mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: Remi Pommarel <repk@triplefau.lt>,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-rpi-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, Remi Pommarel <repk@triplefau.lt>
Subject: Re: [PATCH v3 1/4] clk: bcm2835: add a round up ability to the clock divisor
Date: Mon, 07 Dec 2015 17:28:28 -0800	[thread overview]
Message-ID: <878u55d8zn.fsf@eliezer.anholt.net> (raw)
In-Reply-To: <1449418969-5565-2-git-send-email-repk@triplefau.lt>

[-- Attachment #1: Type: text/plain, Size: 2629 bytes --]

Remi Pommarel <repk@triplefau.lt> writes:

> Make bcm2835_clock_choose_div to optionally round up the chosen MASH divisor
> so that the resulting average rate will not be higher than the requested one.
>
> Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> ---
>  drivers/clk/bcm/clk-bcm2835.c | 22 ++++++++++++----------
>  1 file changed, 12 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
> index 39bf582..9e881ee 100644
> --- a/drivers/clk/bcm/clk-bcm2835.c
> +++ b/drivers/clk/bcm/clk-bcm2835.c
> @@ -1148,22 +1148,24 @@ static int bcm2835_clock_is_on(struct clk_hw *hw)
>  
>  static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
>  				    unsigned long rate,
> -				    unsigned long parent_rate)
> +				    unsigned long parent_rate,
> +				    bool round_up)
>  {
>  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
>  	const struct bcm2835_clock_data *data = clock->data;
> -	u32 unused_frac_mask = GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0);
> +	u32 unused_frac_mask =
> +		GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
>  	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
> +	u64 rem;
>  	u32 div;
>  
> -	do_div(temp, rate);
> +	rem = do_div(temp, rate);
>  	div = temp;
>  
> -	/* Round and mask off the unused bits */
> -	if (unused_frac_mask != 0) {
> -		div += unused_frac_mask >> 1;
> -		div &= ~unused_frac_mask;
> -	}
> +	/* Round up and mask off the unused bits */
> +	if (round_up && ((div & unused_frac_mask) != 0 || rem != 0))
> +		div += unused_frac_mask + 1;
> +	div &= ~unused_frac_mask;
>  
>  	/* Clamp to the limits. */
>  	div = max(div, unused_frac_mask + 1);
> @@ -1202,7 +1204,7 @@ static long bcm2835_clock_round_rate(struct clk_hw *hw,
>  				     unsigned long *parent_rate)
>  {
>  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
> -	u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate);
> +	u32 div = bcm2835_clock_choose_div(hw, rate, *parent_rate, false);
>  
>  	return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div);
>  }
> @@ -1271,7 +1273,7 @@ static int bcm2835_clock_set_rate(struct clk_hw *hw,
>  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
>  	struct bcm2835_cprman *cprman = clock->cprman;
>  	const struct bcm2835_clock_data *data = clock->data;
> -	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
> +	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false);

I think you meant ", true" on one of these.  With that fixed,

Reviewed-by: Eric Anholt <eric@anholt.net>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]

  reply	other threads:[~2015-12-08  1:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-06 16:22 [PATCH v3 0/4] Add PWM clock support for bcm2835 Remi Pommarel
2015-12-06 16:22 ` [PATCH v3 1/4] clk: bcm2835: add a round up ability to the clock divisor Remi Pommarel
2015-12-08  1:28   ` Eric Anholt [this message]
2016-01-10 16:27   ` Martin Sperl
2015-12-06 16:22 ` [PATCH v3 2/4] clk: bcm2835: Support for clock parent selection Remi Pommarel
2015-12-08  1:32   ` Eric Anholt
2015-12-06 16:22 ` [PATCH v3 3/4] clk: bcm2835: Add PWM clock support Remi Pommarel
2015-12-06 16:22 ` [PATCH v3 4/4] clk: bcm2835: Add PWM clock support to the device tree Remi Pommarel
2015-12-06 21:16   ` Stefan Wahren
2015-12-07 18:17     ` Remi Pommarel
2015-12-07 18:42       ` Stefan Wahren
2015-12-08  4:09         ` Eric Anholt
2015-12-16  7:57           ` Remi Pommarel
2015-12-16 20:05             ` Eric Anholt
2015-12-23 18:57 ` [PATCH v3 0/4] Add PWM clock support for bcm2835 Remi Pommarel
2015-12-25  5:06   ` Michael Turquette

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878u55d8zn.fsf@eliezer.anholt.net \
    --to=eric@anholt.net \
    --cc=lee@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=repk@triplefau.lt \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=swarren@wwwdotorg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®