From: Takashi Iwai <tiwai@suse.de>
To: Ajanesh Lal <ajaneshlal3@gmail.com>
Cc: tiwai@suse.com, perex@perex.cz, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ALSA: hda/realtek: Add mute and mic-mute LEDs for HP ENVY 16 (103c:8be5)
Date: Tue, 20 Oct 2026 13:54:20 +0200 [thread overview]
Message-ID: <87o6coh9jn.wl-tiwai@suse.de> (raw)
In-Reply-To: <baf51d2a-e2f8-4c01-ab2b-3fd8834c94ca@gmail.com>
On Tue, 20 Oct 2026 12:32:17 +0200,
Ajanesh Lal wrote:
>
> The HP ENVY Laptop 16-h1xxx (PCI SSID 103c:8be5) uses an ALC245 codec
> with CS35L41 I2C speaker amplifiers. No LED fixup is applied for this
> subsystem ID, so the speaker mute LED and the microphone mute LED are
> never driven and do not follow their keys.
>
> Add a fixup that calls the existing ALC245 mute LED COEF helper and the
> GPIO mic-mute LED helper directly, then chains to the CS35L41 I2C
> amplifier setup so the speakers keep working. Use it for 103c:8be5.
>
> Tested on an HP ENVY Laptop 16-h1xxx running kernel 7.2.11: the
> hda::mute and hda::micmute LEDs appear and follow their keys, and the
> speaker amplifiers still bind (CS35L41 Bound in dmesg). The mic LED
> GPIO pin and polarity are not verified on other hardware.
>
> Assisted-by: Claude:claude-haiku-5-5
> Signed-off-by: DragonicRage13 <ajaneshlal3@gmail.com>
The patch can't be applied, likely because your mailer broke the
spaces and tabs. Could you fix your mailer setup and resubmit?
At best, use git send-email.
thanks,
Takashi
> ---
> sound/hda/codecs/realtek/alc269.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/sound/hda/codecs/realtek/alc269.c
> b/sound/hda/codecs/realtek/alc269.c
> index e98cc42e1..850a15801 100644
> --- a/sound/hda/codecs/realtek/alc269.c
> +++ b/sound/hda/codecs/realtek/alc269.c
> @@ -1572,6 +1572,14 @@ static void
> alc245_fixup_hp_mute_led_coefbit(struct hda_codec *codec,
> }
> }
>
> +/* mute LED via COEF bit and mic-mute LED via GPIO, called directly */
> +static void alc245_fixup_cs35l41_mute_micmute(struct hda_codec *codec,
> + const struct hda_fixup *fix, int action)
> +{
> + alc245_fixup_hp_mute_led_coefbit(codec, fix, action);
> + alc245_fixup_hp_gpio_led(codec, fix, action);
> +}
> +
> static void alc245_fixup_hp_mute_led_v1_coefbit(struct hda_codec *codec,
> const struct hda_fixup *fix,
> int action)
> @@ -4230,6 +4238,7 @@ enum {
> ALC245_FIXUP_BASS_HP_DAC,
> ALC245_FIXUP_ACER_MICMUTE_LED,
> ALC245_FIXUP_CS35L41_I2C_2_MUTE_LED,
> + ALC245_FIXUP_CS35L41_I2C_2_MUTE_MICMUTE_LED,
> ALC236_FIXUP_HP_DMIC,
> ALC256_FIXUP_HONOR_MRB_XXX_M1020_AUDIO,
> ALC245_FIXUP_HP_ENVY_X360_15_FH0XXX,
> @@ -6859,6 +6868,12 @@ static const struct hda_fixup alc269_fixups[] = {
> .chained = true,
> .chain_id = ALC287_FIXUP_CS35L41_I2C_2,
> },
> + [ALC245_FIXUP_CS35L41_I2C_2_MUTE_MICMUTE_LED] = {
> + .type = HDA_FIXUP_FUNC,
> + .v.func = alc245_fixup_cs35l41_mute_micmute,
> + .chained = true,
> + .chain_id = ALC287_FIXUP_CS35L41_I2C_2,
> + },
> [ALC236_FIXUP_HP_DMIC] = {
> .type = HDA_FIXUP_PINS,
> .v.pins = (const struct hda_pintbl[]) {
> @@ -7361,7 +7376,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = {
> SND_PCI_QUIRK(0x103c, 0x8be1, "HP Envy 15",
> ALC287_FIXUP_CS35L41_I2C_2),
> SND_PCI_QUIRK(0x103c, 0x8be2, "HP Envy 15",
> ALC287_FIXUP_CS35L41_I2C_2),
> SND_PCI_QUIRK(0x103c, 0x8be3, "HP Envy 15",
> ALC287_FIXUP_CS35L41_I2C_2),
> - SND_PCI_QUIRK(0x103c, 0x8be5, "HP Envy 16",
> ALC287_FIXUP_CS35L41_I2C_2),
> + SND_PCI_QUIRK(0x103c, 0x8be5, "HP Envy 16",
> ALC245_FIXUP_CS35L41_I2C_2_MUTE_MICMUTE_LED),
> SND_PCI_QUIRK(0x103c, 0x8be6, "HP Envy 16",
> ALC287_FIXUP_CS35L41_I2C_2),
> SND_PCI_QUIRK(0x103c, 0x8be7, "HP Envy 17",
> ALC287_FIXUP_CS35L41_I2C_2),
> SND_PCI_QUIRK(0x103c, 0x8be8, "HP Envy 17",
> ALC287_FIXUP_CS35L41_I2C_2),
> --
> 2.56.0
>
>
prev parent reply other threads:[~2026-10-20 11:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 10:32 Ajanesh Lal
2026-10-20 11:54 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o6coh9jn.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=ajaneshlal3@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®