From: Suzuki K Poulose <suzuki.poulose@arm.com>
To: Jie Gan <jie.gan@oss.qualcomm.com>,
Mike Leach <mike.leach@arm.com>,
James Clark <james.clark@linaro.org>, Leo Yan <leo.yan@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Tingwei Zhang <tingwei.zhang@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Mao Jinlong <jinlong.mao@oss.qualcomm.com>,
Abel Vesa <abelvesa@kernel.org>,
Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Cc: coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com
Subject: Re: [PATCH v23 3/8] coresight: tmc: add a function to switch the ETR to a free etr_buf
Date: Wed, 18 Nov 2026 11:33:28 +0000 [thread overview]
Message-ID: <878eabf1-0742-45ad-892a-4c6a7b615d1f@arm.com> (raw)
In-Reply-To: <20261118-enable-byte-cntr-for-ctcu-v23-3-67fd9db6bc0e@oss.qualcomm.com>
On 18/11/2026 08:02, Jie Gan wrote:
> Add tmc_etr_switch_buf_node() to switch the ETR to a free etr_buf of the
> etr_buf_list without disabling the sink. It returns the node of the
> switched out etr_buf, so its synced data can be read while the ETR keeps
> tracing into the new one.
>
> Stopping the ETR, swapping the etr_buf and restarting the ETR have to be
> done in one critical section. Otherwise tmc_disable_etr_sink() can run
> in between and leave drvdata->etr_buf out of sync with the hardware.
> Provide the sequence as a TMC helper, so callers don't need to know
> about the locking of the ETR state.
>
> Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
> ---
> drivers/hwtracing/coresight/coresight-tmc-etr.c | 65 +++++++++++++++++++++++++
> drivers/hwtracing/coresight/coresight-tmc.h | 4 ++
> 2 files changed, 69 insertions(+)
>
> diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
> index e9213f456834..5032f5598e15 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
> +++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
> @@ -1224,6 +1224,71 @@ static void __tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
>
> }
>
> +static void tmc_etr_reset_sysfs_buf(struct tmc_drvdata *drvdata)
> +{
> + u32 sts;
> +
> + CS_UNLOCK(drvdata->base);
> + tmc_write_rrp(drvdata, drvdata->sysfs_buf->hwaddr);
> + tmc_write_rwp(drvdata, drvdata->sysfs_buf->hwaddr);
> + sts = readl_relaxed(drvdata->base + TMC_STS) & ~TMC_STS_FULL;
> + writel_relaxed(sts, drvdata->base + TMC_STS);
see below
> + CS_LOCK(drvdata->base);
> +}
> +
> +/**
> + * tmc_etr_switch_buf_node - switch the ETR to a free buffer of the etr_buf_list.
> + * @drvdata: drvdata of the TMC device.
> + *
> + * Stop the ETR, hand over the current buffer for reading, switch to a free
> + * buffer and restart the ETR. All of this is done with @drvdata->spinlock held,
> + * so it can't race with the sink disable path.
> + *
> + * Return: the node of the switched out buffer, or NULL if the sink isn't in
> + * sysfs mode or there is no free buffer. The ETR is left untouched in both
> + * cases.
> + */
> +struct etr_buf_node *tmc_etr_switch_buf_node(struct tmc_drvdata *drvdata)
> +{
> + struct etr_buf_node *nd, *curr_node = NULL, *picked_node = NULL;
> + unsigned long flags;
> +
> + raw_spin_lock_irqsave(&drvdata->spinlock, flags);
> + if (coresight_get_mode(drvdata->csdev) != CS_MODE_SYSFS)
> + goto out;
> +
> + list_for_each_entry(nd, &drvdata->etr_buf_list, link) {
> + if (nd->sysfs_buf == drvdata->sysfs_buf)
> + curr_node = nd;
> + else if (!picked_node && nd->is_free && !nd->reading)
> + picked_node = nd;
> + }
> +
> + if (!curr_node || !picked_node) {
> + curr_node = NULL;
> + goto out;
> + }
> +
> + __tmc_etr_disable_hw(drvdata);
> +
> + /* The switched out buffer is free again once it has been read */
> + curr_node->is_free = true;
> + curr_node->pos = 0;
> + curr_node->reading = true;
> + picked_node->is_free = false;
> + drvdata->sysfs_buf = picked_node->sysfs_buf;
> + drvdata->etr_buf = picked_node->sysfs_buf;
> +
> + tmc_etr_reset_sysfs_buf(drvdata);
Why are we doing this, when the following __tmc_etr_enable_hw() already
does the right thing ?
Suzuki
> + if (__tmc_etr_enable_hw(drvdata))
> + dev_err(&drvdata->csdev->dev, "Failed to restart the ETR\n");
> +out:
> + raw_spin_unlock_irqrestore(&drvdata->spinlock, flags);
> +
> + return curr_node;
> +}
> +EXPORT_SYMBOL_GPL(tmc_etr_switch_buf_node);
> +
> void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
> {
> __tmc_etr_disable_hw(drvdata);
> diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
> index 7c604b9f92e5..30b15c38b080 100644
> --- a/drivers/hwtracing/coresight/coresight-tmc.h
> +++ b/drivers/hwtracing/coresight/coresight-tmc.h
> @@ -212,12 +212,15 @@ struct tmc_resrv_buf {
> * struct etr_buf_node - node of the etr_buf_list
> * @sysfs_buf: Allocated sysfs_buf.
> * @is_free: Indicates whether the buffer is free to choose.
> + * @reading: Indicates the buffer attached to the node is being read by
> + * the user.
> * @pos: Offset to the start of the buffer.
> * @link: list_head of the node.
> */
> struct etr_buf_node {
> struct etr_buf *sysfs_buf;
> bool is_free;
> + bool reading;
> loff_t pos;
> struct list_head link;
> };
> @@ -465,5 +468,6 @@ struct etr_buf *tmc_etr_get_buffer(struct coresight_device *csdev,
> extern const struct attribute_group coresight_etr_group;
> void tmc_clean_etr_buf_list(struct tmc_drvdata *drvdata);
> int tmc_create_etr_buf_list(struct tmc_drvdata *drvdata, int num_nodes);
> +struct etr_buf_node *tmc_etr_switch_buf_node(struct tmc_drvdata *drvdata);
>
> #endif
>
next prev parent reply other threads:[~2026-11-18 11:33 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 8:02 [PATCH v23 0/8] coresight: ctcu: Enable byte-cntr function for TMC ETR Jie Gan
2026-11-18 8:02 ` [PATCH v23 1/8] coresight: core: refactor ctcu_get_active_port and make it generic Jie Gan
2026-11-18 8:02 ` [PATCH v23 2/8] coresight: tmc: add create/clean functions for etr_buf_list Jie Gan
2026-11-18 11:16 ` Suzuki K Poulose
2026-11-18 8:02 ` [PATCH v23 3/8] coresight: tmc: add a function to switch the ETR to a free etr_buf Jie Gan
2026-11-18 11:33 ` Suzuki K Poulose [this message]
2026-11-18 8:02 ` [PATCH v23 4/8] coresight: tmc: introduce tmc_sysfs_ops to wrap sysfs read operations Jie Gan
2026-11-18 8:02 ` [PATCH v23 5/8] coresight: etr: add a new function to retrieve the CTCU device Jie Gan
2026-11-18 8:02 ` [PATCH v23 6/8] dt-bindings: arm: add an interrupt property for Coresight CTCU Jie Gan
2026-11-18 8:02 ` [PATCH v23 7/8] coresight: ctcu: enable byte-cntr for TMC ETR devices Jie Gan
2026-11-18 8:02 ` [PATCH v23 8/8] arm64: dts: qcom: lemans: add interrupts to CTCU device Jie Gan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878eabf1-0742-45ad-892a-4c6a7b615d1f@arm.com \
--to=suzuki.poulose@arm.com \
--cc=abelvesa@kernel.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=coresight@lists.linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=james.clark@linaro.org \
--cc=jie.gan@oss.qualcomm.com \
--cc=jinlong.mao@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=leo.yan@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mike.leach@arm.com \
--cc=robh@kernel.org \
--cc=tingwei.zhang@oss.qualcomm.com \
--cc=yuanfang.zhang@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®