From: jouni.hogander@nokia.com (Högander Jouni)
To: ext Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: "Valentin Eduardo \(Nokia-D\/Helsinki\)"
<eduardo.valentin@nokia.com>,
"De-Schrijver Peter \(Nokia-D\/Helsinki\)"
<Peter.De-Schrijver@nokia.com>,
"Keski-Saari Juha.1 \(EXT-Teleca\/Helsinki\)"
<ext-juha.1.keski-saari@nokia.com>,
LKML <linux-kernel@vger.kernel.org>,
"lrg\@slimlogic.co.uk" <lrg@slimlogic.co.uk>
Subject: Re: Doubt about Regulator Framework and VBAT use case
Date: Wed, 02 Dec 2009 15:55:14 +0200 [thread overview]
Message-ID: <877ht5jxa5.fsf@trdhcp146196.ntc.nokia.com> (raw)
In-Reply-To: <20091202120240.GA19094@sirena.org.uk> (ext Mark Brown's message of "Wed\, 2 Dec 2009 13\:02\:41 +0100")
ext Mark Brown <broonie@opensource.wolfsonmicro.com> writes:
> On Wed, Dec 02, 2009 at 01:32:06PM +0200, H??gander Jouni wrote:
>> ext Mark Brown <broonie@opensource.wolfsonmicro.com> writes:
>
>> > I'd add it as a fixed voltage regulator and either not specify the
>> > voltage or specify the nominal voltage.
>
>> I was preparing patch for this when I noticed that fixed voltage
>> regulator can control only one regulator. Are you aware of any ongoing
>> work to enable control for multiple regulators in
>> fixed-voltage-regulator?
>
> It's just a platform device configured with platform data, you can
> instantiate as many fixed voltage regulators in your system as you care
> to using the current driver.
Yes, you are right. This was just my mistake in usage of the
driver. Thanks for the clarification.
--
Jouni Högander
prev parent reply other threads:[~2009-12-02 13:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-30 10:41 Eduardo Valentin
2009-11-30 10:43 ` Eduardo Valentin
2009-11-30 11:45 ` Mark Brown
2009-12-02 11:32 ` Högander Jouni
2009-12-02 12:02 ` Mark Brown
2009-12-02 13:55 ` Högander Jouni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877ht5jxa5.fsf@trdhcp146196.ntc.nokia.com \
--to=jouni.hogander@nokia.com \
--cc=Peter.De-Schrijver@nokia.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=eduardo.valentin@nokia.com \
--cc=ext-juha.1.keski-saari@nokia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®