Re: [PATCH] usb: dwc3: core: power on PHYs before initializing core

[Felipe Balbi <balbi@kernel.org>]

[-- Attachment #1: Type: text/plain, Size: 1170 bytes --]


Hi Roger,

William Wu <william.wu@rock-chips.com> writes:
> The dwc3_core_init() gets the PHYs and initializes the PHYs with
> the usb_phy_init() and phy_init() functions before initializing
> core, and power on the PHYs after core initialization is done.
>
> However, some platforms (e.g. Rockchip RK3399 DWC3 with Type-C
> USB3 PHY), it needs to do some special operation while power on
> the Type-C PHY before initializing DWC3 core. It's because that
> the RK3399 Type-C PHY requires to hold the DWC3 controller in
> reset state to keep the PIPE power state in P2 while configuring
> the Type-C PHY, otherwise, it may cause waiting for the PIPE ready
> timeout. In this case, if we power on the PHYs after the DWC3 core
> initialization is done, the core will be reset to uninitialized
> state after power on the PHYs.
>
> Fix this by powering on the PHYs before initializing core. And
> because the GUID register may also be reset in this case, so we
> need to configure the GUID register after powering on the PHYs.
>
> Signed-off-by: William Wu <william.wu@rock-chips.com>

does this cause any regressions for your boards?

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]