Linux version 2.4.22-rc2 (root@ccprez.mcs.anl.gov) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81)) #1 SMP Wed Aug 13 15:21:09 CDT 2 003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc300 (usable) BIOS-e820: 000000001fffc300 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 0009e140 hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. On node 0 totalpages: 131068 zone(0): 4096 pages. zone(1): 126972 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM GNK Product ID: Teton SMP APIC at: 0xFEE00000 Processor #1 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #15 Version 17 at 0xFEC01000. Enabling APIC mode: Flat. Using 2 I/O APICs Processors: 2 IBM machine detected. Enabling interrupts during APM calls. Kernel command line: BOOT_IMAGE=linux-new ro root=803 BOOT_FILE=/boot/vmlinuz-2.4.22-rc2 console=ttyS0 console=tty1 Initializing CPU#0 Detected 863.983 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1723.59 BogoMIPS Memory: 515224k/524272k available (1691k kernel code, 8652k reserved, 521k data, 292k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 731.62 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1723.59 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3447.19 BogoMIPS). ENABLING IO-APIC IRQs Setting 14 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 14 ... ok. BIOS bug, IO-APIC#1 ID is 15 in the MPC table!... ... fixing up to 15. (tell your hw vendor) Setting 15 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 15 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 864.0140 MHz. ..... host bus clock speed is 132.9249 MHz. cpu: 0, clocks: 1329249, slice: 443083 CPU0 cpu: 1, clocks: 1329249, slice: 443083 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd2fc, last bus=4 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered peer bus 01 PCI->APIC IRQ transform: (B0,I2,P0) -> 27 PCI->APIC IRQ transform: (B0,I9,P0) -> 16 PCI->APIC IRQ transform: (B0,I10,P0) -> 18 PCI->APIC IRQ transform: (B0,I15,P0) -> 9 PCI->APIC IRQ transform: (B1,I3,P0) -> 28 PCI->APIC IRQ transform: (B1,I3,P1) -> 29 PCI->APIC IRQ transform: (B1,I6,P0) -> 22 PCI->APIC IRQ transform: (B1,I7,P0) -> 24 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: LTN485S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: attached ide-cdrom driver. hda: ATAPI 48X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00