Re: [PATCH v5 0/2] Enable ethernet for qcs8300

[Tingwei Zhang <quic_tingweiz@quicinc.com>]

On 12/6/2024 9:35 AM, Yijie Yang wrote:
> Add dts nodes to enable ethernet interface on qcs8300-ride.
> The EMAC, SerDes and EPHY version are the same as those in sa8775p.
> 
> Signed-off-by: Yijie Yang <quic_yijiyang@quicinc.com>
> ---
> This patch series depends on below patch series:
> https://lore.kernel.org/all/20240925-qcs8300_initial_dtsi-v2-0-494c40fa2a42@quicinc.com/ - Reviewed

Above series was already applied. I would say there's no dependency to 
block this series to be applied now. No need to respin for this but 
update the dependency status if a new version is required.

> https://lore.kernel.org/all/20241010-schema-v1-0-98b2d0a2f7a2@quicinc.com/ - Applied
> 
> Changes in v5:
> - Pad the register with zero for both 'ethernet0' and 'serdes0'.
> - Change PHY name from 'sgmii_phy0' to 'phy0'.
> - Link to v4: https://lore.kernel.org/r/20241123-dts_qcs8300-v4-0-b10b8ac634a9@quicinc.com
> 
> ---
> Yijie Yang (2):
>        arm64: dts: qcom: qcs8300: add the first 2.5G ethernet
>        arm64: dts: qcom: qcs8300-ride: enable ethernet0
> 
>   arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 112 ++++++++++++++++++++++++++++++
>   arch/arm64/boot/dts/qcom/qcs8300.dtsi     |  43 ++++++++++++
>   2 files changed, 155 insertions(+)
> ---
> base-commit: c83f0b825741bcb9d8a7be67c63f6b9045d30f5a
> change-id: 20241111-dts_qcs8300-f8383ef0f5ef
> 
> Best regards,


-- 
Thanks,
Tingwei