Re: [PACTH v5 1/2] usb: xhci: plat: Enable runtime PM

[Felipe Balbi <felipe.balbi@linux.intel.com>]

[-- Attachment #1: Type: text/plain, Size: 1612 bytes --]


Hi,

robert.foss@collabora.com writes:
> From: Robert Foss <robert.foss@collabora.com>
>
> Enable runtime PM for the xhci-plat device so that the parent device
> may implement runtime PM.
>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
>
> Tested-by: Robert Foss <robert.foss@collabora.com>
> ---
>  drivers/usb/host/xhci-plat.c | 29 +++++++++++++++++++++++++++--
>  1 file changed, 27 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index ed56bf9..7d3d111 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -246,6 +246,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto dealloc_usb2_hcd;
>  
> +	pm_runtime_set_active(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +
>  	return 0;
>  
>  
> @@ -274,6 +277,8 @@ static int xhci_plat_remove(struct platform_device *dev)
>  	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
>  	struct clk *clk = xhci->clk;
>  
> +	pm_runtime_disable(&dev->dev);
> +
>  	usb_remove_hcd(xhci->shared_hcd);
>  	usb_phy_shutdown(hcd->usb_phy);
>  
> @@ -292,6 +297,13 @@ static int xhci_plat_suspend(struct device *dev)
>  {
>  	struct usb_hcd	*hcd = dev_get_drvdata(dev);
>  	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
> +	int ret;
> +
> +	ret = pm_runtime_get_sync(dev);
> +	if (ret < 0) {
> +		atomic_dec(&dev->power.usage_count);

almost :-) You don't access power.usage_count directly :-)

A pm_runtime_put() should do it, but perhaps there's a better version
for this case.

-- 
balbi

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 818 bytes --]