From: "Björn Töpel" <bjorn@kernel.org>
To: Guo Ren <guoren@kernel.org>, "liaochang (A)" <liaochang1@huawei.com>
Cc: palmer@dabbelt.com, paul.walmsley@sifive.com,
mhiramat@kernel.org, conor.dooley@microchip.com,
penberg@kernel.org, mark.rutland@arm.com,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
Guo Ren <guoren@linux.alibaba.com>
Subject: Re: [PATCH] riscv: kprobe: Optimize kprobe with accurate atomicity
Date: Mon, 30 Jan 2023 16:28:15 +0100 [thread overview]
Message-ID: <87r0vc9h4g.fsf@all.your.base.are.belong.to.us> (raw)
In-Reply-To: <CAJF2gTS0s4X_uwLaEeSqKAyRmxCR2vxRuHhz7-SP2w4bBqzr+Q@mail.gmail.com>
Guo Ren <guoren@kernel.org> writes:
>> In the serie of RISCV OPTPROBES [1], it patches a long-jump instructions pair
>> AUIPC/JALR in kernel text, so in order to ensure other CPUs does not execute
>> in the instructions that will be modified, it is still need to stop other CPUs
>> via patch_text API, or you have any better solution to achieve the purpose?
> - The stop_machine is an expensive way all architectures should
> avoid, and you could keep that in your OPTPROBES implementation files
> with static functions.
> - The stop_machine couldn't work with PREEMPTION, so your
> implementation needs to work with !PREEMPTION.
...and stop_machine() with !PREEMPTION is broken as well, when you're
replacing multiple instructions (see Mark's post at [1]). The
stop_machine() dance might work when you're replacing *one* instruction,
not multiple as in the RISC-V case. I'll expand on this in a comment in
the OPTPROBES v6 series.
>> > static void __kprobes arch_prepare_simulate(struct kprobe *p)
>> > @@ -114,16 +120,23 @@ void *alloc_insn_page(void)
>> > /* install breakpoint in text */
>> > void __kprobes arch_arm_kprobe(struct kprobe *p)
>> > {
>> > - if ((p->opcode & __INSN_LENGTH_MASK) == __INSN_LENGTH_32)
>> > - patch_text(p->addr, __BUG_INSN_32);
>> > - else
>> > - patch_text(p->addr, __BUG_INSN_16);
>> > +#ifdef CONFIG_RISCV_ISA_C
>> > + u32 opcode = __BUG_INSN_16;
>> > +#else
>> > + u32 opcode = __BUG_INSN_32;
>> > +#endif
>> > + patch_text_nosync(p->addr, &opcode, GET_INSN_LENGTH(opcode));
>>
>> Sounds good, but it will leave some RVI instruction truncated in kernel text,
>> i doubt kernel behavior depends on the rest of the truncated instruction, well,
>> it needs more strict testing to prove my concern :)
> I do this on purpose, and it doesn't cause any problems. Don't worry;
> IFU hw must enforce the fetch sequence, and there is no way to execute
> broken instructions even in the speculative execution path.
This is stretching reality a bit much. ARMv8, e.g., has a chapter in the
Arm ARM [2] Appendix B "Concurrent modification and execution of
instructions" (CMODX). *Some* instructions can be replaced concurrently,
and others cannot without caution. Assuming that that all RISC-V
implementations can, is a stretch. RISC-V hasn't even specified the
behavior of CMODX (which is problematic).
If anything it would be more likely that the existing
"stop_machine()-to-replace-with-ebreak" works (again, replacing one
instruction does not have the !PREEMPTION issues). Then again, no spec,
so mostly guessing from my side. :-(
Oh, but the existing "ebreak replace" might be broken like [3].
Björn
[1] https://lore.kernel.org/linux-riscv/Y7%2F6AtX5X0+5qF6Y@FVFF77S0Q05N/
[2] https://developer.arm.com/documentation/ddi0487/latest
[3] https://lore.kernel.org/linux-riscv/20230126170607.1489141-2-guoren@kernel.org/
next prev parent reply other threads:[~2023-01-30 15:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 16:15 guoren
2023-01-28 3:52 ` liaochang (A)
2023-01-28 4:45 ` Guo Ren
2023-01-30 15:28 ` Björn Töpel [this message]
2023-01-30 15:49 ` Mark Rutland
2023-01-30 16:56 ` Björn Töpel
2023-01-31 1:48 ` Guo Ren
2023-01-31 7:12 ` Björn Töpel
2023-01-31 8:30 ` Guo Ren
2023-01-31 10:33 ` Mark Rutland
2023-02-16 15:23 ` Masami Hiramatsu
2023-02-20 10:35 ` Mark Rutland
2023-02-21 1:30 ` Guo Ren
2023-01-31 1:01 ` Guo Ren
2023-01-31 1:09 ` Guo Ren
2023-01-31 7:03 ` Björn Töpel
2023-01-31 8:27 ` Guo Ren
2023-01-31 6:40 ` Björn Töpel
2023-01-31 8:15 ` Guo Ren
2023-01-31 10:56 ` Andrea Parri
2023-01-31 13:23 ` Guo Ren
2023-02-16 7:54 ` Björn Töpel
2023-02-17 2:28 ` Guo Ren
2023-02-17 7:32 ` Björn Töpel
2023-02-21 1:56 ` Guo Ren
2023-02-16 15:42 ` Masami Hiramatsu
2023-02-21 0:57 ` Guo Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r0vc9h4g.fsf@all.your.base.are.belong.to.us \
--to=bjorn@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=guoren@kernel.org \
--cc=guoren@linux.alibaba.com \
--cc=liaochang1@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mhiramat@kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=penberg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®