Re: [PATCH v6 0/6] drm/ssd130x: Add support for the Solomon SSD1351 OLED controller

[Javier Martinez Canillas <javierm@redhat.com>]

Amit Barzilai <amit.barzilai22@gmail.com> writes:

Hello Amit,

> This series adds support for the Solomon SSD1351, a 128x128 65k-color
> RGB OLED controller, to the ssd130x DRM driver:
>
>   - Patch 1 adds the device tree binding.
>
>   - Patch 2 switches the SSD133X family from RGB332 to RGB565, bringing
>     65k color to the SSD1331.
>
>   - Patches 3 to 5 are preparatory cleanups requested on v3: constify
>     the ssd130x_write_data() 'values' parameter, convert
>     ssd130x_spi_id[] to C99 initializers, and reimplement
>     ssd130x_write_cmd() as a variadic wrapper around
>     ssd130x_write_cmds() so a single loop remains.
>
>   - Patch 6 adds the SSD1351 as a new SSD135X_FAMILY. It gets its own
>     primary plane update/disable, encoder enable and backlight
>     callbacks; only the callbacks with no family-specific logic
>     (ssd133x_primary_plane_atomic_check(), ssd133x_crtc_atomic_check()
>     and ssd130x_encoder_atomic_disable()) are reused as is. It also
>     sends command parameters on the data path, handled in
>     ssd130x_write_cmds() via a new cmd_params_are_data flag; see [2]
>     for why the split lives there rather than in the SPI transport.
>
> Testing:
>
>   - Patches 1, 3, 4, 5 and 6 are tested on an SSD1351.
>   - The SSD1331 RGB565 change (patch 2) was kindly tested by Javier on
>     his SSD1331.
>
> Thanks to Javier, Andy, Krzysztof and Fabio for the reviews.
>
> [1] v5 of this series:
>     https://lore.kernel.org/dri-devel/20260823111959.17029-1-amit.barzilai22@gmail.com
> [2] Command parameter path discussion:
>     https://lore.kernel.org/dri-devel/20260811122603.30773-1-amit.barzilai22@gmail.com
>
> ---
>
> Changes since v5 [1]:
> - Patch 6: move the zero length check to the top of
>   ssd130x_write_cmds() so it guards both command paths, and comment
>   the len == 1 early return.
> - Use the "Assisted-by: LLM" attribution form.
> - Rebased on drm-misc-next.
> - Collect Andy's Reviewed-by on patch 2 and Javier's on patches 4, 5
>   and 6.
>
> Amit Barzilai (6):
>   dt-bindings: display: Add Solomon SSD1351 OLED controller
>   drm/ssd130x: Change SSD133X color format to RGB565 from RGB332
>   drm/ssd130x: Constify ssd130x_write_data() 'values' parameter
>   drm/ssd130x: Replace positional ssd130x_spi_id[] initialization with
>     C99
>   drm/ssd130x: Implement ssd130x_write_cmd() on top of
>     ssd130x_write_cmds()
>   drm/ssd130x: Add SSD135X_FAMILY and SSD1351 support
>
>  .../bindings/display/solomon,ssd1351.yaml     |  42 ++
>  drivers/gpu/drm/solomon/ssd130x-spi.c         |  25 +-
>  drivers/gpu/drm/solomon/ssd130x.c             | 421 +++++++++++++++---
>  drivers/gpu/drm/solomon/ssd130x.h             |  10 +-
>  4 files changed, 433 insertions(+), 65 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
>
> base-commit: 766bfba0f3bae329f99b42dcabc3ef11fa368f0b
> -- 
> 2.55.0
>

Pushed to drm-misc (drm-misc-next). Thanks!

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat