From: Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>
To: Xiubo Li <Li.Xiubo@freescale.com>
Cc: <broonie@kernel.org>, <perex@perex.cz>, <lgirdwood@gmail.com>,
<tiwai@suse.de>, <moinejf@free.fr>, <andrew@lunn.ch>,
<kuninori.morimoto.gx@renesas.com>, <jsarha@ti.com>,
<devicetree@vger.kernel.org>, <alsa-devel@alsa-project.org>,
<robh+dt@kernel.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ijc+devicetree@hellion.org.uk>,
<galak@codeaurora.org>,
linux-kernel@vger.kernel.org
Subject: Re: [alsa-devel] [PATCHv2 1/4] ASoC: simple-card: add asoc_simple_card_fmt_master() to simplify the code.
Date: Tue, 02 Sep 2014 17:26:53 -0700 (PDT) [thread overview]
Message-ID: <87egvt7dmd.wl%kuninori.morimoto.gx@gmail.com> (raw)
In-Reply-To: <1409649969-15759-2-git-send-email-Li.Xiubo@freescale.com>
Hi Xiubo
I was very surprised about this patch
because the idea is same as my local patch
(I was planned to send it to ML :)
I attached my local patch to sharing idea.
> +static inline unsigned int
> +asoc_simple_card_fmt_master(struct device_node *np,
> + struct device_node *bitclkmaster,
> + struct device_node *framemaster)
> +{
> + switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
> + case 0x11:
> + return SND_SOC_DAIFMT_CBS_CFS;
> + case 0x10:
> + return SND_SOC_DAIFMT_CBS_CFM;
> + case 0x01:
> + return SND_SOC_DAIFMT_CBM_CFS;
> + default:
> + return SND_SOC_DAIFMT_CBM_CFM;
> + }
> +
> + /* Shouldn't be here */
> + return -EINVAL;
> +}
I think this concept is nice,
but setting all fmt in this function is good for me
see my local patch
----------
>From 85562eb1587e5c184e4f4e0b183bd7063aaa81b7 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Thu, 28 Aug 2014 19:20:14 +0900
Subject: [PATCH] ASoC: simple-card: add asoc_simple_card_parse_daifmt()
Current daifmt setting method in simple-card driver is
placed to many places, and using un-readable/confusable method.
This patch adds new asoc_simple_card_parse_daifmt()
and tidyup code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index bea5901..c932103 100644
--- a/sound/soc/generic/simple-card.c
+++ b/sound/soc/generic/simple-card.c
@@ -167,6 +167,64 @@ asoc_simple_card_sub_parse_of(struct device_node *np,
return 0;
}
+static int asoc_simple_card_parse_daifmt(struct device_node *node,
+ struct simple_card_data *priv,
+ struct device_node *cpu,
+ struct device_node *codec,
+ char *prefix, int idx)
+{
+ struct device *dev = simple_priv_to_dev(priv);
+ struct device_node *bitclkmaster = NULL;
+ struct device_node *framemaster = NULL;
+ struct simple_dai_props *dai_props = simple_priv_to_props(priv, idx);
+ struct asoc_simple_dai *cpu_dai = &dai_props->cpu_dai;
+ struct asoc_simple_dai *codec_dai = &dai_props->codec_dai;
+ unsigned int daifmt;
+
+ daifmt = snd_soc_of_parse_daifmt(node, prefix,
+ &bitclkmaster, &framemaster);
+ daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
+
+ if (strlen(prefix) && !bitclkmaster && !framemaster) {
+ /*
+ * No dai-link level and master setting was not found from
+ * sound node level, revert back to legacy DT parsing and
+ * take the settings from codec node.
+ */
+ dev_dbg(dev, "Revert to legacy daifmt parsing\n");
+
+ cpu_dai->fmt = codec_dai->fmt =
+ snd_soc_of_parse_daifmt(codec, NULL, NULL, NULL) |
+ (daifmt & ~SND_SOC_DAIFMT_CLOCK_MASK);
+ } else {
+
+ switch (((codec == bitclkmaster) << 4) | (codec == framemaster)) {
+ case 0x11:
+ daifmt |= SND_SOC_DAIFMT_CBM_CFM;
+ break;
+ case 0x10:
+ daifmt |= SND_SOC_DAIFMT_CBM_CFS;
+ break;
+ case 0x01:
+ daifmt |= SND_SOC_DAIFMT_CBS_CFM;
+ break;
+ default:
+ daifmt |= SND_SOC_DAIFMT_CBS_CFS;
+ break;
+ }
+
+ cpu_dai->fmt = daifmt;
+ codec_dai->fmt = daifmt;
+ }
+
+ if (bitclkmaster)
+ of_node_put(bitclkmaster);
+ if (framemaster)
+ of_node_put(framemaster);
+
+ return 0;
+}
+
static int asoc_simple_card_dai_link_of(struct device_node *node,
struct simple_card_data *priv,
int idx,
@@ -175,10 +233,8 @@ static int asoc_simple_card_dai_link_of(struct device_node *node,
struct device *dev = simple_priv_to_dev(priv);
struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, idx);
struct simple_dai_props *dai_props = simple_priv_to_props(priv, idx);
- struct device_node *np = NULL;
- struct device_node *bitclkmaster = NULL;
- struct device_node *framemaster = NULL;
- unsigned int daifmt;
+ struct device_node *cpu = NULL;
+ struct device_node *codec = NULL;
char *name;
char prop[128];
char *prefix = "";
@@ -187,82 +243,35 @@ static int asoc_simple_card_dai_link_of(struct device_node *node,
if (is_top_level_node)
prefix = "simple-audio-card,";
- daifmt = snd_soc_of_parse_daifmt(node, prefix,
- &bitclkmaster, &framemaster);
- daifmt &= ~SND_SOC_DAIFMT_MASTER_MASK;
-
snprintf(prop, sizeof(prop), "%scpu", prefix);
- np = of_get_child_by_name(node, prop);
- if (!np) {
+ cpu = of_get_child_by_name(node, prop);
+
+ snprintf(prop, sizeof(prop), "%scodec", prefix);
+ codec = of_get_child_by_name(node, prop);
+
+ if (!cpu || !codec) {
ret = -EINVAL;
dev_err(dev, "%s: Can't find %s DT node\n", __func__, prop);
goto dai_link_of_err;
}
- ret = asoc_simple_card_sub_parse_of(np, &dai_props->cpu_dai,
- &dai_link->cpu_of_node,
- &dai_link->cpu_dai_name);
+ ret = asoc_simple_card_parse_daifmt(node, priv,
+ cpu, codec, prefix, idx);
if (ret < 0)
goto dai_link_of_err;
- dai_props->cpu_dai.fmt = daifmt;
- switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
- case 0x11:
- dai_props->cpu_dai.fmt |= SND_SOC_DAIFMT_CBS_CFS;
- break;
- case 0x10:
- dai_props->cpu_dai.fmt |= SND_SOC_DAIFMT_CBS_CFM;
- break;
- case 0x01:
- dai_props->cpu_dai.fmt |= SND_SOC_DAIFMT_CBM_CFS;
- break;
- default:
- dai_props->cpu_dai.fmt |= SND_SOC_DAIFMT_CBM_CFM;
- break;
- }
-
- of_node_put(np);
- snprintf(prop, sizeof(prop), "%scodec", prefix);
- np = of_get_child_by_name(node, prop);
- if (!np) {
- ret = -EINVAL;
- dev_err(dev, "%s: Can't find %s DT node\n", __func__, prop);
+ ret = asoc_simple_card_sub_parse_of(cpu, &dai_props->cpu_dai,
+ &dai_link->cpu_of_node,
+ &dai_link->cpu_dai_name);
+ if (ret < 0)
goto dai_link_of_err;
- }
- ret = asoc_simple_card_sub_parse_of(np, &dai_props->codec_dai,
+ ret = asoc_simple_card_sub_parse_of(codec, &dai_props->codec_dai,
&dai_link->codec_of_node,
&dai_link->codec_dai_name);
if (ret < 0)
goto dai_link_of_err;
- if (strlen(prefix) && !bitclkmaster && !framemaster) {
- /* No dai-link level and master setting was not found from
- sound node level, revert back to legacy DT parsing and
- take the settings from codec node. */
- dev_dbg(dev, "%s: Revert to legacy daifmt parsing\n",
- __func__);
- dai_props->cpu_dai.fmt = dai_props->codec_dai.fmt =
- snd_soc_of_parse_daifmt(np, NULL, NULL, NULL) |
- (daifmt & ~SND_SOC_DAIFMT_CLOCK_MASK);
- } else {
- dai_props->codec_dai.fmt = daifmt;
- switch (((np == bitclkmaster) << 4) | (np == framemaster)) {
- case 0x11:
- dai_props->codec_dai.fmt |= SND_SOC_DAIFMT_CBM_CFM;
- break;
- case 0x10:
- dai_props->codec_dai.fmt |= SND_SOC_DAIFMT_CBM_CFS;
- break;
- case 0x01:
- dai_props->codec_dai.fmt |= SND_SOC_DAIFMT_CBS_CFM;
- break;
- default:
- dai_props->codec_dai.fmt |= SND_SOC_DAIFMT_CBS_CFS;
- break;
- }
- }
-
if (!dai_link->cpu_dai_name || !dai_link->codec_dai_name) {
ret = -EINVAL;
goto dai_link_of_err;
@@ -304,12 +313,10 @@ static int asoc_simple_card_dai_link_of(struct device_node *node,
dai_link->cpu_dai_name = NULL;
dai_link_of_err:
- if (np)
- of_node_put(np);
- if (bitclkmaster)
- of_node_put(bitclkmaster);
- if (framemaster)
- of_node_put(framemaster);
+ if (cpu)
+ of_node_put(cpu);
+ if (codec)
+ of_node_put(codec);
return ret;
}
---------
Best regards
---
Kuninori Morimoto
next prev parent reply other threads:[~2014-09-03 0:26 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 9:26 [PATCHv2 0/4] simple-card: " Xiubo Li
2014-09-02 9:26 ` [PATCHv2 1/4] ASoC: simple-card: add asoc_simple_card_fmt_master() to " Xiubo Li
2014-09-02 10:21 ` Varka Bhadram
2014-09-02 10:38 ` Jean-Francois Moine
2014-09-02 10:42 ` Varka Bhadram
2014-09-02 11:04 ` Takashi Iwai
2014-09-02 11:09 ` Jean-Francois Moine
2014-09-02 11:32 ` Jyri Sarha
2014-09-02 11:10 ` Jyri Sarha
2014-09-03 2:37 ` Li.Xiubo
2014-09-03 8:36 ` Jyri Sarha
2014-09-03 8:39 ` Li.Xiubo
2014-09-03 0:26 ` Kuninori Morimoto [this message]
2014-09-03 2:21 ` [alsa-devel] " Li.Xiubo
2014-09-03 3:36 ` Kuninori Morimoto
2014-09-03 3:41 ` Li.Xiubo
2014-09-03 3:37 ` Li.Xiubo
2014-09-03 4:13 ` Kuninori Morimoto
2014-09-03 5:33 ` Li.Xiubo
2014-09-03 6:48 ` Jean-Francois Moine
2014-09-02 9:26 ` [PATCHv2 2/4] ASoC: simple-card: Merge single and muti DAI link(s) code Xiubo Li
2014-09-02 9:26 ` [PATCHv2 3/4] ASoC: simple-card: Adjust the comments of simple card Xiubo Li
2014-09-02 10:44 ` Jean-Francois Moine
2014-09-03 1:55 ` Li.Xiubo
2014-09-03 2:14 ` [alsa-devel] " Kuninori Morimoto
2014-09-03 2:24 ` Li.Xiubo
2014-09-02 9:26 ` [PATCHv2 4/4] ASoC: simple-card: binding: update binding to support the new style Xiubo Li
2014-09-02 10:41 ` Jean-Francois Moine
2014-09-03 1:54 ` Li.Xiubo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87egvt7dmd.wl%kuninori.morimoto.gx@gmail.com \
--to=kuninori.morimoto.gx@gmail.com \
--cc=Li.Xiubo@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=andrew@lunn.ch \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jsarha@ti.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=moinejf@free.fr \
--cc=pawel.moll@arm.com \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®