Hello kernel hackers, I've this "funny" problem: if I netboot servers via the firmware in the network card, the system comes up normal. If I boot iPXE from a usb stick and then netboot, the megasas driver fails to init (call trace below, full dmesg attached). The system also hangs during the init for probably 30 seconds. Same kernel, same kernel parameters, same OS. I can reproduce this on Dell R815, Dell R710 with 3.5" disks, but not on Dell R710 with 2.5" disk slots. I can also reproduce this with 4.9.0-11-amd64 and 4.19.0-9-amd64 (current Debian Buster). Does anyone have an idea what the influence booting from an USB stick can have on the megasas controller? In these boxes there is a Perc H700 and I've seen the same behaviour with Perc H800 as well. I played with edd=off (which is required for some R710s), but that does not fix the problem. Any pointers are much appreciated. Best regards, Nico