Fabio Estevam writes: > Hi Sergey, > > On Mon, Oct 6, 2025 at 5:11 PM Sergey Organov wrote: > >> I've checked that I end-up with the same DTB as you sent me off-list for >> this configuration, so at least this part seems to work fine on my side. >> >> I also tried the imx_v6_v7_defconfig - based kernel on my board >> (obviously with my custom DTB), and the kernel still doesn't boot. >> >> Further, I've found that it's enough to disable CONFIG_REGULATOR_ANATOP >> in my custom kernel config to get kernel to see eMMC card, and then >> mount it as root file-system. >> >> I still fail to see what I do (or don't do) in my DTS (or kernel config) >> to confuse the kernel, and how to figure that out. Any ideas? > > Please share your dts so we can take a look. It is built form multiple .dtsi, so I figure I attach the one after pre-processing stage. Please let me know if you'd prefer I rather manually insert all the custom .dtsi into a single .dts, and send that one instead.