of_match_device(rcar_thermal_dt_ids, dev);
+	unsigned long of_data = (unsigned long)of_id->data;
 	int mres = 0;
 	int i;
 	int ret = -ENODEV;
@@ -463,7 +492,13 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		priv->zone = thermal_zone_device_register("rcar_thermal",
+		if (of_data == USE_OF_THERMAL)
+			priv->zone = thermal_zone_of_sensor_register(
+						dev, i, priv,
+						&rcar_thermal_zone_of_ops);
+		else
+			priv->zone = thermal_zone_device_register(
+						"rcar_thermal",
 						1, 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
-- 
1.9.1

  reply	other threads:[~2016-01-28  2:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-28  2:43 [PATCH 0/4][RESEND] thermal: rcar: " Kuninori Morimoto
2016-01-28  2:45 ` Kuninori Morimoto [this message]
2016-01-28  2:45 ` [PATCH 2/4][RESEND] ARM: shmobile: r8a7790: enable to use thermal-zone Kuninori Morimoto
2016-01-28  2:46 ` [PATCH 3/4][RESEND] ARM: shmobile: r8a7791: " Kuninori Morimoto
2016-01-28  2:46 ` [PATCH 4/4][RESEND] ARM: shmobile: r8a7793: " Kuninori Morimoto
2016-02-09  1:56 ` [PATCH 0/4][RESEND] thermal: rcar: use thermal-zone on DT Kuninori Morimoto
2016-02-09 21:33   ` Eduardo Valentin
2016-02-09 22:05     ` Eduardo Valentin
2016-02-10  0:34       ` Kuninori Morimoto
2016-02-16  1:50         ` Simon Horman
2016-02-09 22:06 ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=877fiu2zos.wl%kuninori.morimoto.gx@renesas.com \
    --to=kuninori.morimoto.gx@renesas.com \
    --cc=edubezval@gmail.com \
    --cc=horms@verge.net.au \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=rui.zhang@intel.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®