From: Sagi Grimberg <sagi@grimberg.me>
To: David Howells <dhowells@redhat.com>, netdev@vger.kernel.org
Cc: Alexander Duyck <alexander.duyck@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
David Ahern <dsahern@kernel.org>,
Matthew Wilcox <willy@infradead.org>,
Jens Axboe <axboe@kernel.dk>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Willem de Bruijn <willemb@google.com>,
Keith Busch <kbusch@kernel.org>, Jens Axboe <axboe@fb.com>,
Christoph Hellwig <hch@lst.de>,
Chaitanya Kulkarni <kch@nvidia.com>,
linux-nvme@lists.infradead.org
Subject: Re: [PATCH net-next v3 10/18] nvme/host: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage
Date: Wed, 21 Jun 2023 13:15:15 +0300 [thread overview]
Message-ID: <87f547b0-7826-b232-cd01-c879b6829951@grimberg.me> (raw)
In-Reply-To: <20230620145338.1300897-11-dhowells@redhat.com>
One comment:
format for title in nvme-tcp is:
"nvme-tcp: ..." for host patches, and
"nvmet-tcp: ..." for target patches.
But this can be fixed up when applying the patch set.
Other than that, for both nvme patches:
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
What tree will this be going from btw?
On 6/20/23 17:53, David Howells wrote:
> When transmitting data, call down into TCP using a single sendmsg with
> MSG_SPLICE_PAGES to indicate that content should be spliced rather than
> performing several sendmsg and sendpage calls to transmit header, data
> pages and trailer.
>
> Signed-off-by: David Howells <dhowells@redhat.com>
> Tested-by: Sagi Grimberg <sagi@grimberg.me>
> Acked-by: Willem de Bruijn <willemb@google.com>
> cc: Keith Busch <kbusch@kernel.org>
> cc: Jens Axboe <axboe@fb.com>
> cc: Christoph Hellwig <hch@lst.de>
> cc: Chaitanya Kulkarni <kch@nvidia.com>
> cc: "David S. Miller" <davem@davemloft.net>
> cc: Eric Dumazet <edumazet@google.com>
> cc: Jakub Kicinski <kuba@kernel.org>
> cc: Paolo Abeni <pabeni@redhat.com>
> cc: Jens Axboe <axboe@kernel.dk>
> cc: Matthew Wilcox <willy@infradead.org>
> cc: linux-nvme@lists.infradead.org
> cc: netdev@vger.kernel.org
> ---
>
> Notes:
> ver #2)
> - Wrap lines at 80.
>
> ver #3)
> - Split nvme/host from nvme/target changes.
>
> drivers/nvme/host/tcp.c | 46 +++++++++++++++++++++--------------------
> 1 file changed, 24 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
> index bf0230442d57..6f31cdbb696a 100644
> --- a/drivers/nvme/host/tcp.c
> +++ b/drivers/nvme/host/tcp.c
> @@ -997,25 +997,25 @@ static int nvme_tcp_try_send_data(struct nvme_tcp_request *req)
> u32 h2cdata_left = req->h2cdata_left;
>
> while (true) {
> + struct bio_vec bvec;
> + struct msghdr msg = {
> + .msg_flags = MSG_DONTWAIT | MSG_SPLICE_PAGES,
> + };
> struct page *page = nvme_tcp_req_cur_page(req);
> size_t offset = nvme_tcp_req_cur_offset(req);
> size_t len = nvme_tcp_req_cur_length(req);
> bool last = nvme_tcp_pdu_last_send(req, len);
> int req_data_sent = req->data_sent;
> - int ret, flags = MSG_DONTWAIT;
> + int ret;
>
> if (last && !queue->data_digest && !nvme_tcp_queue_more(queue))
> - flags |= MSG_EOR;
> + msg.msg_flags |= MSG_EOR;
> else
> - flags |= MSG_MORE | MSG_SENDPAGE_NOTLAST;
> + msg.msg_flags |= MSG_MORE;
>
> - if (sendpage_ok(page)) {
> - ret = kernel_sendpage(queue->sock, page, offset, len,
> - flags);
> - } else {
> - ret = sock_no_sendpage(queue->sock, page, offset, len,
> - flags);
> - }
> + bvec_set_page(&bvec, page, len, offset);
> + iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, len);
> + ret = sock_sendmsg(queue->sock, &msg);
> if (ret <= 0)
> return ret;
>
> @@ -1054,22 +1054,24 @@ static int nvme_tcp_try_send_cmd_pdu(struct nvme_tcp_request *req)
> {
> struct nvme_tcp_queue *queue = req->queue;
> struct nvme_tcp_cmd_pdu *pdu = nvme_tcp_req_cmd_pdu(req);
> + struct bio_vec bvec;
> + struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_SPLICE_PAGES, };
> bool inline_data = nvme_tcp_has_inline_data(req);
> u8 hdgst = nvme_tcp_hdgst_len(queue);
> int len = sizeof(*pdu) + hdgst - req->offset;
> - int flags = MSG_DONTWAIT;
> int ret;
>
> if (inline_data || nvme_tcp_queue_more(queue))
> - flags |= MSG_MORE | MSG_SENDPAGE_NOTLAST;
> + msg.msg_flags |= MSG_MORE;
> else
> - flags |= MSG_EOR;
> + msg.msg_flags |= MSG_EOR;
>
> if (queue->hdr_digest && !req->offset)
> nvme_tcp_hdgst(queue->snd_hash, pdu, sizeof(*pdu));
>
> - ret = kernel_sendpage(queue->sock, virt_to_page(pdu),
> - offset_in_page(pdu) + req->offset, len, flags);
> + bvec_set_virt(&bvec, (void *)pdu + req->offset, len);
> + iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, len);
> + ret = sock_sendmsg(queue->sock, &msg);
> if (unlikely(ret <= 0))
> return ret;
>
> @@ -1093,6 +1095,8 @@ static int nvme_tcp_try_send_data_pdu(struct nvme_tcp_request *req)
> {
> struct nvme_tcp_queue *queue = req->queue;
> struct nvme_tcp_data_pdu *pdu = nvme_tcp_req_data_pdu(req);
> + struct bio_vec bvec;
> + struct msghdr msg = { .msg_flags = MSG_DONTWAIT | MSG_MORE, };
> u8 hdgst = nvme_tcp_hdgst_len(queue);
> int len = sizeof(*pdu) - req->offset + hdgst;
> int ret;
> @@ -1101,13 +1105,11 @@ static int nvme_tcp_try_send_data_pdu(struct nvme_tcp_request *req)
> nvme_tcp_hdgst(queue->snd_hash, pdu, sizeof(*pdu));
>
> if (!req->h2cdata_left)
> - ret = kernel_sendpage(queue->sock, virt_to_page(pdu),
> - offset_in_page(pdu) + req->offset, len,
> - MSG_DONTWAIT | MSG_MORE | MSG_SENDPAGE_NOTLAST);
> - else
> - ret = sock_no_sendpage(queue->sock, virt_to_page(pdu),
> - offset_in_page(pdu) + req->offset, len,
> - MSG_DONTWAIT | MSG_MORE);
> + msg.msg_flags |= MSG_SPLICE_PAGES;
> +
> + bvec_set_virt(&bvec, (void *)pdu + req->offset, len);
> + iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, len);
> + ret = sock_sendmsg(queue->sock, &msg);
> if (unlikely(ret <= 0))
> return ret;
>
>
next prev parent reply other threads:[~2023-06-21 10:15 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-20 14:53 [PATCH net-next v3 00/18] splice, net: Switch over users of sendpage() and remove it David Howells
2023-06-20 14:53 ` [PATCH net-next v3 01/18] net: Copy slab data for sendmsg(MSG_SPLICE_PAGES) David Howells
2023-06-22 18:12 ` Jakub Kicinski
2023-06-22 18:28 ` Alexander Duyck
2023-06-22 19:40 ` David Howells
2023-06-22 20:28 ` Jakub Kicinski
2023-06-22 22:54 ` David Howells
2023-06-23 2:11 ` Jakub Kicinski
2023-06-23 9:08 ` David Howells
2023-06-23 9:52 ` Paolo Abeni
2023-06-23 10:06 ` David Howells
2023-06-23 10:21 ` Paolo Abeni
2023-06-23 8:08 ` Paolo Abeni
2023-06-23 9:06 ` David Howells
2023-06-23 9:37 ` Paolo Abeni
2023-06-23 10:00 ` David Howells
2023-06-20 14:53 ` [PATCH net-next v3 02/18] net: Display info about MSG_SPLICE_PAGES memory handling in proc David Howells
2023-06-23 8:18 ` Paolo Abeni
2023-06-23 9:42 ` David Howells
2023-06-20 14:53 ` [PATCH net-next v3 03/18] tcp_bpf, smc, tls, espintcp: Reduce MSG_SENDPAGE_NOTLAST usage David Howells
2023-06-20 14:53 ` [PATCH net-next v3 04/18] siw: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage to transmit David Howells
2023-06-21 8:57 ` Bernard Metzler
2023-06-20 14:53 ` [PATCH net-next v3 05/18] ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage David Howells
2023-06-20 14:53 ` [PATCH net-next v3 06/18] net: Use sendmsg(MSG_SPLICE_PAGES) not sendpage in skb_send_sock() David Howells
2023-06-20 14:53 ` [PATCH net-next v3 07/18] ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() David Howells
2023-06-20 14:53 ` [PATCH net-next v3 08/18] rds: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage David Howells
2023-06-20 14:53 ` [PATCH net-next v3 09/18] dlm: " David Howells
2023-06-20 14:53 ` [PATCH net-next v3 10/18] nvme/host: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage David Howells
2023-06-21 10:15 ` Sagi Grimberg [this message]
2023-06-21 12:35 ` David Howells
2023-06-21 14:05 ` Sagi Grimberg
2023-06-29 14:45 ` Aurelien Aptel
2023-06-29 14:49 ` Sagi Grimberg
2023-06-29 15:02 ` Aurelien Aptel
2023-06-29 21:23 ` David Howells
2023-06-29 21:33 ` Sagi Grimberg
2023-06-29 21:34 ` David Howells
2023-06-29 23:43 ` Jakub Kicinski
2023-06-30 16:10 ` Nathan Chancellor
2023-06-30 16:14 ` Jakub Kicinski
2023-06-30 19:28 ` Nathan Chancellor
2023-07-07 20:45 ` Nick Desaulniers
2023-06-20 14:53 ` [PATCH net-next v3 11/18] nvme/target: " David Howells
2023-06-20 14:53 ` [PATCH net-next v3 12/18] smc: Drop smc_sendpage() in favour of smc_sendmsg() + MSG_SPLICE_PAGES David Howells
2023-06-20 14:53 ` [PATCH net-next v3 13/18] ocfs2: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() David Howells
2023-06-20 14:53 ` [PATCH net-next v3 14/18] drbd: " David Howells
2023-06-20 14:53 ` [PATCH net-next v3 15/18] drdb: Send an entire bio in a single sendmsg David Howells
2023-06-20 14:53 ` [PATCH net-next v3 16/18] iscsi: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage David Howells
2023-06-20 14:53 ` [PATCH net-next v3 17/18] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES) David Howells
2023-06-20 14:53 ` [PATCH net-next v3 18/18] net: Kill MSG_SENDPAGE_NOTLAST David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87f547b0-7826-b232-cd01-c879b6829951@grimberg.me \
--to=sagi@grimberg.me \
--cc=alexander.duyck@gmail.com \
--cc=axboe@fb.com \
--cc=axboe@kernel.dk \
--cc=davem@davemloft.net \
--cc=dhowells@redhat.com \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=hch@lst.de \
--cc=kbusch@kernel.org \
--cc=kch@nvidia.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvme@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=willemb@google.com \
--cc=willemdebruijn.kernel@gmail.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®