mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Mark Brown <broonie@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Allan Nielsen <allan.nielsen@microchip.com>
Subject: Re: [PATCH] spi: dw-mmio: add MSCC Jaguar2 support
Date: Wed, 29 Aug 2018 14:55:23 +0200	[thread overview]
Message-ID: <87lg8pib7o.fsf@bootlin.com> (raw)
In-Reply-To: <20180829124548.4703-1-alexandre.belloni@bootlin.com> (Alexandre Belloni's message of "Wed, 29 Aug 2018 14:45:48 +0200")

Hi Alexandre,
 
 On mer., août 29 2018, Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:

> Unfortunately, the Jaguar2 CPU_SYSTEM_CTRL register set has a different
> layout than the Ocelot one. Handle that while keeping most of the code
> common.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>

Gregory

> ---
>
> Hi,
>
> This is really unfortunate and I hope it will not be necessary to do the same
> for every SoC in the line.
>
> I didn't use a regmap_field because it is only accessed once at probe time.
>
>  drivers/spi/spi-dw-mmio.c | 28 ++++++++++++++++++++++------
>  1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
> index e80f60ed6fdf..351f49976161 100644
> --- a/drivers/spi/spi-dw-mmio.c
> +++ b/drivers/spi/spi-dw-mmio.c
> @@ -34,8 +34,8 @@ struct dw_spi_mmio {
>  };
>  
>  #define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
> -#define OCELOT_IF_SI_OWNER_MASK			GENMASK(5, 4)
>  #define OCELOT_IF_SI_OWNER_OFFSET		4
> +#define JAGUAR2_IF_SI_OWNER_OFFSET		6
>  #define MSCC_IF_SI_OWNER_SISL			0
>  #define MSCC_IF_SI_OWNER_SIBM			1
>  #define MSCC_IF_SI_OWNER_SIMC			2
> @@ -76,7 +76,8 @@ static void dw_spi_mscc_set_cs(struct spi_device *spi, bool enable)
>  }
>  
>  static int dw_spi_mscc_init(struct platform_device *pdev,
> -			    struct dw_spi_mmio *dwsmmio)
> +			    struct dw_spi_mmio *dwsmmio,
> +			    const char *cpu_syscon, u32 if_si_owner_offset)
>  {
>  	struct dw_spi_mscc *dwsmscc;
>  	struct resource *res;
> @@ -92,7 +93,7 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
>  		return PTR_ERR(dwsmscc->spi_mst);
>  	}
>  
> -	dwsmscc->syscon = syscon_regmap_lookup_by_compatible("mscc,ocelot-cpu-syscon");
> +	dwsmscc->syscon = syscon_regmap_lookup_by_compatible(cpu_syscon);
>  	if (IS_ERR(dwsmscc->syscon))
>  		return PTR_ERR(dwsmscc->syscon);
>  
> @@ -101,8 +102,8 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
>  
>  	/* Select the owner of the SI interface */
>  	regmap_update_bits(dwsmscc->syscon, MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL,
> -			   OCELOT_IF_SI_OWNER_MASK,
> -			   MSCC_IF_SI_OWNER_SIMC << OCELOT_IF_SI_OWNER_OFFSET);
> +			   0x3 << if_si_owner_offset,
> +			   MSCC_IF_SI_OWNER_SIMC << if_si_owner_offset);
>  
>  	dwsmmio->dws.set_cs = dw_spi_mscc_set_cs;
>  	dwsmmio->priv = dwsmscc;
> @@ -110,6 +111,20 @@ static int dw_spi_mscc_init(struct platform_device *pdev,
>  	return 0;
>  }
>  
> +static int dw_spi_mscc_ocelot_init(struct platform_device *pdev,
> +				   struct dw_spi_mmio *dwsmmio)
> +{
> +	return dw_spi_mscc_init(pdev, dwsmmio, "mscc,ocelot-cpu-syscon",
> +				OCELOT_IF_SI_OWNER_OFFSET);
> +}
> +
> +static int dw_spi_mscc_jaguar2_init(struct platform_device *pdev,
> +				    struct dw_spi_mmio *dwsmmio)
> +{
> +	return dw_spi_mscc_init(pdev, dwsmmio, "mscc,jaguar2-cpu-syscon",
> +				JAGUAR2_IF_SI_OWNER_OFFSET);
> +}
> +
>  static int dw_spi_mmio_probe(struct platform_device *pdev)
>  {
>  	int (*init_func)(struct platform_device *pdev,
> @@ -212,7 +227,8 @@ static int dw_spi_mmio_remove(struct platform_device *pdev)
>  
>  static const struct of_device_id dw_spi_mmio_of_match[] = {
>  	{ .compatible = "snps,dw-apb-ssi", },
> -	{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_init},
> +	{ .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init},
> +	{ .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init},
>  	{ /* end of table */}
>  };
>  MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

  reply	other threads:[~2018-08-29 12:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 12:45 Alexandre Belloni
2018-08-29 12:55 ` Gregory CLEMENT [this message]
2018-08-29 15:09 ` Applied "spi: dw-mmio: add MSCC Jaguar2 support" to the spi tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87lg8pib7o.fsf@bootlin.com \
    --to=gregory.clement@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=allan.nielsen@microchip.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome