From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753046Ab2ITGvK (ORCPT ); Thu, 20 Sep 2012 02:51:10 -0400 Received: from icebox.esperi.org.uk ([81.187.191.129]:37425 "EHLO mail.esperi.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751602Ab2ITGvH (ORCPT ); Thu, 20 Sep 2012 02:51:07 -0400 From: Nix To: stan@hardwarefreak.com Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: Areca hardware RAID / first-ever SCSI bus reset: am I about to lose this disk controller? References: <87mx0lsv4d.fsf@spindle.srvr.nix> <505A47A0.1060709@hardwarefreak.com> Emacs: because editing your files should be a traumatic experience. Date: Thu, 20 Sep 2012 07:51:01 +0100 In-Reply-To: <505A47A0.1060709@hardwarefreak.com> (Stan Hoeppner's message of "Wed, 19 Sep 2012 17:30:56 -0500") Message-ID: <87r4pxqjai.fsf@spindle.srvr.nix> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.2.50 (gnu/linux) MIME-Version: 1.0 Content-Type: text/plain X-DCC-wuwien-Metrics: spindle 1290; Body=3 Fuz1=3 Fuz2=3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 19 Sep 2012, Stan Hoeppner stated: > On 9/19/2012 1:52 PM, Nix wrote: >> So I have this x86-64 server running Linux 3.5.1 > > When did you install 3.5.1 on this machine? Forty days ago. > If fairly recently, does it > run without these errors when booted into the previous kernel? Well, since this error happened only once, and after thirty-nine days of uptime at that, I'm not sure how I can find out. :) >> with a SATA-on-PCIe >> Areca 1210 hardware RAID-5 controller driven by libata which has been >> humming along happily for years -- but suddenly, today, the entire >> machine froze for a couple of minutes (or at least fs access froze), >> followed by this in the logs: >> >> Sep 19 16:55:47 spindle notice: [3447524.381843] arcmsr0: abort device command of scsi id = 0 lun = 1 >> [... repeated a few times at intervals over the next five minutes, >> followed by a mass of them at 16:59:29, and...] >> Sep 19 16:59:25 spindle err: [3447657.821450] arcmsr: executing bus reset eh.....num_resets = 0, num_aborts = 33 >> Sep 19 16:59:25 spindle notice: [3447697.878386] arcmsr0: wait 'abort all outstanding command' timeout >> Sep 19 16:59:25 spindle notice: [3447697.878628] arcmsr0: executing hw bus reset ..... >> Sep 19 16:59:25 spindle err: [3447698.287054] irq 16: nobody cared (try booting with the "irqpoll" option) >> Sep 19 16:59:25 spindle warning: [3447698.287291] Pid: 0, comm: swapper/4 Not tainted 3.5.1-dirty #1 >> Sep 19 16:59:25 spindle warning: [3447698.287522] Call Trace: >> Sep 19 16:59:25 spindle warning: [3447698.287754] [] __report_bad_irq+0x31/0xc2 >> Sep 19 16:59:25 spindle warning: [3447698.288031] [] note_interrupt+0x16a/0x1e8 >> Sep 19 16:59:25 spindle warning: [3447698.288263] [] handle_irq_event_percpu+0x163/0x1a5 >> Sep 19 16:59:25 spindle warning: [3447698.288497] [] handle_irq_event+0x38/0x55 >> Sep 19 16:59:25 spindle warning: [3447698.288727] [] handle_fasteoi_irq+0x78/0xab >> Sep 19 16:59:25 spindle warning: [3447698.288960] [] handle_irq+0x24/0x2a >> Sep 19 16:59:25 spindle warning: [3447698.289189] [] do_IRQ+0x4d/0xb4 >> Sep 19 16:59:25 spindle warning: [3447698.289419] [] common_interrupt+0x67/0x67 >> Sep 19 16:59:25 spindle warning: [3447698.289648] [] ? acpi_idle_enter_c1+0xcb/0xf2 >> Sep 19 16:59:25 spindle warning: [3447698.289919] [] ? acpi_idle_enter_c1+0xa9/0xf2 >> Sep 19 16:59:25 spindle warning: [3447698.290152] [] cpuidle_enter+0x12/0x14 >> Sep 19 16:59:25 spindle warning: [3447698.290382] [] cpuidle_idle_call+0xc5/0x175 >> Sep 19 16:59:25 spindle warning: [3447698.290614] [] cpu_idle+0x5b/0xa5 >> Sep 19 16:59:25 spindle warning: [3447698.290844] [] start_secondary+0x1a2/0x1a6 >> Sep 19 16:59:25 spindle err: [3447698.291074] handlers: >> Sep 19 16:59:25 spindle err: [3447698.291294] [] usb_hcd_irq >> Sep 19 16:59:25 spindle emerg: [3447698.291553] Disabling IRQ #16 >> Sep 19 16:59:25 spindle err: [3447710.888187] arcmsr0: waiting for hw bus reset return, retry=0 >> Sep 19 16:59:25 spindle err: [3447720.882155] arcmsr0: waiting for hw bus reset return, retry=1 >> Sep 19 16:59:25 spindle notice: [3447730.896410] Areca RAID Controller0: F/W V1.46 2009-01-06 & Model ARC-1210 >> Sep 19 16:59:25 spindle err: [3447730.916348] arcmsr: scsi bus reset eh returns with success -- NULL && (void)