From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268749AbUHLU0h (ORCPT ); Thu, 12 Aug 2004 16:26:37 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268745AbUHLU0N (ORCPT ); Thu, 12 Aug 2004 16:26:13 -0400 Received: from proxy.quengel.org ([213.146.113.159]:4480 "EHLO gerlin1.quengel.org") by vger.kernel.org with ESMTP id S268740AbUHLUY7 (ORCPT ); Thu, 12 Aug 2004 16:24:59 -0400 To: lkml Subject: Re: rc4-mm1 pci-routing References: <200408111642.59938.bjorn.helgaas@hp.com> <877js47eny.fsf-news@hsp-law.de> From: Ralf Gerbig Date: Thu, 12 Aug 2004 22:24:56 +0200 In-Reply-To: <877js47eny.fsf-news@hsp-law.de> (Ralf Gerbig's message of "Thu, 12 Aug 2004 13:56:49 +0200") Message-ID: <87acx0je93.fsf-news@hsp-law.de> User-Agent: Gnus/5.1006 (Gnus v5.10.6) XEmacs/21.4 (Security Through Obscurity, linux) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org * On Thu, Ingrid said: * On Wed, 11 Aug 2004 16:42:59 -0600, Bjorn Helgaas said: >> Hi Ralf, >> Thanks very much for your report. It looks like this device is the problem: >> 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) >> and it should get IRQ 21: >> ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 >> ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 >> The driver for this should be intel8x0.o, and it looks like you are >> loading it as a module. Could you build it in statically to the kernel >> and collect the complete dmesg from a boot with "pci=routeirq" (one >> from the boot that hangs would be nice as well, but that is a pain to >> collect unless you're using a serial console)? >> The usual problem is that a driver looks at pci_dev->irq before calling >> pci_enable_device(), but intel8x0.c seems to be doing the right thing >> in this regard. Hi Bjorn, all, scratch that one, one should check the facts before posting to lkml. On the serial I got some nice oops from wondershaper, bt878 etc. After moving the wonder to later stages, irgrouting works. Including ALSA and DVB with a Twinhan card. CPU0 0: 2225422 XT-PIC timer 1: 4147 IO-APIC-edge i8042 3: 29 IO-APIC-edge serial 7: 2868 IO-APIC-edge parport0 9: 0 IO-APIC-level acpi 12: 26161 IO-APIC-edge i8042 14: 42 IO-APIC-edge ide0 15: 5981 IO-APIC-edge ide1 16: 2225 IO-APIC-level libata, eth1 17: 13325 IO-APIC-level ide2, ide3, ohci1394 18: 474409 IO-APIC-level bttv0, bt878 19: 131535 IO-APIC-level radeon@PCI:2:0:0 20: 0 IO-APIC-level ohci_hcd 21: 1187 IO-APIC-level ohci_hcd, NVidia nForce2 22: 221920 IO-APIC-level eth0, ehci_hcd NMI: 0 LOC: 2224326 ERR: 0 MIS: 0 Inspecting /boot/System.map-2.6.8-rc4-mm1-dvb Loaded 26621 symbols from /boot/System.map-2.6.8-rc4-mm1-dvb. Symbols match kernel version 2.6.8. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.6.8-rc4-mm1-dvb (rge@gerlin1) (gcc version 3.3.3 (SuSE Linux)) #5 Thu Aug 12 21:15:35 CEST 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009e800 (usable) <4> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) <4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) <4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>511MB LOWMEM available. <7>On node 0 totalpages: 131056 <7> DMA zone: 4096 pages, LIFO batch:1 <7> Normal zone: 126960 pages, LIFO batch:16 <7> HighMem zone: 0 pages, LIFO batch:1 <6>DMI 2.2 present. <6>ACPI: RSDP (v000 Nvidia ) @ 0x000f74e0 <6>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 <6>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 <6>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff7e00 <6>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x4008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 6:10 APIC version 16 <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Built 1 zonelists <6>Initializing CPU#0 <4>Kernel command line: root=/dev/hde2 console=ttyS1,9600 console=tty0 3 <4>PID hash table entries: 2048 (order 11: 16384 bytes) <4>Detected 2091.760 MHz processor. <6>Using pmtmr for high-res timesource <4>Console: colour VGA+ 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 515232k/524224k available (1959k kernel code, 8480k reserved, 1103k data, 160k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay loop... 4145.15 BogoMIPS (lpj=2072576) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 <7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 512K (64 bytes/line) <7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>CPU: AMD Athlon(tm) XP 2800+ stepping 00 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 pin1=2 pin2=-1 <3>..MP-BIOS bug: 8254 timer not connected to IO-APIC <6>...trying to set up timer (IRQ0) through the 8259A ... failed. <6>...trying to set up timer as Virtual Wire IRQ... failed. <6>...trying to set up timer as ExtINT IRQ... works. <6>NET: Registered protocol family 16 <6>PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 <6>PCI: Using configuration type 1 <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20040715 <4> tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired <4>Parsing all Control Methods:................................................................................................................................................................................................................................................................................... <4>Table [DSDT](id F004) - 806 Objects with 77 Devices 275 Methods 36 Regions <4>ACPI Namespace successfully loaded at root c04559dc <4>evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful <4>evgpeblk-0980 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs at 0000000000004020 on int 0x9 <4>evgpeblk-0989 [06] ev_create_gpe_block : Found 9 Wake, Enabled 1 Runtime GPEs in this block <4>evgpeblk-0980 [06] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8 regs at 00000000000044A0 on int 0x9 <4>evgpeblk-0989 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block <4>Completing Region/Field/Buffer/Package initialization:.............................................................................................. <4>Initialized 36/36 Regions 9/9 Fields 31/31 Buffers 18/26 Packages (815 nodes) <4>Executing all Device _STA and_INI methods:................................................................................. <4>81 Devices found containing: 81 _STA, 2 _INI methods <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] <4>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. <4>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. <4>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. <4>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. <4>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. <4>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. <4>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. <4>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. <4>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>PnPBIOS: Scanning system for PnP BIOS support... <6>PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf30 <6>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf60, dseg 0xf0000 <6>PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver <5>SCSI subsystem initialized <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>PCI: Using ACPI for IRQ routing <6>** PCI interrupts are no longer routed automatically. If this <6>** causes a device to stop working, it is probably because the <6>** driver failed to call pci_enable_device(). As a temporary <6>** workaround, the "pci=routeirq" argument restores the old <6>** behavior. If this argument makes the device work again, <6>** please email the output of "lspci" to bjorn.helgaas@hp.com <6>** so I can fix the driver. <4>vesafb: probe of vesafb0 failed with error -6 <6>Machine check exception polling timer started. <6>cpufreq: Detected nForce2 chipset revision C1 <6>cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss. <6>cpufreq: FSB currently at 167 MHz, FID 12.5 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>ACPI: Power Button (FF) [PWRF] <6>ACPI: Fan [FAN] (on) <6>ACPI: Processor [CPU0] (supports C1) <6>ACPI: Thermal Zone [THRM] (61 C) <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <4>Using anticipatory io scheduler <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>NFORCE2: IDE controller at PCI slot 0000:00:09.0 <6>NFORCE2: chipset revision 162 <6>NFORCE2: not 100%% native mode: will probe irqs later <4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. <4>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. <6>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller <6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA <6>Probing IDE interface ide0... <4>hda: Maxtor 4D040H2, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>Probing IDE interface ide1... <4>hdc: Maxtor 2B020H1, ATA DISK drive <4>hdd: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>PDC20268: IDE controller at PCI slot 0000:01:09.0 <4>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 <6>ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 17 (level, high) -> IRQ 17 <6>PDC20268: chipset revision 2 <6>PDC20268: 100%% native mode on irq 17 <6> ide2: BM-DMA at 0x9800-0x9807, BIOS settings: hde:pio, hdf:pio <6> ide3: BM-DMA at 0x9808-0x980f, BIOS settings: hdg:pio, hdh:pio <6>Probing IDE interface ide2... <4>hde: SAMSUNG SV4002H, ATA DISK drive <4>ide2 at 0x8800-0x8807,0x8c02 on irq 17 <6>Probing IDE interface ide3... <4>hdg: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive <4>ide3 at 0x9000-0x9007,0x9402 on irq 17 <6>Probing IDE interface ide4... <4>ide4: Wait for ready failed before probe ! <6>Probing IDE interface ide5... <4>ide5: Wait for ready failed before probe ! <4>hda: max request size: 128KiB <6>hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) <4>hda: cache flushes not supported <6> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > <4>hdc: max request size: 128KiB <6>hdc: 40020624 sectors (20490 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100) <4>hdc: cache flushes not supported <6> hdc: hdc1 hdc2 hdc3 hdc4 <4>hde: max request size: 128KiB <6>hde: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=65535/16/63, UDMA(100) <4>hde: cache flushes supported <6> hde: hde1 hde2 <7>libata version 1.02 loaded. <7>sata_sil version 0.54 <4>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 <6>ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 16 (level, high) -> IRQ 16 <6>ata1: SATA max UDMA/100 cmd 0xE0802080 ctl 0xE080208A bmdma 0xE0802000 irq 16 <6>ata2: SATA max UDMA/100 cmd 0xE08020C0 ctl 0xE08020CA bmdma 0xE0802008 irq 16 <7>ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003 88:20ff <6>ata1: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 <6>ata1: dev 0 configured for UDMA/100 <6>scsi0 : sata_sil <7>ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c68 86:3e01 87:4003 88:20ff <6>ata2: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 <6>ata2: dev 0 configured for UDMA/100 <6>scsi1 : sata_sil <5> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 <5> Type: Direct-Access ANSI SCSI revision: 05 <5> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10 <5> Type: Direct-Access ANSI SCSI revision: 05 <5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) <5>SCSI device sda: drive cache: write back <6> sda: sda1 <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <5>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) <5>SCSI device sdb: drive cache: write back <6> sdb: sdb1 sdb2 sdb3 sdb4 <5>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 <6>usbcore: registered new driver usblp <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver <6>Initializing USB Mass Storage driver... <6>usbcore: registered new driver usb-storage <6>USB Mass Storage support registered. <6>mice: PS/2 mouse device common for all mice <6>input: AT Translated Set 2 keyboard on isa0060/serio0 <6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 <6>input: PC Speaker <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 4096 buckets, 32Kbytes <6>TCP: Hash tables configured (established 32768 bind 65536) <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <6>ACPI: (supports S0 S1 S4 S5) <4>ACPI wakeup devices: <4>HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1 <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem) readonly. <6>Freeing unused kernel memory: 160k freed <6>EXT3 FS on hde2, internal journal <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on hdc4, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sdb4, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>subfs 0.9 <6>Adding 307400k swap on /dev/hda6. Priority:42 extents:1 <6>Adding 133552k swap on /dev/hdc2. Priority:42 extents:1 <6>Adding 313228k swap on /dev/hde1. Priority:42 extents:1 <6>Generic RTC Driver v1.07 [...] Inspecting /boot/System.map-2.6.8-rc4-mm1-dvb Loaded 26621 symbols from /boot/System.map-2.6.8-rc4-mm1-dvb. Symbols match kernel version 2.6.8. No module symbols loaded - kernel modules not enabled. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.28. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22 PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 01695:1000 bound to 0000:00:04.0 eth0: no link during initialization. Linux agpgart interface v0.100 (c) Dave Jones ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, high) -> IRQ 21 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 21, pci mem e08a2000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, high) -> IRQ 20 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 20, pci mem e08ac000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 22 (level, high) -> IRQ 22 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 22, pci mem e08ae000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1226 $ Ben Collins ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 17 (level, high) -> IRQ 17 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e6088000-e60887ff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 16 (level, high) -> IRQ 16 eth1: RealTek RTL8139 at 0xe093a000, 00:00:1c:d7:58:77, IRQ 16 eth1: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 19 (level, high) -> IRQ 19 eth2: RealTek RTL8139 at 0xe093c000, 00:04:61:4a:11:a5, IRQ 19 eth2: Identified 8139 chip type 'RTL-8101' ieee1394: Host added: ID:BUS[0-00:1023] GUID[000461000003e56a] agpgart: Detected NVIDIA nForce2 chipset eth1: link up, 10Mbps, full-duplex, lpa 0x4061 agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xe0000000 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 NET: Registered protocol family 24 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 50240 usecs intel8x0: clocking to 47440 NET: Registered protocol family 10 Disabled Privacy Extensions on device c0387600(lo) IPv6 over IPv4 tunneling driver [...] Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI interrupt 0000:01:06.0[A] -> GSI 18 (level, high) -> IRQ 18 bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 18, latency: 32, mmio: 0xe4000000 bttv0: detected: Twinhan VisionPlus DVB-T [card=113], PCI subsystem ID is 1822:0001 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00f935fe [init] bttv0: using tuner=4 tuner: Ignoring new-style parameters in presence of obsolete ones bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI interrupt 0000:01:06.1[A] -> GSI 18 (level, high) -> IRQ 18 bt878(0): Bt878 (rev 17) at 01:06.1, irq: 18, latency: 32, memory: 0xe4001000 attach: checking "bt878 #0 [hw]" find by pci: checking "bt878 #0 [hw]" attach: "bt878 #0 [hw]", to card 0 Ralf -- P: Linus Torvalds patch-2.2.4 -S: Buried alive in diapers +S: Buried alive in reporters