RE: [PATCH v11 08/14] usb: otg: add OTG/dual-role core

[Felipe Balbi <balbi@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1464 bytes --]


Hi,

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> writes:
> Hi Roger,
>
>> From: Roger Quadros
>> Sent: Monday, June 20, 2016 7:13 PM
>> 
>> Hi,
>> 
>> On 20/06/16 10:45, Felipe Balbi wrote:
> < snip >
>> >> diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
>> >> index f4fc0aa..1d74fb8 100644
>> >> --- a/include/linux/usb/gadget.h
>> >> +++ b/include/linux/usb/gadget.h
>> >> @@ -328,6 +328,7 @@ struct usb_gadget_ops {
>> >>   * @in_epnum: last used in ep number
>> >>   * @mA: last set mA value
>> >>   * @otg_caps: OTG capabilities of this gadget.
>> >> + * @otg_dev: OTG controller device, if needs to be used with OTG core.
>> >
>> > do you really know of any platform which has a separate OTG controller?
>> >
>> 
>> Andrew had pointed out in [1] that Tegra210 has separate blocks for OTG, host
>> and gadget.
>> 
>> [1] http://article.gmane.org/gmane.linux.ports.tegra/22969
>> 
>> Yoshihiro,
>> 
>> How is the dual-role architecture on your Renesas platform?
>
> About the dual-role architecture, Renesas platform (R-Car H3) has a
> USB 2.0 host controller (EHCI/OHCI) with OTG function and a separate
> USB 2.0 peripheral controller (HS-USB).  The OTG function is related
> to some PHY control registers, so I intend to add the OTG/Dual-role
> core support into the phy driver (drivers/phy/phy-rcar-gen3-usb2.c).

that looks like a mux to me :-) thanks for the pointer

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]