From: Michael Poole <mdpoole@troilus.org>
To: kallol@nucleodyne.com
Cc: linux-kernel@vger.kernel.org
Subject: Re: SPI-4 device support on linux
Date: Thu, 02 Jun 2005 05:26:52 -0400 [thread overview]
Message-ID: <87mzq9hzxf.fsf@sanosuke.troilus.org> (raw)
In-Reply-To: <20050602023436.u0kjvng924e84g44@www.nucleodyne.com> (kallol@nucleodyne.com's message of "Thu, 02 Jun 2005 02:34:36 -0400")
kallol@nucleodyne.com writes:
> Hello,
> We have been evaluating a project to develop linux driver
> and stack for SPI-4 devices. SPI-4 stands for System Packet Interface
> Level 4.
>
> While searching on internet I came across a few articles on SPI-4 protocol.
> One of the links is given below:
>
> http://www.altera.com/products/devices/stratixgx/features/sgx-spi.html
>
>
> Is there any update on linux driver support for SPI-4 devices?
You can get the specifications for the SPI family of interfaces at
http://www.oiforum.com/public/impagreements.html . However, it is an
electrical (physical and link layer) interface. It does not specify a
host interface, since the interesting feature of most devices is not
an SPI-4 interface.
There may be cards out there that do have SPI-4 interfaces and Linux
drivers, but the two are not necessarily related: the likely problem
areas for a device driver are those shared with any 10 Gbit card, and
are not specific to SPI-4 cards.
Michael Poole
prev parent reply other threads:[~2005-06-02 9:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-02 6:34 kallol
2005-06-02 9:26 ` Michael Poole [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mzq9hzxf.fsf@sanosuke.troilus.org \
--to=mdpoole@troilus.org \
--cc=kallol@nucleodyne.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®