From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268521AbUHLL6Y (ORCPT ); Thu, 12 Aug 2004 07:58:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268518AbUHLL6X (ORCPT ); Thu, 12 Aug 2004 07:58:23 -0400 Received: from proxy.quengel.org ([213.146.113.159]:1920 "EHLO gerlin1.quengel.org") by vger.kernel.org with ESMTP id S268521AbUHLL4w (ORCPT ); Thu, 12 Aug 2004 07:56:52 -0400 To: lkml Subject: Re: rc4-mm1 pci-routing References: <200408111642.59938.bjorn.helgaas@hp.com> From: Ralf Gerbig In-Reply-To: <200408111642.59938.bjorn.helgaas@hp.com> (Bjorn Helgaas's message of "Wed, 11 Aug 2004 16:42:59 -0600") User-Agent: Gnus/5.1006 (Gnus v5.10.6) XEmacs/21.4 (Security Through Obscurity, linux) Date: Thu, 12 Aug 2004 13:56:49 +0200 Message-ID: <877js47eny.fsf-news@hsp-law.de> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org * On Wed, 11 Aug 2004 16:42:59 -0600, Bjorn Helgaas said: > Hi Ralf, > Thanks very much for your report. It looks like this device is the problem: > 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) > and it should get IRQ 21: > ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 > ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 > The driver for this should be intel8x0.o, and it looks like you are > loading it as a module. Could you build it in statically to the kernel > and collect the complete dmesg from a boot with "pci=routeirq" (one > from the boot that hangs would be nice as well, but that is a pain to > collect unless you're using a serial console)? > The usual problem is that a driver looks at pci_dev->irq before calling > pci_enable_device(), but intel8x0.c seems to be doing the right thing > in this regard. Hi Bjorn, [ your MTU still does not like me ;) ] this is with intel8x0 compiled in and routeirq. The serial console will have to wait until tomorrow, maybe tonight. Linux version 2.6.8-rc4-mm1-dvb (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #2 Thu Aug 12 11:25:16 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f74e0 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7e00 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/hde2 pci=routeirq PID hash table entries: 2048 (order 11: 16384 bytes) Detected 2091.607 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515004k/524224k available (2116k kernel code, 8708k reserved, 1170k data, 164k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4145.15 BogoMIPS (lpj=2072576) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2800+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................................................................................................................................................................... Table [DSDT](id F004) - 806 Objects with 77 Devices 275 Methods 36 Regions ACPI Namespace successfully loaded at root c048e9dc evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0980 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs at 0000000000004020 on int 0x9 evgpeblk-0989 [06] ev_create_gpe_block : Found 9 Wake, Enabled 1 Runtime GPEs in this block evgpeblk-0980 [06] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs at 00000000000044A0 on int 0x9 evgpeblk-0989 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.............................................................................................. Initialized 36/36 Regions 9/9 Fields 31/31 Buffers 18/26 Packages (815 nodes) Executing all Device _STA and_INI methods:................................................................................. 81 Devices found containing: 81 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf30 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf60, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** Routing PCI interrupts for all devices because "pci=routeirq" ** was specified. If this was required to make a driver work, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, high) -> IRQ 23 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 18 (level, high) -> IRQ 18 ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 18 (level, high) -> IRQ 18 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 19 (level, high) -> IRQ 19 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, high) -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 19 (level, high) -> IRQ 19 ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 16 (level, high) -> IRQ 16 ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 17 (level, high) -> IRQ 17 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 vesafb: probe of vesafb0 failed with error -6 Machine check exception polling timer started. cpufreq: Detected nForce2 chipset revision C1 cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss. cpufreq: FSB currently at 167 MHz, FID 12.5 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (61 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 4D040H2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: Maxtor 2B020H1, ATA DISK drive hdd: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 PDC20268: IDE controller at PCI slot 0000:01:09.0 ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17 PDC20268: chipset revision 2 PDC20268: 100% native mode on irq 17 ide2: BM-DMA at 0x9800-0x9807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x9808-0x980f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: SAMSUNG SV4002H, ATA DISK drive ide2 at 0x8800-0x8807,0x8c02 on irq 17 Probing IDE interface ide3... hdg: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive ide3 at 0x9000-0x9007,0x9402 on irq 17 Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hdc: max request size: 128KiB hdc: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) hdc: cache flushes not supported hdc: hdc1 hdc2 hdc3 hdc4 hde: max request size: 128KiB hde: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100) hde: cache flushes supported hde: hde1 hde2 libata version 1.02 loaded. sata_sil version 0.54 ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 16 (level, high) -> IRQ 16 ata1: SATA max UDMA/100 cmd 0xE0802080 ctl 0xE080208A bmdma 0xE0802000 irq 16 ata2: SATA max UDMA/100 cmd 0xE08020C0 ctl 0xE08020CA bmdma 0xE0802008 irq 16 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff ata1: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c68 86:3e01 87:4003 88:20ff ata2: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 input: PC Speaker Advanced Linux Sound Architecture Driver Version 1.0.5 (Sun May 30 10:49:40 2004 UTC). ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 18 (level, high) -> IRQ 18 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49562 usecs intel8x0: clocking to 47422 ALSA device list: #0: Brooktree Bt878 at 0xe4001000, irq 18 #1: NVidia nForce2 at 0xe7000000, irq 21 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) ACPI wakeup devices: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 164k freed kjournald starting. Commit interval 5 seconds EXT3 FS on hde2, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hdc4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb4, internal journal EXT3-fs: mounted filesystem with ordered data mode. subfs 0.9 Adding 307400k swap on /dev/hda6. Priority:42 extents:1 Adding 133552k swap on /dev/hdc2. Priority:42 extents:1 Adding 313228k swap on /dev/hde1. Priority:42 extents:1 Generic RTC Driver v1.07 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.28. ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 01695:1000 bound to 0000:00:04.0 eth0: no link during initialization. ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller Linux agpgart interface v0.100 (c) Dave Jones PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 22, pci mem e08e8000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 21, pci mem e08f2000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 20, pci mem e08f4000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ieee1394: Initialized config rom entry `ip1394' agpgart: Detected NVIDIA nForce2 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe0000000 ohci1394: $Rev: 1226 $ Ben Collins ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 17 (level, high) -> IRQ 17 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e6088000-e60887ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000461000003e56a] 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, high) -> IRQ 16 eth1: RealTek RTL8139 at 0xe09e6000, 00:00:1c:d7:58:77, IRQ 16 eth1: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 19 (level, high) -> IRQ 19 eth2: RealTek RTL8139 at 0xe09e8000, 00:04:61:4a:11:a5, IRQ 19 eth2: Identified 8139 chip type 'RTL-8101' eth1: link up, 10Mbps, full-duplex, lpa 0x4061 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 24 NET: Registered protocol family 10 u32 classifier Perfomance counters on OLD policer on Disabled Privacy Extensions on device c03b6600(lo) IPv6 over IPv4 tunneling driver Ingress scheduler: Classifier actions prefered over netfilter parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 eth0: no IPv6 routers present eth1: no IPv6 routers present ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 19 (level, high) -> IRQ 19 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 4x mode [drm] Loading R200 Microcode DROP-NEW:IN=ppp0 OUT= MAC= SRC=65.33.178.18 DST=213.146.113.159 LEN=836 TOS=0x00 PREC=0x00 TTL=112 ID=7383 PROTO=UDP SPT=22518 DPT=1026 LEN=816 CPU0 0: 1868635 XT-PIC timer 1: 15 IO-APIC-edge i8042 7: 2089 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 93 IO-APIC-edge i8042 14: 41 IO-APIC-edge ide0 15: 8437 IO-APIC-edge ide1 16: 6134 IO-APIC-level libata, eth1 17: 10787 IO-APIC-level ide2, ide3, ohci1394 18: 0 IO-APIC-level Bt87x audio 19: 123358 IO-APIC-level radeon@PCI:2:0:0 20: 0 IO-APIC-level ehci_hcd 21: 0 IO-APIC-level NVidia nForce2, ohci_hcd 22: 187250 IO-APIC-level eth0, ohci_hcd NMI: 0 LOC: 1868588 ERR: 0 MIS: 0 hope this helps, Ralf -- P: Linus Torvalds patch-2.2.4 -S: Buried alive in diapers +S: Buried alive in reporters